CAN CSA-ISO IEC 14165-114-2006 Information technology – Fibre Channel – Part 114 100 MB s balanced copper physical interface (FC-100-DF-EL-S).pdf

1、 INTERNATIONAL STANDARD ISO/IEC14165-114First edition2005-04Information technology Fibre Channel Part 114: 100 MB/s balanced copper physical interface (FC-100-DF-EL-S) Reference number ISO/IEC 14165-114:2005(E) National Standard of CanadaCAN/CSA-ISO/IEC 14165-114:06(ISO/IEC 14165-114:2005)Internatio

2、nal Standard ISO/IEC 14165-114:2005 (first edition, 2005-04) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 14165-114:06, which has been approved as aNational Standard of Canada by the Standards Council of Canada.ISBN 1-55436-358-6 December 2006 International Organization

3、 for Standardization (ISO), 2005. All rights reserved. International Electrotechnical Commission (IEC), 2005. All rights reserved. NOT FOR RESALE.Legal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the S

4、tandards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluat

5、e, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particu

6、lar purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents co

7、mpliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,

8、 INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR

9、 POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perf

10、orm any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or relianc

11、e on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property

12、rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all invention

13、s and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/o

14、r others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to t

15、he possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their

16、own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of

17、reviewing it;.search and browse this document; and.print this document. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may

18、not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may

19、not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.The Canadian Standards Association (CSA), under who

20、se auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities

21、. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governme

22、nts in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and support

23、ing the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards developmen

24、t activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark. In a

25、ddition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission: CSA is an independent

26、service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.For further information on CSA services, write toCanad

27、ian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the further development and improvement of voluntar

28、y standardization in the national interest. The principal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting the consumer, facilitating domestic an

29、d international trade, and furthering international cooperation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose col

30、lective interests provide to the greatest practicable extent a balance of representation of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the

31、 national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility o

32、f the accredited standards development organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization pre

33、paring the standard.The responsibility for approving National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remai

34、ns the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCette norme est offerte en anglais seulement pour le moment. La CSA publiera la version enfranais ds quelle sera produite par lorganisme rdacteur.Approved b

35、yStandards Council of CanadaNational Standard of CanadaPublished in December 2006 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-

36、ISO/IEC 14165-114:06Information technology Fibre Channel Part114: 100MB/s balanced copper physical interface(FC-100-DF-EL-S)Prepared by InternationalOrganizationforStandardization/ International Electrotechnical CommissionReviewed byCAN/CSA-ISO/IEC 14165-114:06Information technology Fi bre Channel P

37、art114: 100MB/sbalanced copper physical interface(FC-100-DF-EL-S)December 2006 Canadian Standards Association CSA/3CAN/CSA-ISO/IEC 14165-114:06Information technology Fibre Channel Part114: 100MB/s balanced copper physical interface(FC-100-DF-EL-S)CSA PrefaceStandards development within the Informati

38、on Technology sector is harmonized with international standards development. Through the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standard

39、s Council of Canada (SCC), the ISO member body for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee (ITU-T).At the time of pu

40、blication, ISO/IEC 14165-114:2005 is available from ISO and IEC in English only. CSA will publish the French version when it becomes available from ISO and IEC.This International Standard was reviewed by the CSA TCIT under the jurisdiction of the Strategic Steering Committee on Information Technolog

41、y and deemed acceptable for use in Canada. (A committee membership list is available on request from the CSA Project Manager.) From time to time, ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will review these documents for approval and publication. For a listing, refer to the CSA Infor

42、mation Products catalogue or CSA Info Update or contact a CSA Sales representative. This Standard has been formally approved, without modification, by the Technical Committee and has been approved as a National Standard of Canada by the Standards Council of Canada.December 2006 Canadian Standards As

43、sociation 2006All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of thepublisher. ISO/IEC material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this N

44、ational Standard of Canada”.Inquiries regarding this National Standard of Canada should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000www.csa.caTo purchase CSA Standards and related publications, visit CSAs O

45、nline Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.INTERNATIONAL STANDARD ISO/IEC14165-114First edition2005-04Information technology Fibre Channel Part 114: 100 MB/s balanced copper physical interface (FC-100-DF-EL-S) PRICE CODE ISO/IEC 2005 All rights reserved. Unless ot

46、herwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. ISO/IEC Copyright Office Case postale 56 CH-1211 Genve 20 Switzerland For price,

47、 see current catalogueH - 2 - 14165-114 ISO/IEC:2005(E) CONTENTS FOREWORD.5 INTRODUCTION.6 1 Scope 7 2 Normative references .7 3 Definitions, symbols and abbreviations8 3.1 Definitions .8 3.2 Symbols 9 3.3 Abbreviations 9 4 MAC interface 9 4.1 General .9 4.2 Overview .9 4.3 Detailed specification.10

48、 4.3.1 RD received data 10 4.3.2 RV receive valid.10 4.3.3 RE receive error.10 4.3.4 RCLK receive clock10 4.3.5 TD transmit data10 4.3.6 TV transmit valid11 4.3.7 TE transmit error11 4.3.8 TCLK transmit clock .11 4.3.9 DC characteristics11 4.3.10 MAC characteristics .11 4.3.11 MAC, GMII and MII inte

49、rfaces.11 4.4 Testing12 4.5 Data stream.12 4.6 Service control functions12 4.7 Timers.13 4.8 Delay requirements13 4.9 Reset 13 5 Operation .13 5.1 Detail of the physical interfaces .13 5.2 Signalling 14 5.3 Frame format.14 5.4 Functions at the MAC interface 15 6 Coding .15 6.1 Timers.15 6.2 Receive status OK.15 6.3 Errors15 6.4 PHY control.15 6.5 Bit error rate15 7 Test .15 7.1 General .15 7.2 Tests.16 7.3 Fixtures.16 7.4 Interoperability compliance points 16 8 Transmitter signal.16 CAN/CSA-ISO/IEC 14165-114:0614165-114 ISO/IEC:2005(E) -