CAN CSA-E60598-2-3-1998 Luminaires – Part 2 Particular requirements Section three Luminaires for road and street lighting (First Edition General Instruction No 1 June 1998 General .pdf

1、Luminaires Partie 2: Regles particulires Section trois: Luminaires declairage public Luminaires Part 2: Particular requirements Section thee: Luminaires for road and street lighting Numro de rfrence Reference number GEl/lEO 598-2-3: 1993 Norme nationale du Canada CANICSA -E60598-2-3-98 National Stan

2、dard of Canada La norme intemationale CH/IEC 598-2-3: 1993 (deuxime edition, 1993-04), y compris 1Amendement 1:1997, a t adopte, avec exigences propres aux Canada, et porte maintenant la designation CAN/CSA-E60598-2-3-98. Elle a t approuve comme Norme nationale du Canada par le Conseil canadien des

3、normes. JSSN 03 7-8935 Juin 1998 International Standard CEI/IEC 598-2-3: 1993 (second edition, 1993-04), including Amendment 1:1997, has been adopted with Canadian deviations as GSA Standard CANICSA-E60598-2-3-98, which has been approved as a National Standard of Canada by the Standards Council of C

4、anada. ISSNO37-5669 June 1998 Revision de Ia prsente publication Revision of this publication Le contenu technique des publications de la C E I est cons- tamment revu par Ia Commission afm dassurer quil reflte bien ltat actuel de Ia technique. Les renseignernents relatifs a ce travail de revision, a

5、 ltablissement des editions rvises et aux mises a jour peuvent tre obtenus auprs des Comits nationaux de la C E I et en consultant les documents ci-dessous: Bulletin de Ia C E I Annuaire de Ia C El Catalogue des publications de Ia CE I Publi annuellement Terminologie En ce qui concerne Ia terminolog

6、ie gnrale, le lecteur se repcirtera a la Publication 50 de Ia C El: Vocabulaire Electrotechnique International (VEI), qui est tablie sous forme de chapitres spars iraitant chacun dun sujet dfini, llndex g- nral la Publication 617 de Ia C El: Symboles graphiques pour schmas. Les symboles et signes co

7、ntenus dans la prsente publication ont t soit repns des Publications 27 ou 617 de la C El, soit spcifiquement approuvs aux fins de cette publication. Publications de Ia C El tablies par le mme Comit dEtudes Lattention du lecteur est attire sur le deuxime feuillet de la couverture, qui numre lea publ

8、ications de Ia C El prpares par le Comit dEtudes qui a tabli la prsente publication. The technical content of I E C publications is kept under con- stant review by the I E C, thus ensuring that the content reflects current technology. Information on the work of revision, the issue of revised edi- ti

9、ons and amendment sheets may be obtained from I E C National Committees and from the following I E C sources: I E C Bulletin IECYearbook Catalogue of I E C Publications Published yearly Terminology For general terminology, readers are referred to I E C Publi- cation 50: International Elecirotechnica

10、l Vocabulary (1EV), which is issued in the form of separate chapters each dealing with a specific field, the General Index being published as a se- parate booklet Full details of the 1EV will be supplied on request. The terms and defmitions contained in the present publication have either been taken

11、 from the 1EV or have been specifically approved for the purpose of this publication. Graphical and letter symbols For graphical symbols, and letter symbols and signs approved by the I E C for general use, readers are referred to: I E C Publication 27: Letter symbols to be used in electrical technol

12、ogy; I E C Publication 617: Graphical symbols for diagrams. The symbols and signs contained in the present publication have either been taken from IEC Publications 27 or 617, or have been specifically approved for the purpose of this publication. I E C publications prepared by the same Technical Com

13、mittee The attention of readers is drawn to the back cover, which lists I E C publications issued by the Technical Committee which has prepared the present publication. Note lutilisateur General InstructionFiche n 2 No. 2oCAN/CSA-E60598-2-3-98 CAN/CSA-E60598-2-3-98Septembre 2002 September 2002Titre

14、: Luminaires Partie 2 : Rgles particulires Title: Luminaires Part 2: ParticularSection trois : Luminaires dclairage public publie requirements Section three: Luminaires for roadinitialement en juin 1998 and street lighting originally published June 1998Les modifications suivantes aux exigences propr

15、es The following revisions to the Canadianau Canada ont t officiellement approuves. Elles deviations have been formally approved and aresont publies dans les feuilles rvises ci-jointes et marked by the symbol delta () in the margin onsont indiques par le symbole delta () dans la the attached replace

16、ment pages:marge :Modification Article 3.1 Revised Clause 3.1Ajout Aucun New NoneAbrogation Aucune Deleted NoneLa norme CAN/CSA-E60598-2-3-98 comptait CSA Standard CAN/CSA-E60598-2-3-98 originally28 pages (CSA/1 CSA/7 et 21 pages de texte). consisted of 28 pages (CSA/1CSA/7 and Elle compte maintenan

17、t les pages suivantes : 21 text). It now consists of the following pages:CSA/1 CSA/4 dates de Juin 1998 et 1 21 ; et CSA/1CSA/4 dated June 1998 and 121; andCSA/5 CSA/7 dates de Septembre 2002. CSA/5CSA/7 dated September 2002.! Insrez les feuilles rvises dans votre exemplaire ! Update your copy by in

18、serting these revisedde la norme pour la tenir jour. pages.! Conservez les pages primes titre de rfrence. ! Keep the pages you remove for reference.CAN/CSA-E60598-2-3-98 Section three: Luminaires for road and street lightingLuminaires Part 2: Particular requirements September 2002(Replaces p. CSA/5,

19、 June 1998) Canadian Standards AssociationCSA/5ForewordCanadian Standards Association provides certification services for manufacturers who, under license fromCSA, wish to use the appropriate registered CSA Marks on certain products of their manufacture toindicate conformity with CSA Standards.CSA C

20、ertification for a number of products is provided in the interest of maintaining agreed-uponstandards of quality, performance, interchangeability and/or safety, as appropriate. Where applicable,certification may form the basis for acceptance by inspection authorities responsible for enforcement ofre

21、gulations. Where feasible, programs will be developed for additional products for which certification isdesired by producers, consumers or other interests.In performing its functions in accordance with its objectives, CSA does not assume or undertake todischarge any responsibility of the manufacture

22、r or any other party. The opinions and findings of theAssociation represent its professional judgement given with due consideration to the necessarylimitations of practical operation and state of the art at the time the Standard is processed.Products in substantial accord with this Standard but whic

23、h exhibit a minor difference or a new featuremay be deemed to meet the Standard providing the feature or difference is found acceptable utilizingappropriate CSA Certification Division Operating Procedures. Products which comply with this Standardshall not be certified if they are found to have addit

24、ional features which are inconsistent with the intentof this Standard. Products shall not be certifiable if they are discovered to contravene applicable Federallaws or regulations.Testing techniques, test procedures and instrumentation frequently must be prescribed by the CSA Certification Division

25、in addition to the technical requirements contained in Standards of CSA. Inaddition to markings specified in the Standard the CSA Certification and Testing Division may requirespecial cautions, markings and instructions that are not specified by the Standard.Some tests required by CSA Standards may

26、be inherently hazardous. The Association neither assumesnor accepts any responsibility for any injury or damage that may occur during or as the result of tests,wherever performed, whether performed in whole or in part by the manufacturer or the Association,and whether or not any equipment, facility

27、or personnel for or in connection with the test is furnished bythe manufacturer or the Association.Manufacturers should note that, in the event of the failure of the CSA Certification and Testing Divisionto resolve an issue arising from the interpretation of requirements, there is an appeal procedur

28、e: thecomplainant should submit the matter, in writing, to the Secretary of the Canadian StandardsAssociation.If this Standard is to be used in obtaining CSA Certification please remember, when making applicationfor certification, to request all current Amendments, Bulletins, Notices and Technical I

29、nformation Lettersthat may be applicable and for which there may be a nominal charge. For such information or forfurther information concerning details about CSA Certification please address your inquiry to theApplications and Records Section, Canadian Standards Association, 178 Rexdale Boulevard, R

30、exdale(Toronto), Ontario M9W 1R3.CAN/CSA-E60598-2-3-98 Section trois : Luminaires dclairage publicLuminaires Partie 2 : Rgles particulires CSA/6 Association canadienne de normalisation (Remplace p. CSA/6, Juin 1998)Septembre 2002Exigences propres au CanadaLa norme internationale CEI/IEC 598-2-3:1993

31、 (deuxime dition), y compris lAmendement 1:1997, a servi llaboration de la norme CAN/CSA-E60598-2-3. Cette norme contient les exigences propres auCanada qui suivent en plus de celles nonces dans la norme CAN/CSA-E60598-1:02.3.1 Domaine dapplication)Remplacer cet article par ce qui suitCette norme dt

32、aille les prescriptions applicables aux luminaries dclairage public utiliser avec deslampes filament de tungstne, des lampes tubulaires fluorescentes et autres lampes dcharge conuespour tre installes sur des drivations dune tension nominale dau plus 600 V entre conducteurs,conformment la norme CSA C

33、22.1-02, Code canadien de llectricit, Premire partie. Elle doit tre lueconjointement avec les articles de la norme CAN/CSA-E60598-1 auxquels il est fait rfrence. 3.2 Rgles gnrales sur les essaisAjouter la note qui suitNote : Au Canada, les autorits fdral et provinciales peuvent exiger la conformit l

34、a norme CAN/CSA-C653, Performance des luminaires routiers. 3.12.1Ajouter le paragraphe qui suitAu Canada, cet article ne sapplique pas. CAN/CSA-E60598-2-3-98 Section three: Luminaires for road and street lightingLuminaires Part 2: Particular requirements September 2002(Replaces p. CSA/7, June 1998)

35、Canadian Standards AssociationCSA/7Canadian DeviationsInternational Standard CEI/IEC 598-2-3:1993 (second edition), including Amendment 1:1997, forms thebasis for CSA Standard CAN/CSA-E60598-2-3, which contains the following deviations in addition tothose shown in CSA Standard CAN/CSA-E60598-1:02.3.

36、1 Scope)Replace this clause with the followingThis Standard specifies requirements for luminaires for road and street lighting for use with tungstenfilament, tubular fluorescent, and other discharge lamps designed to be installed on branch circuits notexceeding 600 V nominal or less between conducto

37、rs in accordance with the rules of CSA StandardC22.1-02, Canadian Electrical Code, Part I. It is to be read in conjunction with those clauses of CSAStandard CAN/CSA-E60598-1 to which reference is made.3.2 General test requirementsAdd the following noteNote: In Canada, federal or provincial regulatio

38、ns may require conformance to CSA Standard CAN/CSA-C653,Performance Standard for Roadway Lighting Luminaires.3.12.1Add the following paragraphIn Canada, this Clause shall not apply.General Instruction No. 1CAN/CSA-E60598-2-3-98June 1998Title: Luminaires Part 2: Particular requirements Section three:

39、 Luminaires for road and street lightingPagination: 29 pages (CSA/1CSA/8 and 21 text)To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2006934.If you requi

40、re assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.Note lutilisateur Fiche n 1CAN/CSA-E60598-2-3-98Juin 1998Titre : Luminaires Partie 2: Rgles particulires Section tro

41、is: Luminaires dclairage publicNombre de pages : 29 pages (CSA/1 CSA/8 et 21 pages de texte)Vous devez vous inscrire pour recevoir les avis transmis par courriel au sujet des mises jour apportes ce document :allez au shop.csa.cacliquez sur Service de mises jourLe numro didentification dont vous avez

42、 besoin pour vous inscrire pour les mises jour apportes ce document est le 2006934.Si vous avez besoin daide, veuillez nous contacter par courriel au techsupportcsagroup.org ou par tlphone au 416-747-2233.Consultez la politique du Groupe CSA en matire de confidentialit au csagroup.org/legal pour sav

43、oir comment nous protgeons vos renseignements personnels.LAssociation canadienne de normalisation (CSA), sous les auspices de laquelle cette Norme nationale a t prepare, a recu ses Iettres patentes en 1919 et son accreditation au sein du Systme de normes nationales par le Conseil canadien des normes

44、 en 1973. Association daffiliation libre, sans but lucratit ni pouvoir de reglementation, elle Se consacre a Ilaboration de riormes et a Ia certification. Les normes CSA refltent le consensus de producteurs et dusagers de partout au pays, au nombre desquels se trouvent des fabricants, des consommate

45、urs, des dtaillants et des reprsentants de syndicats, de corps professionnels et dagences gouvernementales. Lutilisation des norrnes CSA est trs rpandue dans lindustrie et le commerce, et leur adoption a divers ordres de legislation, tant municipal et provincial que fdral, est chose courante, partic

46、ulirement dans les domaines de Ia sante, de Ia scurit, du btinient, de Ia construction et de Ienvironnement. Les Canadiens dun bout a lautre du pays tmoignent de leur appui au travail de normalisation men par Ia CSA en participant benvolement aux travaux des comits de a CSA et en appuyant ses object

47、its par leurs cotisations de membres de soutien. Les quelque 7000 volontaires taisant partie des comits et les 2000 membres de soutien constituent lensemble des membres de Ia CSA parmi lesquels ses administrateurs sont choisis. Les cotisations des membres de soutien representent une source important

48、e de revenu pour les services de soutien a Ia normalisation volontaire. LAssociation offre des services de certification et de mise a lessai qui appuient et completent ses activits dans le domaine de elaboration de normes. De manire a assurer Iintgrit de son processus de certification, Association p

49、rocede de facon rguliere et continue a lexamen et a linspection des produits portant Ia marque CSA. Outre son siege social et ses laboratoires a Etobicoke, Ia CSA possde des bureaux regionaux dans des centres vitaux partout au Canada, de mme que des agences dinspection et dessai dans huit pays. Depuis