CAN CSA-ISO IEC 10536-1-2002 Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards - Part 1 Physical characteristics.pdf

1、Reference numberISO/IEC 10536-1:2000(E)ISO/IEC 2000Identification cards Contactlessintegrated circuit(s) cards Close-coupledcards Part 1:Physical characteristicsCartes didentification Cartes circuit(s) intgr(s) sans contact Cartes couplage de proximit Partie 1: Caractristiques physiquesNational Stan

2、dard of CanadaCAN/CSA-ISO/IEC 10536-1:02(ISO/IEC 10536-1:2000)International Standard ISO/IEC 10536-1:2000 (second edition, 2000-04-15) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 10536-1:02, which has been approved as a NationalStandard of Canada by the Standards Counc

3、il of Canada.ISBN 1-55324-935-6 December 2002The Canadian Standards Association (CSA), The Standards Council of Canada is theunder whose auspices this National Standard has been coordinating body of the National Standards system, produced, was chartered in 1919 and accredited by a federation of inde

4、pendent, autonomousthe Standards Council of Canada to the National organizations working towards the furtherStandards system in 1973. It is a not-for-profit, development and improvement of voluntarynonstatutory, voluntary membership association standardization in the national interest.engaged in sta

5、ndards development and certification The principal objects of the Council are to foster activities. and promote voluntary standardization as a means CSA standards reflect a national consensus of of advancing the national economy, benefiting theproducers and users including manufacturers, health, saf

6、ety, and welfare of the public, assisting consumers, retailers, unions and professional and protecting the consumer, facilitating domestic organizations, and governmental agencies. The and international trade, and furthering internationalstandards are used widely by industry and commerce cooperation

7、 in the field of standards.and often adopted by municipal, provincial, and A National Standard of Canada is a standard whichfederal governments in their regulations, particularly has been approved by the Standards Council ofin the fields of health, safety, building and Canada and one which reflects

8、a reasonableconstruction, and the environment. agreement among the views of a number of capableIndividuals, companies, and associations across individuals whose collective interests provide to theCanada indicate their support for CSAs standards greatest practicable extent a balance ofdevelopment by

9、volunteering their time and skills to representation of producers, users, consumers, andCSA Committee work and supporting the Associations others with relevant interests, as may be appropriateobjectives through sustaining memberships. The to the subject in hand. It normally is a standardmore than 70

10、00 committee volunteers and the 2000 which is capable of making a significant and timelysustaining memberships together form CSAs total contribution to the national interest.membership from which its Directors are chosen. Approval of a standard as a National Standard ofSustaining memberships represe

11、nt a major source of Canada indicates that a standard conforms to theincome for CSAs standards development activities. criteria and procedures established by the StandardsThe Association offers certification and testing Council of Canada. Approval does not refer to theservices in support of and as a

12、n extension to its technical content of the standard; this remains thestandards development activities. To ensure the continuing responsibility of the accreditedintegrity of its certification process, the Association standards-development organization.regularly and continually audits and inspects pr

13、oducts Those who have a need to apply standards arethat bear the CSA Mark. encouraged to use National Standards of CanadaIn addition to its head office and laboratory complex whenever practicable. These standards are subject in Toronto, CSA has regional branch offices in major to periodic review; th

14、erefore, users are cautioned centres across Canada and inspection and testing to obtain the latest edition from the organizationagencies in eight countries. Since 1919, the preparing the standard.Association has developed the necessary expertise to The responsibility for approving National Standards

15、 meet its corporate mission: CSA is an independent of Canada rests with theservice organization whose mission is to provide an Standards Council of Canadaopen and effective forum for activities facilitating the 270 Albert Street, Suite 200exchange of goods and services through the use of Ottawa, Ont

16、ario, K1P 6N7standards, certification and related services to meet Canadanational and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaCette Norme nationale du Canada est offerte en angla

17、is et en franais.Although the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCAN/CSA-ISO/IEC 1053

18、6-1:02 Close-coupled cards Part 1: Physical characteristicsIdentification cards Contactless integrated circuit(s) cards December 2002 Canadian Standards Association CSA/1CAN/CSA-ISO/IEC 10536-1:02Identification cards Contactlessintegrated circuit(s) cards Close-coupled cards Part 1: Physical charact

19、eristicsCSA PrefaceStandards development within the Information Technology sector is harmonized with internationalstandards development. Through the CSA Technical Committee on Information Technology (TCIT),Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee

20、1 onInformation Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO memberbody for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of theInternational Telecommunication Union (ITU), Canada participates in the International Telegraph andTel

21、ephone Consultative Committee (ITU-T).This International Standard was reviewed by the CSA TCIT under the jurisdiction of the StrategicSteering Committee on Information Technology and deemed acceptable for use in Canada. (Acommittee membership list is available on request from the CSA Project Manager

22、.) From time to time,ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will review these documents for approvaland publication. For a listing, refer to the CSA Information Products catalogue or CSA Info Update orcontact a CSA Sales representative. This Standard has been formally approved, w

23、ithout modification, bythe Technical Committee and has been approved as a National Standard of Canada by the StandardsCouncil of Canada.December 2002 Canadian Standards Association 2002All rights reserved. No part of this publication may be reproduced in any form whatsoever without the priorpermissi

24、on of the publisher. ISO/IEC material is reprinted with permission. Where the words “thisInternational Standard” appear in the text, they should be interpreted as “this National Standard ofCanada”. Inquiries regarding this National Standard of Canada should be addressed to Canadian Standards Associa

25、tion 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 1-800-463-6727 416-747-4044www.csa.caReference numberISO/IEC 10536-1:2000(E)ISO/IEC 2000INTERNATIONALSTANDARDISO/IEC10536-1Second edition2000-04-15Identification cards Contactlessintegrated circuit(s) cards Close-coupledcards Pa

26、rt 1:Physical characteristicsCartes didentification Cartes circuit(s) intgr(s) sans contact Cartes couplage de proximit Partie 1: Caractristiques physiquesISO/IEC 10536-1:2000(E)PDF disclaimerThis PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be p

27、rinted or viewed but shall notbe edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading thisfile, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no l

28、iability in thisarea.Adobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameterswere optimized for printing. Every care has been taken to ensure that the file is su

29、itable for use by ISO member bodies. In the unlikely eventthat a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2000All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by

30、 any means, electronicor mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member bodyin the country of the requester.ISO copyright officeCase postale 56 Gb7 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 734 10 79E-mail

31、copyrightiso.chWeb www.iso.chii ISO/IEC 2000 All rights reservedISO/IEC 10536-1:2000(E) ISO/IEC 2000 All rights reserved iiiForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)form the specialized system for worldwide standardizatio

32、n. National bodies that are members of ISO or IECparticipate in the development of International Standards through technical committees established by therespective organization to deal with particular fields of technical activity. ISO and IEC technical committeescollaborate in fields of mutual inte

33、rest. Other international organizations, governmental and non-governmental, inliaison with ISO and IEC, also take part in the work.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.In the field of information technology, ISO and IEC have establi

34、shed a joint technical committee, ISO/IEC JTC 1.Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting.Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.Attention is drawn to

35、the possibility that some of the elements of this part of ISO/IEC 10536 may be the subject ofpatent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.International Standard ISO/IEC 10536-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Informat

36、iontechnology, Subcommittee SC 17, Identification cards and related devices.This second edition cancels and replaces the first edition (ISO/IEC 10536-1:1992), which has been technicallyrevised.ISO/IEC 10536 consists of the following parts, under the general title Identification cards Contactless int

37、egratedcircuit(s) cards Close-coupled cards:Gbe Part 1: Physical characteristicsGbe Part 2: Dimensions and location of coupling areasGbe Part 3: Electronic signals and reset proceduresGbe Part 4: Answer to reset and transmission protocolsAnnexes A and B of this part of ISO/IEC 10536 are for informat

38、ion only.ISO/IEC 10536-1:2000(E) ISO/IECivIntroductionISO/IEC 10536 is one of a series of International Standards describing the parameters for identification cards asdefined in ISO/IEC 7810 and the use of such cards for international interchange.This part of ISO/IEC 10536 describes the physical cha

39、racteristics of close-coupled cards.This part of ISO/IEC 10536 does not preclude the incorporation of other standard technologies on the card, suchas those referenced in the informative annex A.Contactless card Standards cover a variety of types as embodied in ISO/IEC 10536 (Close-coupled cards),ISO

40、/IEC 14443 (Proximity cards), ISO/IEC 15693 (Vicinity cards). These are intended for operation when verynear, nearby and at a longer distance from associated coupling devices respectively.ISO/IEC 10536 is intended to allow operation of Close-coupled cards in the presence of other contactless cardsco

41、nforming to ISO/IEC 14443 and ISO/IEC 15693 standards.INTERNATIONAL STANDARD ISO/IEC ISO/IEC 10536-1:2000(E)11 ScopeThis part of ISO/IEC 10536 specifies the physical characteristics of close-coupled cards (CICC). It applies toidentification cards of the card type ID-1 operating either in a slot or o

42、n the surface of a coupling device.This part of ISO/IEC 10536 shall be used in conjunction with later parts of ISO/IEC 10536.2 Normative referencesISO/IEC 7810, Identification cards - Physical characteristics.ISO/IEC 10373, Identification cards - Test methodsIEC 61000-4-2, Electromagnetic compatibil

43、ity (EMC) - Part 4: Testing and measurement techniques - Section 2:Electrostatic discharge immunity test.3 Terms and definitionsFor the purposes of this part of ISO/IEC 10536, the following definitions apply:3.1integrated circuit(s) (IC)Electronic component(s) designed to perform processing and/or m

44、emory functions.3.2contactlessPertaining to the achievement of signal exchange with and supplying power to the card without the use of galvanicelements (i.e., the absence of an ohmic path from the external interfacing equipment to the integrated circuit(s)contained within the card).3.3contactless in

45、tegrated circuit(s) cardA card of the card type ID-1 (as specified in ISO/IEC 7810) into which integrated circuit(s) have been placed and inwhich communication to such integrated circuit(s) is done in a contactless manner.The following normative documents contain provisions which, through reference

46、in this text, constitute provisions ofthis part of ISO/IEC 10536. For dated references, subsequent amendments to, or revisions of, any of thesepublications do not apply. However, parties to agreements based on this part of ISO/IEC 10536 are encouraged toinvestigate the possibility of applying the mo

47、st recent editions of the normative documents indicated below. Forundated references, the latest edition of the normative document referred to applies. Members of ISO and IECmaintain registers of currently valid International Standards.Identification cards Contactless integrated circuit(s) cards Clo

48、se-coupled cards Part 1: Physical characteristicsISO/IEC 10536-1:2000(E) ISO/IEC23.4clos e-coupled card (CICC)A card of the card type ID-1 into which integrated circuit(s) and coupling means have been placed and in whichcommunication to such integrated circuit(s) is done by inductive or capacitive c

49、oupling either in a slot or on thesurface of a coupling device.3.5clos e-coupled coupling device (CCD)The reader/writer device that uses inductive coupling to provide power to the CICC and and uses inductive orcapacitive coupling to control the data exchange with the CICC.4 Physical characteristics4.1 GeneralThe CICC shall have physical characteristics according to the requirements for the card type ID-1 specified inISO/IEC 7810.4.2 DimensionsThe nominal dimensions of the CICC shall be as for the card t