1、INTERNATIONAL STANDARD ISO/lEe 10164-5 First edition 1993-06-15 Information technology - Open Systems Interconnection - Systems Management: Event Report Management Function Technologies de Iinformation - Interconnexion de systemes ouverts (OSI) - Gestion-systemes: Fonction de gestion de rapport even
2、ementiel National Standard of Canada CAN/CSA-ISO/IEC-10164-S-9S International Standard ISO/IEC 10164-5:1993 and Technical Corrigendum 1:1994 have been adopted, without modification, as CAN/CSA-ISO/IEC-10164-5-95, which has been approved as a National Standard of Canada by the Standards Council of Ca
3、nada. December 1995 Reference nU:l1ber ISO/lEe 10164-5:1993(E) Technical Corrigendum 2:2003 toNational Standard of CanadaCAN/CSA-ISO/IEC 10164-5-95Technical Corrigendum 2:1999 to International Standard ISO/IEC 10164-5:1993 has been adopted withoutmodification as Technical Corrigendum 2:2003 to CAN/C
4、SA-ISO/IEC 10164-5-95. This Technical Corrigendumwas reviewed by the CSA Technical Committee on Information Technology (TCIT) under the jurisdiction of theStrategic Steering Committee on Information Technology and deemed acceptable for use in Canada. July 2003ISO/IEC 10164-5 : 1993/Cor.2 : 1999 (E)
5、ITU-T Rec. X.734 (1992)/Cor.2 (1999 E) 1 INTERNATIONAL STANDARD ISO/IEC 10164-5 : 1993/Cor.2 : 1999 (E) ITU-T Rec. X.734 (1992)/Cor.2 (1999 E) ITU-T RECOMMENDATION INFORMATION TECHNOLOGY OPEN SYSTEMS INTERCONNECTION SYSTEMS MANAGEMENT: EVENT REPORT MANAGEMENT FUNCTION TECHNICAL CORRIGENDUM 2 1) Subc
6、lause 8.1.1.1 Replace the 9th paragraph: Changes to values of attributes other than administrative state, operational state and, if present, availability status, shall be reported using the attribute value change notification. by When changes to attribute values are to be reported, the attribute val
7、ue change notification shall be used. 2) Subclause 8.1.1.3.2 Add to the end: A change in the discriminatorConstruct attribute results in an attribute value change notification. 3) Subclause 8.1.1.5.3 Add to the end: A change in the intervalsofDay attribute results in an attribute value change notifi
8、cation. 4) Subclause 8.1.1.5.4 Add to the end: A change in the weekMask attribute results in an attribute value change notification. 5) Subclause 8.1.1.5.5 Add to the end: A change in the schedulerName attribute results in an attribute value change notification. 6) Subclause 8.1.2.1 Add to the end:
9、A change in the destination attribute results in an attribute value change notification. ISO/IEC 10164-5 : 1993/Cor.2 : 1999 (E) 2 ITU-T Rec. X.734 (1992)/Cor.2 (1999 E) 7) Subclause 8.1.2.2.1 Add to the end: A change in the backupDestinationList attribute results in an attribute value change notifi
10、cation. 8) Subclause 8.1.2.2.2 Add to the end: A change in the activeDestination attribute results in an attribute value change notification. !SolIEe 101645 : 1993 (E) Contents Page 1 Scope . . 2 Normative references . . 2.1 Identical Recommendations I International Standards . . 2.2 Paired Recommen
11、dations I International Standards equivalent in technical content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.3 Additional references . 2 3 Deflnitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3.1 Basic reference model deflnitions
12、 . . . . . . . . . . . . . . . . . . . . . . . 3 3.2 Service convention deflnitions . 3 3.3 Management framework defmitions . 3 3.4 Systems management overview defmitions 3 3.5 Common management information service deflnitions 3 3.6 OSI conformance testing deflnitions . . . . . . . . . . . . . . . .
13、 . . . 3 3.7 Additional deflnitions 3 4 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5 Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 6 Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14、. . . . . . . . . . 4 7 Model for the event report management function 5 7.1 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 7.2 Event report management model . 5 8 Generic definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15、6 8.1 Managed objects 6 8.2 Imported generic defmitions . 11 9 Service definitions . . . . . . . . . . . . . . . . . . . . . . . . . 11 9.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 9.2 Initiation of event report forwarding . . . . . . . . . . . . . . . .
16、. . . . 1 1 9.3 Termination of event report forwarding. . . . . . . . . . . . . . . . . . 12 9.4 Event forwarding discriminator modiflcation, suspension and resumption . 12 9.5 Retrieval of event forwarding discriminator attributes . . . . . . . . 12 to ISO/IEC 1993 All rights reserved. No part of t
17、his publication may be reproduced or utilized in any form or by any mears, electronic or mechanical, including photocopying and microfilm, without per mission in writing from the publisher. ISO/IEC Copyright Office Case Postale 56 CH-1211 Geneve 20. Switzerland ii !SollEe 10164-5 : 1993 (E) 10 Funct
18、ional units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 11 Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3 ILl Elements of procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 13 11.2 Abstract syntax . . . . . . . . . . . . .
19、 . . . . . . . . . . . . . . . . . . 13 11.3 Negotiation of functional units 14 12 Relationship with other functions. . . . . . . . . . . . . . . . . . . . . . . . . 14 13 Confonnance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 13.1 General confonnance class requirements
20、. 15 13.2 Dependent conformance class requirements . 15 13.3 Conformance to support managed object definitions . 15 Annex A Example value notation for the discriminator construct. . . . 16 Annex B Event forwarding using local mechanism . 17 Annex C Considerations for system implementation conformanc
21、e statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 iii !SollEe 10164-5: 1993 (E) Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardiz ation. Nat
22、ional bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and lEC technical committees collaborate in fields of mutual interes
23、t. Other international organizations, governmental and non-governmental, in liaison with ISO and lEC, also take part in the work. In the field of information technology, ISO and lEC have established a joint technical committee, ISO/lEC JTC 1. Draft International Standards adopted by the joint techni
24、cal committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies.casting a vote. International Standard ISO/lEC 10164-5 was prepared by Joint Technical Committee lSO/lEC JTC 1, Information technology, in co
25、llaboration with the CCITT. The identical text is published as CCITT Recommendation X.734. ISO/lEC 10164 consists of the following parts, under the general title Information technology - Open Systems Interconnection - Systems Management: iv Part 1 : Object Management Function - Part 2 : State Manage
26、ment Function - Part 3 : Attributesfor representing relationships - Part 4: Alarm reporting function - Part 5 : Event report management function Part 6: Log controlfunction Part 7: Security alarm reporting function - Part 8: Security audit trail function Part 9: Objects and atrributes for access con
27、trol Part 10: Accounting meter function - Part 11: Workload monitoring function - Part 12: Test managementfunction - Part 13: Summarizationfunction Part 14: Confidence and diagnostic test categories !SollEe 10164-5 : 1993 (E) Introduction ISO/IEe 10164 is a multipart Standard developed according to
28、ISO 7498 and ISO/lEe 7498-4. ISO/IEe 10164 is related to the following International Standards: ISO/lEe 9595:1990, Information technology - Open Systems Interconnection -Common management information service definition; ISO/lEe 9596: 1990, Information technology - Open Systems Interconnection -Commo
29、n management information protocol; ISO/IEe 10040: 1992, Information technology - Open Systems Interconnection -Systems management overview; ISO/lEe 10165:1992, Information technology - Open Systems Interconnection -Structure of management information. v ISOIIEC 10164-5: 1993 (E) INTERNATIONAL STANDA
30、RD CCITf RECOMMENDATION INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION -SYSTEMS MANAGEMENT: EVENT REPORT MANAGEMENT FUNCTION 1 Scope This Recommendation I International Standard defines a Systems Management Function which may be used by an application process in a centralized or decentralized
31、 management environment to interact for the purpose of systems management, as defIDed by CCITI Rec. X.700 I ISO/IEC 7498-4. This Recommendation I International Standard defines the Event report management function and consists of services and two functional units. This function is positioned in the
32、application layer of ccnT Rec. X.200 I ISO 7498 and is defined according to the model provided by ISOIIEC 9545. The role of systems management functions is described in ccnT Rec. X.701 I ISOIIEC lO040. This Recommendation I International Standard establishes user requirements for the event report ma
33、nagement function; establishes models that relate the services provided by the function to user requirements; defines the services provided by the function; specifies the protocol that is necessary in order to provide the services; defIDes the relationship between the services and SMI operations and
34、 notifications; defIDes relationships with other systems management functions; specifies conformance requirements. This Recommendation I International Standard does not define the nature of any implementation intended to provide the event report management function; specify the manner in which manag
35、ement is accomplished by the user of the event report management function; defIDe the nature of any interactions which result in the use of the event report management function; specify the services necessary for the establishment, normal and abnormal release of a management association; specify the
36、 authorization requirements for the use of the event report management function or for any associated activity; define the managed objects related to the management of particular protocol machines. 2 Normative references The following CCITI Recommendations and International Standards contain provisi
37、ons which, through reference in this text, constitute provisions of this Recommendation I International Standard. At the time of publication, the editions indicated were valid. All Recommendations and Standards are subject to revision, and parties to agreements based on this Recommendation I Interna
38、tional Standard are encouraged to investigate the possibility of applying the most recent edition of the Recommendations and Standards listed below. Members of IEC and ISO maintain registers of currently valid International Standards. The CCnT Secretariat maintains a list of the currently valid CCnT
39、 Recommendations. 2.1 Identical Recommendations I International Standards CCnT Recommendation X.701 (1992) I ISO/IEC 10040:1992, Information technology - Open Systems Interconnection - Systems management overview. CCfIT Rec. X.734 (1992 E) 1 ISOIIEC 10164-5 : 1993 (E) CCITI Recommendation X.721 (199
40、2) I ISOJIEC 10165-2:1992, Information technology - Open Systems Interconnection - Structure of management information - Part 2: Definition of management Info rmation. CCITI Recommendation X.730 (1992) I ISOJIEC 10164-1:1993, Information technology - Open Systems Interconnection - Systems Management
41、 - Part I: Object management function. CCITI Recommendation X.731 (1992) I ISOJIEC 10164-2:1993, Information technology - Open Systems Interconnection - Systems Management - Part 2: State management function. 2.2 Paired Recommendations I International Standards equivalent in technical content CCITI
42、Recommendation X.200 (1988), Reference Model of Open Systems Interconnection for CCIIT Applications. ISO 7498: 1984, Information processing systems - Open Systems Interconnection - Basic Reference Model. CCITI Recommendation X.210 (1988), Open Systems Interconnection Layer Service Definition Convent
43、ions. ISOfIR 8509:1987, Information processing systems - Open Systems Interconnection - Service conventions. CCITI Recommendation X.700 (1988), Management Framework Definition for Open Systems Interconnection (OSI) for CCIIT Applications. ISOJIEC 7498-4:1989, Information processing systems - Open Sy
44、stems Interconnection - Basic Reference Model- Part 4: Management framework. CCITI Recommendation X.208 (1988), Specification of Abstract Syntax Notation One (ASN./). X.2G8, ITU, Geneva 1989. ISO/IEC 8824:1990, Information technology - Open Systems Interconnection - Specification of Abstract Syntax
45、Notation One (ASN.1). CCITI Recommendation X.209 (1988), Specification of Basic Encoding Rules for Abstract Syntax Notation One(ASN./). ISOIIEC 8825:1990, Information technology - Open Systems Interconnection - Specification of Basic Encoding Rules for Abstract Syntax Notation One (ASN.1). CCITI Rec
46、ommendation X.71O (1992), Common Management Information Service Definition for CCIIT Applications. ISOJIEC 9595:1991, Information technology - Open Systems Interconnection - Common management information service definition. CCITI Recommendation X.290 (1992), OSI Conformance Testing Methodology and F
47、ramework for protocol Recommendations for CCIIT applications - General Concepts. ISOJIEC 9646-1:1991, Information technology - Open Systems Interconnection - Conformance testing methodology andframework - Part 1: General concepts. 2.3 Additional references ISOJIEC 9545:1989, Information technology -
48、 Open Systems Interconnection - Application Layer structure. 3 Definitions For the purposes of this Recommendation I International Standard, the following definitions apply. 2 CCnT Rec. X.734 (1992 E) ISOIlEC 10164-5 : 1993 (E) 3.1 Basic reference model definitions This Recommendation I Internationa
49、l Standard makes use of the following terms defmed in CCITI Rec. X.2OO I ISO 7498. a) open system; b) systems management. 3.2 Service convention definitions This Recommendation I International Standard makes use of the following term defined in CCITI Rec. X.2lO I ISOffR 8509. primitive 3.3 Management framework definitions This Recommendation I International Standard makes use of the following terms as defined in CCITI Rec. X.700 I ISO/IEC 7498-4: a) Management information; b) Managed object; c) sys tems-ma
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1