CAN CSA-ISO IEC 13818-1B-2015 Information technology - Generic coding of moving pictures and associated audio information - Part 1 Systems AMENDMENT 2 Signalling of transport files.pdf

1、 ISO/IEC 2014. CSA Group 2015. All rights reserved. Unauthorized reproduction is strictly prohibited.Amendment 2:2015 (IDT) toCAN/CSA-ISO/IEC 13818-1:15(ISO/IEC 13818-1:2013, IDT)National Standard of CanadaAmendment 2:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15Information technology Generic coding of m

2、oving pictures andassociated audio information Part 1: SystemsAMENDMENT 2: Signalling of transport files, signalling MVC viewassociation to eye and MIME type registration(ISO/IEC 13818-1:2013, IDT)Standards Update ServiceAmendment 2:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15December 2015Title: Informa

3、tion technology Generic coding of moving pictures and associated audioinformation Part 1: SystemsAMENDMENT 2: Signalling of transport files, signalling MVC view association to eye andMIME type registrationTo register for e-mail notification about any updates to this publication go to shop.csa.ca cli

4、ck on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2424060.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal inf

5、ormation.Reference numberISO/IEC 13818-1:2013/Amd.2:2014(E)ISO/IEC 2014INTERNATIONAL STANDARD ISO/IEC13818-1Fourth edition2013-06-15AMENDMENT 22014-04-15Information technology Generic coding of moving pictures and associated audio information Part 1: Systems AMENDMENT 2: Signalling of transport file

6、s, signalling MVC view association to eye and MIME type registration Technologies de linformation Codage gnrique des images animes et du son associ Partie 1: Systmes AMENDEMENT 2: Signalisation des fichiers de transport, signalisation de la vue MVC en association avec loeil et enregistrement de type

7、 MIME ISO/IEC 13818-1:2013/Amd.2:2014(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2014 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permissio

8、n in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2014 All rights reservedAmendment 2:2015 (IDT)

9、 toCAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.2:2014(E) Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC particip

10、ate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental a

11、nd non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The

12、 main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies c

13、asting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 2 to ISO/IEC 13818-1:2013 was prepared by Joint Technical Committee

14、ISO/IEC JTC 1, Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in collaboration with ITU-T. The identical text is published as Rec. ITU-T H.222.0 (2012)/ Amd.2 (01/2014). ISO/IEC 2014 All rights reserved iiiAmendment 2:2015 (IDT) toCAN/CSA

15、-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.2:2014 (E) Rec. ITU-T H.222.0 (2012)/Amd.2 (01/2014) 1 INTERNATIONAL STANDARD RECOMMENDATION ITU-T Information technology Generic coding of moving pictures and associated audio information: Systems Amendment 2 Signalling of transport profiles, signalling M

16、VC view association to eye and MIME type registration 1) Clause 2.6.1 In clause 2.6.1, replace Table 2-45 with: Table 2-45 Program and program element descriptors descriptor_tag TS PS Identification 0 n/a n/a Reserved 1 n/a X Forbidden 2 X X video_stream_descriptor 3 X X audio_stream_descriptor4 X X

17、 hierarchy_descriptor 5 X X registration_descriptor 6 X X data_stream_alignment_descriptor 7 X X target_background_grid_descriptor 8 X X video_window_descriptor 9 X X CA_descriptor 10 X X ISO_639_language_descriptor 11 X X system_clock_descriptor 12 X X multiplex_buffer_utilization_descriptor 13 X X

18、 copyright_descriptor 14 X maximum_bitrate_descriptor 15 X X private_data_indicator_descriptor 16 X X smoothing_buffer_descriptor 17 X STD_descriptor 18 X X IBP_descriptor19-26 X Defined in ISO/IEC 13818-6 27 X X MPEG-4_video_descriptor28 X X MPEG-4_audio_descriptor 29 X X IOD_descriptor 30 X SL_des

19、criptor31 X X FMC_descriptor 32 X X external_ES_ID_descriptor 33 X X MuxCode_descriptor 34 X X FmxBufferSize_descriptor 35 X multiplexBuffer_descriptor36 X X content_labeling_descriptor 37 X X metadata_pointer_descriptor 38 X X metadata_descriptor Amendment 2:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15

20、ISO/IEC 13818-1:2013/Amd.2:2014 (E) 2 Rec. ITU-T H.222.0 (2012)/Amd.2 (01/2014) Table 2-45 Program and program element descriptors descriptor_tag TS PS Identification 39 X X metadata_STD_descriptor 40 X X AVC video descriptor 41 X X IPMP_descriptor (defined in ISO/IEC 13818-11, MPEG-2 IPMP) 42 X X A

21、VC timing and HRD descriptor 43 X X MPEG-2_AAC_audio_descriptor 44 X X FlexMuxTiming_descriptor 45 X X MPEG-4_text_descriptor46 X X MPEG-4_audio_extension_descriptor 47 X X Auxiliary_video_stream_descriptor 48 X X SVC extension descriptor 49 X X MVC extension descriptor50 X n/a J2K video descriptor

22、51 X X MVC operation point descriptor 52 X X MPEG2_stereoscopic_video_format_descriptor 53 X X Stereoscopic_program_info_descriptor 54 X X Stereoscopic_video_info_descriptor 55 X n/a Transport_profile_descriptor 56-62 n/a n/a Rec. ITU-T H.222.0 | ISO/IEC 13818-1 Reserved 63 X X Extension_descriptor

23、64-255 n/a n/a User Private 2) Clause 2.6.78 Replace clause 2.6.78 with the following: 2.6.78 MVC extension descriptor For MVC video sub-bitstreams of AVC video streams conforming to one or more profiles defined in Annex H of Rec. ITU-T H.264 | ISO/IEC 14496-10, the MVC extension descriptor provides

24、 information about the AVC video stream resulting from reassembling (up to) the associated MVC video sub-bitstream and provides information about the contained MVC video sub-bitstream and for the reassembly of the associated MVC video sub-bitstream. There may be one MVC extension descriptor associat

25、ed with any of the MVC video sub-bitstreams (with stream_type equal to 0x20) of an AVC video stream conforming to one or more profiles defined in Annex H of Rec. ITU-T H.264 | ISO/IEC 14496-10. When the MVC video sub-bitstream is an MVC base view sub-bitstream, the MVC extension descriptor shall be

26、present in the associated PMT or PSM for stream_type equal to 0x1B. This descriptor can also be used by applications that require association between stereoscopic MVC views and left or right eye using the syntax elements view_association_not_present and base_view_is_left_eyeview. Amendment 2:2015 (I

27、DT) to CAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.2:2014 (E) Rec. ITU-T H.222.0 (2012)/Amd.2 (01/2014) 3 Table 2-97 MVC extension descriptor Syntax No. of bits Mnemonic MVC_extension_descriptor() descriptor_tag 8 uimsbf descriptor_length 8 uimsbf average_bit_rate 16 uimsbf maximum_bitrate 16

28、 uimsbf view_association_not_present base_view_is_left_eyeview reserved 1 1 2 bslbf bslbf bslbf view_order_index_min 10 bslbf view_order_index_max 10 bslbf temporal_id_start 3 bslbf temporal_id_end 3 bslbf no_sei_nal_unit_present 1 bslbf no_prefix_nal_unit_present 1 bslbf 3) Clause 2.6.79 Add the fo

29、llowing two semantic elements after maximum_bitrate: view_association_not_present This 1-bit flag when set to 0 indicates that the syntax element base_view_is_left_eyeview signals the association between base view and left or right eye. When this flag is set to 1 no such association is signalled. ba

30、se_view_is_left_eyeview This flag shall be set to 1 when the view_association_not_present_flag is set to 1 and no view association is conveyed in the descriptor. When the view_association_not_present_flag is set to 0 and this flag is set to 1, it indicates that the base view is associated with the l

31、eft eye view (or enhancement view is associated with the right eye view). When the view_association_not_present_flag is set to 0 and this flag is set to 0, it indicates that the base view is associated with the right eye view (or enhancement view is associated with the left eye view). 4) Clauses 2.6

32、.93 and 2.6.94 Insert the following new clauses after clause 2.6.92: 2.6.93 Transport_profile_descriptor The Transport_profile_descriptor may be associated in the PMT to signal a profile value of transport stream in the associated program. When present, the descriptor shall only be located in the lo

33、op following the program_info_length field in the PMT. If the descriptor is not included in the PMT, then the associated transport stream conforms to the strict profile. Table 2-103quater Transport_profile_descriptor syntax Syntax No. of bits Format Transport_profile_descriptor descriptor_tag 8 uims

34、bf descriptor_length 8 uimsbf transport_profile 8 uimsbfFor (i=0; iN; i+) private_data 8 bslbf Amendment 1:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.2:2014 (E) 4 Rec. ITU-T H.222.0 (2012)/Amd.2 (01/2014) 2.6.94 Semantic definition of fields in the Transport_profile_descriptor

35、transport_profile: This 8-bit profile value signals the use of constraints in the associated transport stream for the program. See Table 2-103quater. Table 2-103quinquies Transport_profile values Values Description0x00 unspecified 0x01 Complete profile (see Note 1) 0x02 Adaptive profile (see Note 2)

36、 0x03-0x0F reserved 0x0F-0xFF user_private (see Note 3) NOTE 1 Transport streams using this profile conform to all the normative definitions for transport streams. These include conformant discontinuities, PCR jitter/accuracy, strict T-STD management, PCR interval conformance (less than 100 ms), as

37、well as PTS/DTS interval (0.7 seconds) and compliance. NOTE 2 Transport streams using this profile conform to all the normative definitions for transport streams with the following exceptions: The PCR jitter may exceed the specified tolerance as applications that use this profile usually do not incl

38、ude null-PID packets. Clients that process these streams usually do not use the PCR to derive the decoder STC. However, the PCR value can be used in conjunction with the PTS and DTS for conformant STD management of all the media components in the associated program; the PCR interval occasionally exc

39、eeds 100 ms in applications that use this profile due to occasional bit rate variations in certain locations; conforming continuity counter errors and time base discontinuity may occur more frequently than in complete profile. NOTE 3 User private values of transport_profile that need unique identifi

40、cation can use the MPEG registration_descriptor with a unique format_identifier value that is obtained from the Registration Authority. 5) New Annex T Add the following after Annex S: Annex T MIME type for MPEG-2 transport streams (This annex does not form an integral part of this Recommendation | I

41、nternational Standard.) T.1 Introduction This annex provides the formal MIME type registration for MPEG-2 transport streams. It is referenced from the registry at http:/www.iana.org/. T.2 MIME type and subtype MIME media type name: video MIME subtype name: mp2t Required parameters: none Optional par

42、ameters: The profiles parameter as documented in T.2.1 The codecs parameter as document in T.2.2 Amendment 2:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.2:2014 (E) Rec. ITU-T H.222.0 (2012)/Amd.2 (01/2014) 5 Encoding considerations: This type is defined for general use; for tran

43、sfer via RTP see IETF RFC 3550. Security considerations: see T.3 Interoperability considerations: The specification defines a platform-independent expression of a presentation, and it is intended that wide interoperability can be achieved. Published specification: ITU-T H.222.0 | ISO/IEC 13818-1, In

44、formation technology Generic coding of moving pictures and associated audio information: Systems Applications that use this media type: various, including video streaming and video broadcasting applications Additional information: File extension(s): .ts Intended usage: COMMON Other information/Gener

45、al comments: none Person to contact for further information: Name: David Singer e-mail: S Change controller: ISO/IEC JTC1/SC29 (MPEG) T.3 Security considerations It is possible to inject non-compliant streams (audio, video and systems) in the transport stream to overload the receiver/decoders buffer

46、s. This might compromise the functionality of the receiver or even crash it. An MPEG-2 transport stream is an extensible container format, and hence might carry streams that have active aspects (e.g., contain script snippets). If those subsystems are not properly defined or implemented, it may be po

47、ssible to crash the receiver or temporarily make it unavailable. T.4 Parameters T.4.1 The profiles parameter Parameter Name: profiles Parameter Value: The profiles parameter is an optional parameter that indicates one or more profiles to which the stream claims conformance. The contents of this attr

48、ibute shall conform to either the pro-simple or pro-fancy productions of IETF RFC 6381, Section 4.5. The profile identifiers reported in the MIME type parameter takes as value the transport_profile, coded as a decimal integer, e.g., profiles=“1“ for streams conforming to the complete profile. Exampl

49、e: video/mp2t;profiles=“1“ Amendment 2:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.2:2014 (E) 6 Rec. ITU-T H.222.0 (2012)/Amd.2 (01/2014) T.4.2 The codecs parameter Parameter Name: codecs Parameter Value: The codecs parameter is an optional parameter that indicates one or more codecs which are used for the elementary streams in the MPEG-2 TS. The contents of this attribute shall conform to either the pro-simple or pro-fancy productions