CAN CSA-ISO IEC 10164-10A-2006 Information technology - Open Systems Interconnection - Systems Management Usage metering function for accounting purposes AMENDMENT 1 Implementation.pdf

1、B CReference numberISO/IEC 10164-10:1995/Amd.1:1998(E)INTERNATIONALSTANDARDISO/IEC10164-10First edition1995-12-15AMENDMENT 11998-12-15Information technology Open SystemsInterconnection Systems Management:Usage metering function for accountingpurposesAMENDMENT 1: Implementation conformancestatement p

2、roformasTechnologies de linformation Interconnexion de systmes ouverts(OSI) Gestion-systmes: Fonction de comptage dutilisation aux fins decomptabilitAMENDEMENT 1: Proformes de dclaration de conformit de mise enuvreAmendment 1:2006 toNational Standard of CanadaCAN/CSA-ISO/IEC 10164-10-97Amendment 1:1

3、998 to Inte rnational Standard ISO/IEC 10164-10:1995 has been adopted withoutmodification (IDT) as Amendment 1:2006 to CAN/CSA-ISO/IEC 10164-10-97. This Amendment wasreviewed by the CSA Technical Committee on Information Technology (TCIT) under the jurisdiction of theStrategic Steering Committee on

4、Information Technology and deemed acceptable for use in Canada.December 2006ISO/IEC 10164-10:1995/Amd.1:1998(E) ISO/IEC 1998All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic ormechanical, including photo

5、copying and microfilm, without permission in writing from the publisher.ISO/IEC Copyright Office Case postale 56 CH-1211 Genve 20 SwitzerlandiiiiiContents0AGE1) Subclause 2.1 . 12) Subclause 2.2 . 13) New subclause 3.7 14) Clause 4 25) New Annexes B to D 3Annex B MCS proforma 3Annex C MICS proforma

6、. 9Annex D MOCS proforma . 24Annex F MRCS proforma for name binding 46ISO/IEC ISO/IEC 10164-10:1995/Amd.1:1998(E)ISO/IEC 10164-10:1995/Amd.1:1998(E) ISO/IECivForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) formthe specialized s

7、ystem for worldwide standardization. National bodies that are members of ISO or IEC participate in thedevelopment of International Standards through technical committees established by the respective organization to dealwith particular fields of technical activity. ISO and IEC technical committees c

8、ollaborate in fields of mutual interest.Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in thework.In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. DraftInternational Sta

9、ndards adopted by the joint technical committee are circulated to national bodies for voting. Publicationas an International Standard requires approval by at least 75 % of the national bodies casting a vote.Amendment 1 to ISO/IEC 10164-10:1995 was prepared by Joint Technical Committee ISO/IEC JTC 1,

10、 Informationtechnology, Subcommittee SC 33, Distributed application services, in collaboration with ITU-T. The identical text ispublished as ITU-T Rec. X.742/Amd.1.)3/ )%#G0 G13 G0 G0 !MD G0 G0 G0 %G9)45G134G02EC G08 G0 G9 !MD G0 G0%G9 1).4%2.!4)/.!,G0G034!.$!2$c41c51c47c15c41c37c35c0c17c16c17c22c20

11、c13c17c16c0c26c0c17c25c25c21c15c33c77c68c14c17c0c26c0c17c25c25c24c0c8c37c9c41c52c53c13c52c0c50c69c67c14c0c56c14c23c20c18c0c8c17c25c25c21c9c15c33c77c68c14c17c0c8c17c25c25c23c0c37c9)45G134G0G02%#/-%.$!4)/.).b) protocol implementation conformance statement;c) system conformance statement.Amendment 1:20

12、06 toCAN/CSA-ISO/IEC 10164-10-97 )3/ )%#G0 G13 G0 G0 !MD G0 G0 G0 %G92 )45G134G02EC G08 G0 G9 !MD G0 G0%G9G9 #LAUSEG0 )NSERTG0THEG0FOLLOWINGG0ABBREVIATIONSG0BYG0ALPHABETICALG0ORDER ICS Implementation Conformance StatementMCS Management Conformance SummaryMICS Management Information Conformance State

13、mentMIDS Management Information Definition StatementMOCS Managed Object Conformance StatementMRCS Managed Relationship Conformance StatementPICS Protocol Implementation Conformance Statement)3/ )%#G0 G13 G0 G0 !MD G0 G0 G0 %G9)45G134G02EC G08 G0 G9 !MD G0 G0%G9 3G9 .EWG0!NNEXESG0“ G0# G0$G0ANDG0o Op

14、tional;c Conditional;x Prohibited; Not applicable or out of scope.NOTE 1 c, m, and o are prefixed by a c: when nested under a conditional or optional item of the same table;NOTE 2 o may be suffixed by .N (where N is a unique number) for mutually exclusive or selectable options among a set ofstatus v

15、alues. Support of at least one of the choices (from the items with the same values of N) is required.For all annexes of this Recommendation | International Standard, the following common notations, defined in CCITTRec. X.291 | ISO/IEC 9646-2 and ITU-T Rec. X.296 | ISO/IEC 9646-7 are used for the Sup

16、port column:Y Implemented;N Not implemented; No answer required;Ig The item is ignored (i.e. processed syntactically but not semantically).“ 4ABLEG0FORMATSome of the tables in this Recommendation | International Standard have been split because the information is too wideto fit on the page. Where th

17、is occurs, the index number of the first block of columns are the index numbers of thecorresponding rows of the remaining blocks of columns. A complete table reconstructed from the constituent partsshould have the following layout:_1)#OPYRIGHTG0RELEASEG0FORG0-#3G0PROFORMAUsers of this Recommendation

18、 | International Standard may freely reproduce the MCS proforma in this annex so that it can beused for its intended purpose, and may further publish the completed MCS. Instructions for completing the MCS proforma arespecified in ITU-T Rec. X.724 | ISO/IEC 10165-6.Index First block of columns Second

19、 block of columns Etc.Amendment 1:2006 toCAN/CSA-ISO/IEC 10164-10-97 )3/ )%#G0 G13 G0 G0 !MD G0 G0 G0 %G94 )45G134G02EC G08 G0 G9 !MD G0 G0%G9In this Recommendation | International Standard the constituent parts of the table appear consecutively, starting with thefirst block of columns.When a table

20、with subrows is too wide to fit on a page, the continuation tables(s) have been constructed with indexnumbers identical to the index numbers in the corresponding rows of the first table, and with subindex numberscorresponding to the subrows within each indexed row. For example, if Table X.1 has 2 ro

21、ws and the continuation ofTable X.1 has 2 subrows for each row, the tables are presented as follows:4ABLEG08 G0 G04ITLE4ABLEG08 G0 CONTINUEDG9A complete table reconstructed from the constituent parts should have the following layout:References made to cells within tables shall be interpreted as refe

22、rences within reconstructed tables. In the example,above, the reference X.1/1d corresponds with the blank cell in the column G for row with Index 1, and X.1/1.2bcorresponds to the blank cell in column L for row with Subindex 1.2“ )DENTIFICATIONG0OFG0THEG0IMPLEMENTATION“ $ATEG0OFG0STATEMENTThe suppli

23、er of the implementation shall enter the date of this statement in the box below. Use theformat DD-MM-YYYY.SupportIndex A B C D E F G1ab2aIndex Subindex H I J K L1 1.1 h i j1.2 h i j2 2.1 h i j2.2 h i jSupportIndex A B C D E F G Subindex H I J K L1 a b 1.1 h i j1.2 h i j2 a b 2.1 h i j2.2 h i jDate

24、of statement)3/ )%#G0 G13 G0 G0 !MD G0 G0 G0 %G9)45G134G02EC G08 G0 G9 !MD G0 G0%G9 5“ )DENTIFICATIONG0OFG0THEG0IMPLEMENTATIONThe supplier of the implementation shall enter information necessary to uniquely identify the implementation and thesystem(s) in which it may reside, in the box below.“ #ONTA

25、CTThe supplier of the implementation shall provide information on whom to contact if there are any queries concerning thecontent of the MCS, in the box below.“ )DENTIFICATIONG0 OFG0 THEG0 2ECOMMENDATIONG0 G0 )NTERNATIONALG0 3TANDARDG0 ING0 WHICHG0 THEG0 MANAGEMENTINFORMATIONG0ISG0DEFINEDThe supplier

26、 of the implementation shall enter the title, reference number and date of the publication of theRecommendation | International Standard which specifies the management information to which conformance isclaimed, in the box below.“ 4ECHNICALG0CORRIGENDAG0IMPLEMENTEDThe supplier of the implementation

27、shall enter the reference numbers of implemented technical corrigenda which modifythe identified Recommendation | International Standard, in the box below.“ !MENDMENTSG0IMPLEMENTEDThe supplier of the implementation shall state the titles and reference numbers of implemented amendments to theidentifi

28、ed Recommendation | International Standard, in the box below.“ -ANAGEMENTG0CONFORMANCEG0SUMMARYThe supplier of implementation shall state the capabilities and features supported and provide summary of conformanceclaims to Recommendations | International Standards using the tables in this annex.Recom

29、mendation | International Standard to which conformance is claimedAmendment 1:2006 toCAN/CSA-ISO/IEC 10164-10-97 )3/ )%#G0 G13 G0 G0 !MD G0 G0 G0 %G96 )45G134G02EC G08 G0 G9 !MD G0 G0%G9The supplier of the implementation shall specify the roles that are supported, in Table B.1.4ABLEG0“ G0 G02OLESThe

30、 supplier of the implementation shall specify support for management information in the manager role, in Table B.2.4ABLEG0“ G0 G0-ANAGERG0ROLEG0MINIMUMG0CONFORMANCEG0REQUIREMENTThe supplier of the implementation shall specify support for management information in the agent role, in Table B.3.4ABLEG0

31、“ G0 G0!GENTG0ROLEG0MINIMUMG0CONFORMANCEG0REQUIREMENT4ABLEG0“ G0 G0,OGGINGG0OFG0EVENTG0RECORDSIndex Roles supported Status Support Additional information1 Manager role support o.12 Agent role support o.1Index Item Status Support Additional information1 Operations on managed objects c12 Object creati

32、on notification from at least oneusage metering managed objectc13 Object deletion notification from at least oneusage metering managed objectc14 Attribute value change notification from at leastone usage metering managed objectc15 State change notification from at least usagemetering managed objectc

33、16 Resume metering action to usage metering controlobject managed objectc17 Start metering action to usage metering controlobject managed objectc18 Suspend metering action to usage meteringcontrol object managed objectc19 Metering resumed notification from usagemetering control object managed object

34、c110 Metering started notification from usage meteringcontrol object managed objectc111 Metering suspended notification from usagemetering control object managed objectc112 Usage report notification from usage meteringdata object managed objectc1c1: if B.1/1a then o.2 else Index Item Status Support

35、Additional information1 Usage metering control object object class c22 Usage metering data object object class c23 Usage metering record object class c2c2: if B.1/2a then o.3 else Index Item Status Support Additional information1 Does the implementation support logging of eventrecords in agent role?

36、c3c3: if B.1/2a then o.3 else )3/ )%#G0 G13 G0 G0 !MD G0 G0 G0 %G9)45G134G02EC G08 G0 G9 !MD G0 G0%G9 7NOTE Conformance to this Recommendation | International Standard does not require conformance to CCITT Rec. X.735 |ISO/IEC 10164-6.The supplier of the implementation shall provide information on cl

37、aims of conformance to any of the Recommendation |International Standards summarized in Tables B.5 to B.8. For each Recommendation | International Standard that thesupplier of the implementation claims conformance to, the corresponding conformance statement(s) shall be completed,or referenced by, th

38、e MCS. The supplier of the implementation shall complete the Support, Table numbers andAdditional information columns.In Tables B.6 to B.8, the Status column is used to indicate whether the supplier of the implementation is required tocomplete the referenced tables or referenced items. Conformance r

39、equirements are as specified in the referenced tablesor referenced items and are not changed by the value of the MCS Status column. Similarly, the Support column is usedby the supplier of the implementation to indicate completion of the referenced tables or referenced items.4ABLEG0“ G0 G00)#3G0SUPPO

40、RTG0SUMMARY4ABLEG0“ G0 G0-/#3G0SUPPORTG0SUMMARYIndex Identification of thedocument thatincludes the PICSproformaTablenumbers ofPICSproformaDescription Constraintsand valuesStatus Support Tablenumbersof PICSAdditionalinformation1 CCITT Rec. X.730 |ISO/IEC 10164-1Annex Eall tablesSM application contex

41、t oIndex Identification of thedocument thatincludes the MOCSproformaTablenumbers ofMOCSproformaDescription Constraintsand valuesStatus Support Tablenumbersof MOCSAdditionalinformation1 CCITT Rec. X.730 |ISO/IEC 10164-1Annex C objectCreation andobjectDeletion recordsc42 CCITT Rec. X.730 |ISO/IEC 1016

42、4-1Annex C attributevalueChange recordc53 CCITT Rec. X.731 |ISO/IEC 10164-2Annex Call tablesstateChangeRecord c54 ITU-T Rec. X.742 |ISO/IEC 10164-10Annex D.4 usageMeteringControlObjectc65 ITU-T Rec. X.742 |ISO/IEC 10164-10Annex D.5 usageMeteringDataObjectc76 ITU-T Rec. X.742 |ISO/IEC 10164-10Annex D

43、.6 usageMeteringRecord c8c4: if (B.3/1a or B.3/2a) and B.4/1a then m else c5: if B.3/1a and B.4/1a then m else c6: if B.3/1a then m else c7: if B.3/2a then m else c8: if (B.3/1a or B.3/3a) and B.4/1a then m else Amendment 1:2006 toCAN/CSA-ISO/IEC 10164-10-97 )3/ )%#G0 G13 G0 G0 !MD G0 G0 G0 %G98 )45

44、G134G02EC G08 G0 G9 !MD G0 G0%G94ABLEG0“ G0 G0-2#3G0SUPPORTG0SUMMARY4ABLEG0“ G0 G0-)#3G0SUPPORTG0SUMMARYIndex Identification of thedocument thatincludes the MRCSproformaTablenumbers ofMRCSproformaDescription Constraintsand valuesStatus Support Tablenumbersof MRCSAdditionalinformation1 ITU-T Rec. X.7

45、42 |ISO/IEC 10164-10Annex Fall tablesusageMeterControl-systemc92 CCITT Rec. X.735 |ISO/IEC 10164-6Annex DItem D.1/1logRecord-log c10c9: if B.3/1a then o else c10: if B.3/3a then o else Index Identification of thedocument thatincludes the MRCSproformaTablenumbers ofMICSproformaDescription Constraints

46、and valuesStatus Support Tablenumbersof MICSAdditionalinformation1 ITU-T Rec. X.742 |ISO/IEC 10164-10Tables C.1and C.4management operations c112 ITU-T Rec. X.742 |ISO/IEC 10164-10Table C.5 attributeValueChange,objectCreation,objectDeletionmeteringResumed,meteringStarted,meteringSuspended,and usageRe

47、portnotifications c124 ITU-T Rec. X.742 |ISO/IEC 10164-10Table C.6 resumeMetering,startMetering andsuspendMetering actions c13c11: if B.2/1a then m else c12: if B.2/2a or B.2/3a or B.2/4a or B.2/5a or B.2/9a or B.2/10a or B.2/11a or B.2/12a then m else c13: if B.2/6a or B.2/7a or B.2/8a then m else

48、)3/ )%#G0 G13 G0 G0 !MD G0 G0 G0 %G9)45G134G02EC G08 G0 G9 !MD G0 G0%G9 9!NNEXG0G0#2)-)#3G0PROFORMA(This annex forms an integral part of this Recommendation | International Standard)# )NTRODUCTIONThe purpose of this MICS proforma is to provide a mechanism for a supplier of an implementation which claimsconformance, in the manager role, to management information specified in this Re