CAN CSA-ISO IEC 14165-122-2006 Information technology – Fibre channel – Part 122 Arbitrated loop-2 (FC-AL-2).pdf

1、 INTERNATIONAL STANDARD ISO/IEC14165-122First edition2005-06Information technology Fibre channel Part 122: Arbitrated loop-2 (FC-AL-2) Reference number ISO/IEC 14165-122:2005(E) National Standard of CanadaCAN/CSA-ISO/IEC 14165-122:06(ISO/IEC 14165-122:2005)International Standard ISO/IEC 14165-122:20

2、05 (first edition, 2005-06) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 14165-122:06, which has been approved as aNational Standard of Canada by the Standards Council of Canada.ISBN 1-55436-361-6 December 2006 International Organization for Standardization (ISO), 2005.

3、 All rights reserved. International Electrotechnical Commission (IEC), 2005. All rights reserved. NOT FOR RESALE.Legal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This

4、process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of stand

5、ards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchanta

6、bility, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable stat

7、ute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPE

8、CIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUME

9、NT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person o

10、r entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in

11、 this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CS

12、A and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be c

13、ontained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property an

14、d may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the e

15、lements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use

16、 of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse t

17、his document; and.print this document. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this d

18、ocument in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or

19、make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.The Canadian Standards Association (CSA), under whose auspices this National Standar

20、d has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities. CSA standards reflect a nationa

21、l consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particu

22、larly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives t

23、hrough sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. The Association off

24、ers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office and la

25、boratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose missio

26、n is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spe

27、ctrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national

28、 interest. The principal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthe

29、ring international cooperation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide to the

30、greatest practicable extent a balance of representation of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest. Approval of a

31、 standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards develo

32、pment organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard.The responsib

33、ility for approving National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the user

34、s to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCette norme est offerte en anglais seulement pour le moment. La CSA publiera la version enfranais ds quelle sera produite par lorganisme rdacteur.Approved byStandards Council of CanadaNatio

35、nal Standard of CanadaPublished in December 2006 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-ISO/IEC 14165-122:06Information t

36、echnology Fibre channel Part122: Arbitrated loop-2 (FC-AL-2)Prepared by InternationalOrganizationforStandardization/ International Electrotechnical CommissionReviewed byCAN/CSA-ISO/IEC 14165-122:06Information technology Fibre channel Part122:Arbitrated loop-2 (FC-AL-2)December 2006 Canadian Standard

37、s Association CSA/3CAN/CSA-ISO/IEC 14165-122:06Information technology Fibre channel Part122: Arbitrated loop-2 (FC-AL-2)CSA PrefaceStandards development within the Information Technology sector is harmonized with international standards development. Through the CSA Technical Committee on Information

38、 Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a

39、 member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee (ITU-T).At the time of publication, ISO/IEC 14165-122:2005 is available from ISO and IEC in English only. CSA will publish the French version when it be

40、comes available from ISO and IEC.This International Standard was reviewed by the CSA TCIT under the jurisdiction of the Strategic Steering Committee on Information Technology and deemed acceptable for use in Canada. (A committee membership list is available on request from the CSA Project Manager.)

41、From time to time, ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will review these documents for approval and publication. For a listing, refer to the CSA Information Products catalogue or CSA Info Update or contact a CSA Sales representative. This Standard has been formally approved, w

42、ithout modification, by the Technical Committee and has been approved as a National Standard of Canada by the Standards Council of Canada.December 2006 Canadian Standards Association 2006All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permi

43、ssion of thepublisher. ISO/IEC material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Canada”.Inquiries regarding this National Standard of Canada should be addressed toCanadian Standards Assoc

44、iation5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000www.csa.caTo purchase CSA Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.INTERNATIONAL STANDARD ISO/IEC14165-122First edi

45、tion2005-06Information technology Fibre channel Part 122: Arbitrated loop-2 (FC-AL-2) PRICE CODE ISO/IEC 2005 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and m

46、icrofilm, without permission in writing from the publisher. ISO/IEC Copyright Office Case postale 56 CH-1211 Genve 20 Switzerland XB For price, see current catalogue 2 14165-122 ISO/IEC:2005(E) CONTENTS FOREWORD.8 INTRODUCTION.9 1 Scope.10 2 Normative references.10 3 Definitions and conventions .11

47、3.1 Definitions 11 3.2 Editorial conventions 14 3.3 Abbreviations, acronyms, and other special words.14 3.4 Symbols .17 4 Structure and concepts 17 4.0 Purpose17 4.1 Overview 17 4.2 General description 18 4.3 Access fairness algorithm.20 4.3.0 Access fairness overview.20 4.3.1 Access fairness for NL

48、_Ports.20 4.3.2 Access unfairness for NL_Ports.20 4.3.3 Access unfairness for FL_Ports .21 4.4 Relationship to FC-PH21 5 Addressing .23 5.1 Arbitrated Loop Physical Address (AL_PA) 23 5.1.1 Valid AL_PAs.25 5.1.2 Special AL_PAs and flags25 5.2 Native address identifier.25 6 FC-AL Ordered Sets 26 7 FC

49、-AL Primitive Signals and Sequences27 7.0 Overview 27 7.1 Arbitrate Primitive Signals (ARByx) 27 7.1.0 ARByx overview.27 7.1.1 ARB(AL_PA)27 7.1.2 ARB(F0).27 7.1.3 ARB(FF28 7.2 Open Primitive Signals (OPNy) 28 7.2.0 OPNy overview 28 7.2.1 Open full-duplex (OPNyx) 28 7.2.2 Open half-duplex (OPNyy).28 7.3 Open Replicate Primitive Signals (OPNr) .29 7.3.0 OPNr overview.29 7.3.1 Open selective replicate (OPNyr).29 7.3.2 Open broadcast replicate (OPNfr)29 7.4 Close Primitive Signal (CLS) 30 7.5 Dynamic Half-Duplex Primitive Signal (DHD) .30 7