CAN CSA-ISO IEC 14496-4AF-2010 Information technology - Coding of audio-visual objects - Part 4 Conformance testing AMENDMENT 32 Frame-based Animated Mesh Compression conformance.pdf

1、Information technology Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 32: Frame-based Animated Mesh Compression conformanceAmendment 32:2010 (IDT) toNational Standard of CanadaCAN/CSA-ISO/IEC 14496-4-06(ISO/IEC 14496-4:2004, IDT)NOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE

2、.CSA Standards Update ServiceAmendment 32:2010 toCAN/CSA-ISO/IEC 14496-4-06December 2010Title: Information technology Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 32: Frame-based Animated Mesh Compression conformancePagination:6 pages (iii preliminary and 3 text)To register f

3、or e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2418413.If you require assistance, please e-mail techsupportcsa.

4、ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Reference numberISO/IEC 14496-4:2004/Amd.32:2009(E)ISO/IEC 2009INTERNATIONAL STANDARD ISO/IEC14496-4Second edition2004-12-15AMENDMENT 322009-04-01Information technology

5、 Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 32: Frame-based Animated Mesh Compression conformance Technologies de linformation Codage des objets audiovisuels Partie 4: Essai de conformit AMENDEMENT 32: Conformit de compression de maille anime base sur un cadre ISO/IEC 14496

6、-4:2004/Amd.32:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

7、downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in

8、 the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the addr

9、ess given below. COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either

10、 ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2009 All rights reservedAmendment 32:2010 to CAN/CSA-ISO/IEC 14496-4-0

11、6ISO/IEC 14496-4:2004/Amd.32:2009(E) ISO/IEC 2009 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC

12、 participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, gover

13、nmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Pa

14、rt 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national

15、 bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 32 to ISO/IEC 14496-4:2004 was prepared by Joint Technical

16、Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information. ISO/IEC 14496-16 introduced several animation models as methods of deforming a mesh. This Amendment deals with conformance of the FAMC (Frame-based Animated Mesh Comp

17、ression) tool. Amendment 32:2010 to CAN/CSA-ISO/IEC 14496-4-06ISO/IEC 14496-4:2004/Amd.32:2009(E) ISO/IEC 2009 All rights reserved 1Information technology Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 32: Frame-based Animated Mesh Compression conformance After 8.5.16, add the

18、following new subclause: 8.5.17 Frame-based Animated Mesh Compression (FAMC) 8.5.17.1 Conformance Points 8.5.17.1.1 Covered functionalities The conformance points for FAMC cover The compression of different attributes per vertex, Different compression configurations (DCT, Lift, Layer-based Decomposi

19、tion) and possible combinations between, CABAC-based arithmetic encoding, Temporal, spatial and SNR scalability. The following subclauses specify the normative tests for verifying conformance of FAMC. Those normative tests make use of test data (bitstream test suites). FAMC is using the BitWrapper n

20、ode in a separate bitstream referred by a url. The following subclauses specify the normative tests for verifying conformance of FAMC compressed bitstreams and FAMC decoder. Those normative tests make use of test data (bitstream test suites). 8.5.17.2 Bitstream conformance 8.5.17.2.1 Conformance Req

21、uirements BIFS streams shall comply with the specifications in 4.3.6 of ISO/IEC 14496-16:2004/Amd.2 and BitWrapper in ISO/IEC 14496-11.Measurement procedure. 8.5.17.2.2 Tolerance BIFS streams shall comply with the specifications in 4.3.6 of ISO/IEC 14496-16:2004/Amd.2 and BitWrapper in ISO/IEC 14496

22、-11. Amendment 32:2010 to CAN/CSA-ISO/IEC 14496-4-06ISO/IEC 14496-4:2004/Amd.32:2009(E) 2 ISO/IEC 2009 All rights reserved8.5.17.3 Terminal conformance 8.5.17.3.1 Conformance Requirements A compliant decoder shall implement a decoding process that is equivalent to the one specified in ISO/IEC 14496-

23、16:2004/Amd.2 and meets all the general requirements, defined in the document, which apply for the functionalities considered. The decoder shall decode bitstreams with any options or parameters with values permitted for the functionalities. In the case of using BIFS for scene representation, the dec

24、oding process specified in ISO/IEC 14496-1:2004 shall also be implemented. 8.5.17.3.2 Test Bitstreams Files: Test Name Attribute Bitstream (.mp4) Reference file (.wrl) DCT_Troll DCT-based decoding of an animation with time varying geometry and normals Encoding parameters described in “MPEG-4TestAFXF

25、AMCTrollDCTNoScalabilitytroll_Encoding_log.txt” MPEG-4TestAFXFAMCTroll DCTNoScalabilitytroll -url.mp4 MPEG-4TestAFXFAMCTroll OriginalAnimationtroll_#.wrl DCT_Quality_Scal ability_Troll Quality scalable DCT-based decoding of an animation with time varying geometry and normals Encoding parameters desc

26、ribed in “MPEG-4TestAFXFAMCTrollDCTQualityScalabilitytroll_Encoding_log.txt” MPEG-4TestAFXFAMCTrollDCTQualityScalabilitytroll-url.mp4 MPEG-4TestAFXFAMCTroll OriginalAnimationtroll_#.wrl LIFT_Troll LIFT-based decoding of an animation with time varying geometry and normals Encoding parameters describe

27、d in “MPEG-4TestAFXFAMCTrollLIFTNoScalabilitytroll_Encoding_log.txt” MPEG-4TestAFXFAMCTrollLIFTNoScalabilitytroll-url.mp4 MPEG-4TestAFXFAMCTroll OriginalAnimationtroll_#.wrl LIFT_Quality_Scal ability_Troll Quality scalable LIFT-based decoding of an animation with time varying geometry and normals En

28、coding parameters described in “MPEG-4TestAFXFAMCTrollLIFTQualityScalabilitytroll_Encoding_log.txt” MPEG-4TestAFXFAMCTrollLIFTQualityScalabilitytroll-url.mp4 MPEG-4TestAFXFAMCTroll OriginalAnimationtroll_#.wrl LD_NoScalability_ Troll Non-scalable decoding of an animation with time varying geometry a

29、nd normals using LD LD-based encoded bit stream without scalability (one spatial layer, I and P-frames). Encoding parameters described in MPEG-4TestAFXFAMCTrollLDNoScalabilitytroll-url.mp4 MPEG-4TestAFXFAMCTroll OriginalAnimationtroll_#.wrl Amendment 32:2010 to CAN/CSA-ISO/IEC 14496-4-06ISO/IEC 1449

30、6-4:2004/Amd.32:2009(E) ISO/IEC 2009 All rights reserved 3Test Name Attribute Bitstream (.mp4) Reference file (.wrl) “MPEG-4TestAFXFAMCTrollLDNoScalabilitytroll_Encoding_log.txt” LD_SpatialScalabili ty_Troll Spatially scalable decoding of an animation with time varying geometry and normals using LD.

31、 LD-based encoded bit stream with spatial scalability (16 spatial layers, I and P-frames). Encoding parameters described in “MPEG-4TestAFXFAMCTrollLDSpatial_Scalabilitytroll_Encoding_log.txt” MPEG-4TestAFXFAMCTrollLDSpatial_Scalability troll-url.mp4 MPEG-4TestAFXFAMCTroll OriginalAnimationtroll_#.wr

32、l LD_SpatialAndTemporalScalability_ Troll Spatially and temporally scalable decoding of an animation with time varying geometry and normals using LD. LD-based encoded bit stream with spatial and temporal scalability (16 spatial layers, I, P and (hierarchical) B-frames). Encoding parameters described

33、 in “MPEG-4TestAFXFAMCTrollLDSpatial&Temporal_Scalabilitytroll_Encoding_log.txt” MPEG-4TestAFXFAMCTrollLDSpatial&Temporal_Scalabilitytroll-url.mp4 MPEG-4TestAFXFAMCTroll OriginalAnimationtroll_#.wrl DCT_LD_SpatialAndQualityScalability_Troll Spatial and quality scalable DCT-LD-based decoding of an an

34、imation with time varying geometry and normals Encoding parameters described in “MPEG-4TestAFXFAMCTrollDCT+LDSpatial&QualityScalabilitytroll_Encoding_log.txt” MPEG-4TestAFXFAMCTrollDCT+LDSpatial&QualityScalabilitytroll.mp4 MPEG-4TestAFXFAMCTroll OriginalAnimationtroll_#.wrl Lift_LD_SpatialAndQuality

35、Scalability_ Troll Spatial and quality scalable Lift-LD-based decoding of an animation with time varying geometry and normals Encoding parameters described in “MPEG-4TestAFXFAMCTrollLift+LDSpatial&QualityScalabilitytroll_Encoding_log.txt” MPEG-4TestAFXFAMCTrollLift+LDSpatial&QualityScalabilitytroll.

36、mp4 MPEG-4TestAFXFAMCTroll OriginalAnimationtroll_#.wrl 8.5.17.3.3 Measurement Procedure The terminal should produce a formatted output giving a temporal sequence of IndexedFaceSet structure. The decoder shall be able to decode the bitstreams provided as described in 8.5.17.4.2. 8.5.17.3.4 Tolerance

37、 The diagnosis is to check whether the field data (vertex attributes) of the IndexedFaceSet sequence that is decoded from “.mp4” files correspond with the sequence included in the provided reference “*_#.wrl” files (e.g. “troll_0.wrl” to “troll_35.wrl”). Amendment 32:2010 to CAN/CSA-ISO/IEC 14496-4-

38、06ISO/IEC 14496-4:2004/Amd.32:2009(E) ICS 35.040 ISO/IEC 2009 All rights reserved Copyright NoticeThis Amendment to the International Standard contains information copyright protected by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).

39、 Except as permitted under the laws of Canada, no extract of this Amendment to the International Standard may be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photocopying, recording, or otherwise, without prior permission from the Standards Coun

40、cil of Canada (SCC). Requests for permission to reproduce this Amendment to the International Standard or parts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this Amendment t

41、o the International Standard contains information copyright protected by the Canadian Standards Association. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the publisher. ISO/IEC material is reprinted with permission. R

42、equests for permission to reproduce this adopted Amendment or parts thereof should be addressed to Manager, Sales Canadian Standards Association 5060 Spectrum Way, Suite 100 Mississauga, Ontario L4W 5N6Copyright violators will be prosecuted to the full extent of the law.PRINTED IN CANADAIMPRIMEAU CANADA100%The Canadian Standards Association (CSA) prints its publications on Rolland Enviro100, which contains 100% recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.