CAN CSA-E61558-1-2012 Safety of power transformers power supplies reactors and similar products - Part 1 General requirements and tests (Second Edition Update No 1 February 2014).pdf

1、Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and testsScurit des transformateurs, alimentations, bobines dinductance et produits analogues Partie 1 : Exigences gnrales et essaisCAN/CSA-E61558-1:12(IEC 61558-1:2005+A1:2009, MOD)National Stan

2、dard of CanadaNorme nationale du CanadaNOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.Update No. 1CAN/CSA-E61558-1:12February 2014Note: For information about the Standards Update Service, go to shop.csa.ca or e-mail techsupportcsagroup.org.Title: Safety of power transformers, power supplies, r

3、eactors and similar products Part 1: General requirements and tests originally published July 2012The following revisions have been formally approved and are marked by the symbol delta ( in the margin on the attached replacement pages:Revised PrefaceNew NoneDeleted None Update your copy by inserting

4、 these revised pages.Keep the pages you remove for reference.Mise jour no1CAN/CSA-E61558-1:12Fvrier 2014Note : Pour plus de renseignements sur le service de mise jour des normes, allez au shop.csa.ca ou envoyez un courriel au techsupportcsagroup.org.Titre : Scurit des transformateurs, alimentations,

5、 bobines dinductance et produits analogues Partie 1 : Exigences gnrales et essais publie initialement en juillet 2012Les modifications qui suivent ont t officiellement approuves. Elles sont publies dans les feuilles rvises ci-jointes et sont indiques par le symbole delta ( dans la marge :Modificatio

6、n PrfaceAjout AucunAbrogation AucuneInsrez les feuilles rvises dans votre exemplaire de la norme pour la tenir jour.Conservez les pages primes titre de rfrence.National Standard of CanadaPublished in July 2012 by CSA GroupA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Miss

7、issauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at shop.csa.caPrepared byInternational Electrotechnical CommissionApproved byStandards Council of CanadaCAN/CSA-E61558-1:12Safety of power transformers, power supplies, reactors and similar products Part 1: General req

8、uirements and testsReviewed byTMA trade-mark of the Canadian Standards Association, operating as “CSA Group”February 2014 2014 CSA GroupCAN/CSA-E61558-1:12Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and testsCAN/CSA-E61558-1:12Safety of po

9、wer transformers, power supplies, reactors and similar products Part 1: General requirements and testsCSA PrefaceThis is the second edition of CAN/CSA-E61558-1, Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests, which is an adoption, w

10、ith Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 61558-1 (edition 2:2005 consolidated with Amendment 1:2009). This Standard supersedes the previous edition, published in 2003 as CAN/CSA-E61558-1, Safety of power transformers, power supply un

11、its and similar Part 1: General requirements and tests (adopted IEC 61558-1:1997+A1:1998). This Standard also replaces CAN/CSA-E742-94 (adopted IEC 742:1983).This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard.This Standard was reviewed for

12、Canadian adoption by the CSA Technical Committee on International Standards, under the jurisdiction of the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the Technical Committee. This Standard has been approved as a National Standard of Cana

13、da by the Standards Council of Canada.Interpretations: The Strategic Steering Committee on Requirements for Electrical Safety has provided the following direction for the interpretations of standards under its jurisdiction: “The literal text shall be used in judging compliance of products with the s

14、afety requirements of this Standard. When the literal text cannot be applied to the product, such as for new materials or construction, and when a relevant committee interpretation has not already been published, CSA Groups procedures for interpretation shall be followed to determine the intended sa

15、fety principle.” 2012 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. IEC material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpre

16、ted as “this National Standard of Canada”.Inquiries regarding this National Standard of Canada should be addressed toCSA Group5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000http:/csa.caTo purchase standards and related publications, visit our Online Stor

17、e at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.(Replaces p. CSA/8, July 2012)CSA/8Norme nationale du Canadadition franaise publie en juillet 2012 par le Groupe CSA,un organisme sans but lucratif du secteur priv.5060, Spectrum Way, bureau 100, Mississauga (Ontario) Canada L4W 5N61-

18、800-463-6727 416-747-4044Visitez notre boutique en ligne au shop.csa.caPrpare parla Commission lectrotechnique InternationaleApprouve parle Conseil canadien des normesCAN/CSA-E61558-1:12Scurit des transformateurs, alimentations, bobines dinductance et produits analogues Partie 1 : Exigences gnrales

19、et essaisRvise parMCUne marque de commerce de lAssociation canadienne de normalisation,qui exerce ses activits sous le nom Groupe CSAFvrier 2014 2014 Groupe CSACAN/CSA-E61558-1:12Scurit des transformateurs, alimentations, bobines dinductance et produits analogues Partie 1 : Exigences gnrales et essa

20、isCAN/CSA-E61558-1:12Scurit des transformateurs, alimentations, bobines dinductance et produits analogues Partie 1 : Exigences gnrales et essaisPrface CSACe document constitue la deuxime dition de la CAN/CSA-E61558-1, Scurit des transformateurs, alimentations, bobines dinductance et produits analogu

21、es Partie 1 : Exigences gnrales et essais. Il sagit de ladoption, avec exigences propres au Canada, de la norme CEI (Commission lectrotechnique Internationale) 61558-1 (dition 2:2005 consolide par lamendement 1:2009) qui porte le mme titre. Cette norme remplace ldition antrieure, publie en 2003 et q

22、ui portait la dsignation CAN/CSA-E61558-1, Scurit des transformateurs, blocs dalimentation et analogues Partie 1 : Rgles gnrales et essais (norme CEI 61558-1:1997+A1:1998 adopte). Cette norme remplace aussi la CAN/CSA-E742-94 (norme CEI 742:1983).Cette norme est juge convenable lvaluation de la conf

23、ormit selon le domaine dapplication tabli dans la norme.Cette norme a t rvise en vue de son adoption au Canada par le Comit technique CSA sur les normes internationales, sous lautorit du Comit directeur stratgique CSA sur les exigences en matire de scurit lectricit, et a t officiellement approuve pa

24、r le Comit technique. Cette norme a t approuve en tant que Norme nationale du Canada par le Conseil canadien des normes.Interprtations : Le Comit directeur stratgique sur les exigences en matire de scurit lectricit a mis la directive qui suit quant linterprtation des normes qui relvent de sa compten

25、ce : Il convient de sappuyer sur le texte littral pour juger de la conformit des produits aux exigences de scurit de cette norme. Si le texte littral ne sapplique pas un produit, en raison dun nouveau matriel ou dune nouvelle construction, et si aucune interprtation pertinente na t produite par un c

26、omit CSA comptent, il convient de consulter les procdures du Groupe CSA en matire dinterprtation afin de dterminer lintention quant au principe de scurit. 2012 Groupe CSATous droits rservs. Aucune partie de cette publication ne peut tre reproduite par quelque moyen que ce soit sans la permission pra

27、lable de lditeur. Limpression du document CEI a t autorise. Si le texte dit cette Norme internationale, le lecteur doit comprendre cette Norme nationale du Canada.Toute demande de renseignements sur cette Norme nationale du Canada devrait tre adresse Groupe CSA5060, Spectrum Way, bureau 100, Mississ

28、auga (Ontario) Canada L4W 5N61-800-463-6727 416-747-4000http:/csa.caPour acheter des normes et autres publications du Groupe CSA, allez au shop.csa.ca ou composez le 1-800-463-6727 ou le 416-747-4044.(Remplace p. CSA/18, juillet 2012) CSA/18Standards Update ServiceCAN/CSA-E61558-1:12July 2012Title:

29、Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and testsPagination: 347 pages (CSA/1CSA/26 and 321 text)To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you

30、will need to register for updates to this publication is 2421985.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.Service de mise jour des normesCAN/CSA-

31、E61558-1:12Juillet 2012Titre : Scurit des transformateurs, alimentations, bobines dinductance et produits analogues Partie 1 : Exigences gnrales et essaisNombre de pages : 347 pages (CSA/1 CSA/26 et 321 pages de texte)Vous devez vous inscrire pour recevoir les avis transmis par courriel au sujet des

32、 mises jour apportes ce document :allez au shop.csa.cacliquez sur Service de mises jourLe numro didentification dont vous avez besoin pour vous inscrire pour les mises jour apportes ce document est le 2421985.Si vous avez besoin daide, veuillez nous contacter par courriel au techsupportcsagroup.org

33、ou par tlphone au 416-747-2233.Consultez la politique du Groupe CSA en matire de confidentialit au csagroup.org/legal pour savoir comment nous protgeons vos renseignements personnels.Legal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a cons

34、ensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in a

35、chieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or

36、 conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA G

37、roup makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIREC

38、T, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR

39、 ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to

40、render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA G

41、roup accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to en

42、force compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained

43、 herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitatio

44、n, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent

45、permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all s

46、uch patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of thi

47、s document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a num

48、ber of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest.Those who have a need to apply standards aree