CAN CSA-ISO IEC 13868-2004 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Inter-Exchange Signalling Prc.pdf

1、 Reference numberISO/IEC 13868:2003(E)ISO/IEC 2003Information technology Telecommunications and information exchange between systems Private Integrated Services Network Inter-exchange signalling protocol Name identification supplementary services Technologies de linformation Tlcommunications et chan

2、ge dinformation entre systmes Rseau priv intgration de services Protocole de signalisation dinterchange Services supplmentaires didentification de nom National Standard of CanadaCAN/CSA-ISO/IEC 13868:04(ISO/IEC 13868:2003)International Standard ISO/IEC 13868:2003 (second edition, 2003-04-01), has be

3、en adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 13868:04, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 1-55397-247-3 January 2004The Canadian Standards Association, which The Standards Council of Canada is theoperates under the

4、name CSA International coordinating body of the National Standards system, (CSA), under whose auspices this National Standard has a federation of independent, autonomousbeen produced, was chartered in 1919 and accredited organizations working towards the furtherby the Standards Council of Canada to

5、the National development and improvement of voluntaryStandards system in 1973. It is a not-for-profit, standardization in the national interest.nonstatutory, voluntary membership association The principal objects of the Council are to foster engaged in standards development and certification and pro

6、mote voluntary standardization as a means activities. of advancing the national economy, benefiting theCSA standards reflect a national consensus of producers health, safety, and welfare of the public, assisting and users including manufacturers, consumers, and protecting the consumer, facilitating

7、domestic retailers, unions and professional organizations, and and international trade, and furthering internationalgovernmental agencies. The standards are used widely cooperation in the field of standards.by industry and commerce and often adopted by A National Standard of Canada is a standard whi

8、chmunicipal, provincial, and federal governments in their has been approved by the Standards Council ofregulations, particularly in the fields of health, safety, Canada and one which reflects a reasonablebuilding and construction, and the environment. agreement among the views of a number of capable

9、Individuals, companies, and associations across Canada individuals whose collective interests provide to theindicate their support for CSAs standards development greatest practicable extent a balance ofby volunteering their time and skills to CSA Committee representation of producers, users, consume

10、rs, andwork and supporting the Associations objectives others with relevant interests, as may be appropriatethrough sustaining memberships. The more than 7000 to the subject in hand. It normally is a standardcommittee volunteers and the 2000 sustaining which is capable of making a significant and ti

11、melymemberships together form CSAs total membership contribution to the national interest.from which its Directors are chosen. Sustaining Approval of a standard as a National Standard ofmemberships represent a major source of income for Canada indicates that a standard conforms to theCSAs standards

12、development activities. criteria and procedures established by the StandardsThe Association offers certification and testing services Council of Canada. Approval does not refer to thein support of and as an extension to its standards technical content of the standard; this remains thedevelopment act

13、ivities. To ensure the integrity of its continuing responsibility of the accreditedcertification process, the Association regularly and standards-development organization.continually audits and inspects products that bear the Those who have a need to apply standards areCSA Mark. encouraged to use Na

14、tional Standards of CanadaIn addition to its head office and laboratory complex in whenever practicable. These standards are subject Toronto, CSA has regional branch offices in major to periodic review; therefore, users are cautioned centres across Canada and inspection and testing to obtain the lat

15、est edition from the organizationagencies in eight countries. Since 1919, the Association preparing the standard.has developed the necessary expertise to meet its The responsibility for approving National Standards corporate mission: CSA is an independent service of Canada rests with theorganization

16、 whose mission is to provide an open and Standards Council of Canadaeffective forum for activities facilitating the exchange of 270 Albert Street, Suite 200goods and services through the use of standards, Ottawa, Ontario, K1P 6N7certification and related services to meet national and Canadainternati

17、onal needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the

18、 users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationInformation technology Telecommunications and informationexchange between systems Private Integrated ServicesNetwork Inter-exchange signalling protocol CAN/CSA-ISO/IEC 13868:04 Name id

19、entification supplementary servicesJanuary 2004 CSA/1CAN/CSA-ISO/IEC 13868:04Information technology Telecommunications andinformation exchange betweensystems Private IntegratedServices Network Inter-exchangesignalling protocol Nameidentification supplementary serviceCSA PrefaceStandards development

20、within the Information Technology sector is harmonized with internationalstandards development. Through the CSA Technical Committee on Information Technology (TCIT),Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1

21、) for the Standards Council of Canada (SCC), the ISO memberbody for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of theInternational Telecommunication Union (ITU), Canada participates in the International Telegraph andTelephone Consultative Committee (ITU-T).Th

22、is Standard supersedes CAN/CSA-ISO/IEC 13868-97 (adoption of ISO/IEC 13868:1995).This International Standard was reviewed by the CSA TCIT under the jurisdiction of the StrategicSteering Committee on Information Technology and deemed acceptable for use in Canada. (Acommittee membership list is availa

23、ble on request from the CSA Project Manager.) From time to time,ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will review these documents for approvaland publication. For a listing, refer to the CSA Information Products catalogue or CSA Info Update orcontact a CSA Sales representative.

24、This Standard has been formally approved, without modification, by the Technical Committee and has been approved as a National Standard of Canada by the StandardsCouncil of CanadaJanuary 2004 Canadian Standards Association 2004All rights reserved. No part of this publication may be reproduced in any

25、 form whatsoever without the prior permission ofthe publisher. ISO/IEC material is reprinted with permission. Where the words “this International Standard” appear in thetext, they should be interpreted as “this National Standard of Canada”. Inquiries regarding this National Standard of Canada should

26、 be addressed to Canadian Standards Association 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 1-800-463-6727 416-747-4044www.csa.caReference numberISO/IEC 13868:2003(E)ISO/IEC 2003INTERNATIONAL STANDARD ISO/IEC13868Second edition2003-04-01Information technology Telecommunication

27、s and information exchange between systems Private Integrated Services Network Inter-exchange signalling protocol Name identification supplementary services Technologies de linformation Tlcommunications et change dinformation entre systmes Rseau priv intgration de services Protocole de signalisation

28、 dinterchange Services supplmentaires didentification de nom ISO/IEC 13868:2003(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed

29、to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the so

30、ftware products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it

31、 is found, please inform the Central Secretariat at the address given below. ISO/IEC 2003 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without pe

32、rmission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2003 All rights reservedISO/IEC 13868:2

33、003(E) ISO/IEC 2003 All rights reserved iiiContentsForeword vIntroduction vi1 Scope 12 Conformance 13 Normative references 14 Terms and definitions 24.1 External definitions 24.2 Name 35 Acronyms 36 SS-CNIP and SS-CONP Coding Requirements 46.1 Operations 46.2 Information Elements 66.3 Messages 67 Si

34、gnalling Protocol for the Support of SS-CNIP 67.1 SS-CNIP Description 67.2 SS-CNIP Operational Requirements 77.2.1 Requirements on the Originating PINX and the Incoming Gateway PINX 77.2.2 Requirements on the Terminating PINX and the Outgoing Gateway PINX 77.2.3 Requirements on a Transit PINX 77.3 S

35、S-CNIP State Definitions 77.4 SS-CNIP Signalling Procedures for Invocation and Operation 77.4.1 Actions at the Originating PINX 77.4.2 Actions at the Terminating PINX 77.4.3 Actions at a Transit PINX 87.5 SS-CNIP Impact of Interworking with Public ISDNs or with Non-ISDNs 87.5.1 Actions at the Incomi

36、ng Gateway PINX 87.5.2 Actions at the Outgoing Gateway PINX 87.6 Protocol interactions between SS-CNIP and other supplementary services and ANFs 87.6.1 Connected Name Identification Presentation (SS-CONP) 87.6.2 Completion of Calls to Busy Subscribers (SS-CCBS) 87.6.3 Completion of Calls on No Reply

37、 (SS-CCNR) 87.6.4 Call Transfer (SS-CT) 87.6.5 Call Forwarding Unconditional (SS-CFU) 87.6.6 Call Forwarding Busy (SS-CFB) 87.6.7 Call Forwarding No Reply (SS-CFNR) 87.6.8 Call Deflection (SS-CD) 87.6.9 Path Replacement (ANF-PR) 98 Signalling Protocol for the Support of SS-CONP 98.1 SS-CONP General

38、Description 98.2 SS-CONP Operational Requirements 98.2.1 Requirements on the Terminating PINX and the Outgoing Gateway PINX 9ISO/IEC 13868:2003(E)iv ISO/IEC 2003 All rights reserved8.2.2 Requirements on the Originating PINX and the Incoming Gateway PINX 98.2.3 Requirements on a Transit PINX 98.3 SS-

39、CONP State Definitions 98.4 SS-CONP Signalling Procedures for Invocation and Operation 98.4.1 Actions at the Terminating PINX 98.4.2 Actions at the Originating PINX 108.4.3 Actions at a Transit PINX 118.5 SS-CONP Impact of Interworking with Public ISDNs or with Non-ISDNs 118.5.1 Actions at the Outgo

40、ing Gateway PINX 118.5.2 Actions at the Incoming Gateway PINX 118.6 Protocol Interaction between SS-CONP and other supplementary service and ANFs 118.6.1 Calling Name Identification Presentation (SS-CNIP) 118.6.2 Completion of Calls to Busy Subscribers (SS-CCBS) 118.6.3 Completion of Calls on No Rep

41、ly (SS-CCNR) 118.6.4 Call Transfer (SS-CT) 118.6.5 Call Forwarding Unconditional (SS-CFU) 118.6.6 Call Forwarding Busy (SS-CFB) 118.6.7 Call Forwarding No Reply (SS-CFNR) 128.6.8 Call Deflection (SS-CD) 128.6.9 Path Replacement (ANF-PR) 12AnnexesA - Protocol Implementation Conformance Statement (PIC

42、S) proforma 13B - Specification and Description Language (SDL) Representation 18C - ASN.1 definitions according to ITU-T Recs. X.208 / X.209 24ISO/IEC 13868:2003(E) ISO/IEC 2003 All rights reserved vForewordISO (the International Organization for Standardization) and IEC (the International Electrote

43、chnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical

44、activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical c

45、ommittee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulat

46、ed to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held res

47、ponsible for identifying any or all such patent rights. ISO/IEC 13868 was prepared by ECMA (as ECMA-164) and was adopted, under a special “fast-track procedure”, by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. This

48、second edition cancels and replaces the first edition (ISO/IEC 13868:1995), which has been technically revised. ISO/IEC 13868:2003(E)vi ISO/IEC 2003 All rights reservedIntroductionThis International Standard is one of a series of Standards defining services and signalling protocols applicable to Pri

49、vateIntegrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the frameworkof International Standards for Open Systems Interconnection as defined by ISO/IEC.This International Standard specifies the signalling protocol for use at the Q reference point in support of the Calling NameIdentification Presentation (CNIP) and Connected Name Identification Presentation (CONP) supplementary services. Theprotocol defined in