CAN CSA-ISO IEC 14496-4E-2006 Information technology - Coding of audio-visual objects - Part 4 Conformance testing AMENDMENT 5 Conformance extensions for error-resilient simple sca.pdf

1、 Reference numberISO/IEC 14496-4:2004/Amd.5:2005(E)ISO/IEC 2005Information technology Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 5: Conformance extensions for error-resilient simple scalable profile Technologies de linformation Codage des objets audiovisuels Partie 4: Essai

2、 de conformit AMENDEMENT 5: Extensions de conformit pour profil error-resilient simple scalable International Organization for Standardization (ISO), 2005. All rights reserved. International Electrotechnical Commission (IEC), 2005. All rights reserved. NOT FOR RESALE. Amendment 5:2006 toNational Sta

3、ndard of CanadaCAN/CSA-ISO/IEC 14496-4:06Amendment 5:2005 to International Standard ISO/IEC 14496-4:2004 has been adopted withoutmodification (IDT) as Amendment 5:2006 to CAN/CSA-ISO/IEC 14496-4:06. This Amendment was reviewedby the CSA Technical Committee on Information Technology (TCIT) under the

4、jurisdiction of the StrategicSteering Committee on Information Technology and deemed acceptable for use in Canada.December 2006(reaffirmed 2011)ISO/IEC 14496-4:2004/Amd.5:2005(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be

5、 printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts

6、no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the fi

7、le is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2005 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any

8、form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 g120 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22

9、 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2005 All rights reservedAmendment 5:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.5:2005(E) ISO/IEC 2005 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Elect

10、rotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of techni

11、cal activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technic

12、al committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circ

13、ulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held

14、 responsible for identifying any or all such patent rights. Amendment 5 to ISO/IEC 14496-4:2004 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information. Amendment 5:2006 toCAN/CSA-ISO/IEC 144

15、96-4:06ISO/IEC 14496-4:2004/Amd.5:2005(E) iv ISO/IEC 2005 All rights reservedIntroduction In ISO/IEC 14496-2:2004, the bitstream syntax of the Simple Scalable Profile does not allow the use of the error resilience tools. As the enhancement layer can only be decoded if it is received error-free this

16、limits the use of scalable video to error-free communication environments. This would exclude mobile communications, a significant future market for MPEG-4 SSP. Scalable video can be quite useful in many other applications. For instance, matching different or varying network bandwidths, video multic

17、ast to heterogeneous end systems and more importantly, providing different subjective quality of video content to subscribers of a given video service depending on their network tariffs and viewing preferences. As such a set of bitstreams which should be used for conformance testing of MPEG-4 Error

18、Resilient Simple Scalable Profile is proposed. Amendment 5:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.5:2005(E) ISO/IEC 2005 All rights reserved 1Information technology Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 5: Conformance extensions for error-resilient s

19、imple scalable profile Add the following to 5.5.3.1: 5.5.3.1.36 Test bitstream #L0bGE-1 Specification: This bitstream tests dynamic performance of the decoder. It puts stress on a decoder at Level L0b of the Simple Profile. It has a bitrate close to the maximum allowed at Level L0b. It utilizes exte

20、nsively the maximum allowed VBV buffer size. The default values are used for the VBV parameters vbv_buffer_size and vbv_occupancy, as defined in Annex D of ISO/IEC 14496-2 “Video buffering verifier”. Functional stage: Prediction bandwidth Add the following subclauses after 5.5.3.3, and change the su

21、bclause numbers after those subclauses accordingly: 5.5.3.4 Conformance test conditions for Error Resilient Simple Scalable Profile For the ERSSP object the following functional tests have to be applied for testing of decoder conformance. Test Bitstreams 5.5.3.4.1 Test bitstream #A6-GE13 Specificati

22、on: Temporal scalability with P-VOP in the enhancement layer. Base layer is CIF, 10 FPS, 10 P frames between I frames, quantizer value is 8, and resync marker every 24000 bits. The enhancement layer is CIF, 10 FPS, P frames only, quantizer value is 8, and resync marker is every 24000 bits. Total num

23、ber of frames is 295. Functional stage: temporal scalability with P-VOP 5.5.3.4.2 Test bitstream #A6-GE14 Specification: Temporal scalability with P-VOP in the enhancement layer and data partitioning. Base layer is CIF, 10 FPS, 10 P frames between I frames, quantizer value is 8, and resync marker ev

24、ery 24000 bits. The enhancement layer is CIF, 10 FPS, P frames only, quantizer value is 8, and resync marker is every 24000 bits. Total number of frames is 295. Functional stage: temporal scalability with P-VOP and data partitioning Amendment 5:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/A

25、md.5:2005(E) 2 ISO/IEC 2005 All rights reserved5.5.3.4.3 Test bitstream #A6-GE15 Specification: Temporal scalability with B-VOP in the enhancement layer. Base layer is CIF, 10 FPS, 10 P frames between I frames, quantizer value is 8, and resync marker every 17000 bits. The enhancement layer is CIF, 1

26、0 FPS, P frames only, quantizer value is 8, and resync marker is every 10000 bits. Total number of frames is 159 frames. Functional stage: temporal scalability with B-VOP 5.5.3.4.4 Test bitstream #A6-GE16 Specification: Spatial scalability with P-VOP in the enhancement layer. Base layer is QCIF, 10

27、FPS, 10 P frames between I frames, quantizer value is 8, and resync marker every 500 bits. The enhancement layer is CIF, 10 FPS, P frames only, quantizer value is 8, and resync marker is every 1500 bits. Total number of frames is 60 frames. Functional stage: spatial scalability with P-VOP 5.5.3.4.5

28、Test bitstream #A6-GE17 Specification: Spatial scalability with P-VOP in the enhancement layer and data partitioning. Base layer is QCIF, 10 FPS, 10 P frames between I frames, quantizer value is 8, and resync marker every 500 bits. The enhancement layer is CIF, 10 FPS, P frames only, quantizer value

29、 is 8, and resync marker is every 1500 bits. Total number of frames is 60 frames. Functional stage: spatial scalability with P-VOP and data partitioning 5.5.3.4.6 Test bitstream #A6-GE18 Specification: Spatial scalability with B-VOP in the enhancement layer. Base layer is QCIF, 10 FPS, 10 P frames b

30、etween I frames, quantizer value is 8, and resync marker every 500 bits. The enhancement layer is CIF, 10 FPS, B frames only, quantizer value is 8, and resync marker is every 1500 bits. Total number of frames is 60 frames. Functional stage: spatial scalability with B-VOP In 5.5.7, add the following

31、Table after Table 10: Table AMD5-1 Normative Test Suites for Error Resilient Simple Scalable profile NOTE Each row represents a single bitstream. Legend: S Bitstream is intended for functional test D Bitstream is intended for dynamic test X Bitstream is for functional and dynamic test Amendment 5:20

32、06 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.5:2005(E) ISO/IEC 2005 All rights reserved 3Categories Bitstream Donated by Bitstreams Name Simple Error Resilient Simple Scalable L0b L1 L2 L3 L0 L1 L2Scalability SCS-1 Sony vcon-scs1.bits S S S SCS-1_e Sony vcon-scs1_e.bits S S SCS-2 Sony vco

33、n-scs2.bits S S S SCS-2_e Sony vcon-scs2_e.bits S S SCS-3 Sony vcon-scs3.bits S S S SCS-3_e Sony vcon-scs3_e.bits S S SCS-4 Sharp vcon-scs4.cmp S S S SCS-4_e Sharp vcon-scs4_e.cmp S S SCS-5 Sharp vcon-scs5.cmp S S S SCS-6_e Sharp vcon-scs5_e.cmp S S SCS-6 Sharp vcon-scs6.cmp S S S SCS-6_e Sharp vcon

34、-scs6_e.cmp S S SCS-7 Sharp vcon-scs7.bits S S S SCS-7_e Sharp vcon-scs7_e.bits S S SCS-8 Sony vcon-scs8.bits D SCS-8_e Sony vcon-scs8_e.bits D SCS-9 Sony vcon-scs9.bits D SCS-9_e Sony vcon-scs9_e.bits D SCS-10 Sharp vcon-scs10.cmp D SCS-10_e Sharp vcon-scs10_e.cmp D SCS-11 Sharp vcon-scs11.cmp D SC

35、S-11_e Sharp vcon-scs11_e.cmp D SCS-12 PacketVideo pv_scs12.bits X SCS-12_e PacketVideo pv_scs12_e.bits X SCS-13 PacketVideo pv_scs13.bits X SCS-13_e PacketVideo pv_scs13_e.bits X SCS-14 PacketVideo pv_scs14.bits X SCS-14_e PacketVideo pv_scs14_e.bits X SCS-15 PacketVideo pv_scs15.bits X SCS-15_e Pa

36、cketVideo pv_scs15_e.bits X A6-GE13 IBM ibm_mobile_1.cmp X X A6-GE13_e IBM ibm_mobile_1_e.cmp X X A6-GE14 IBM ibm_mobile_2.cmp X X A6-GE14_e IBM ibm_mobile_2_e.cmp X X A6-GE15 IBM ibm_tempete.cmp X X A6-GE15_e IBM ibm_tempete_e.cmp X X A6-GE16 Motorola motorola_akiyo.cmp X X X A6-GE16_e Motorola mot

37、orola_akiyo_e.cmp X X A6-GE17 Motorola motorola_news.cmp X X X A6-GE17_e Motorola motorola_news_e.cmp X X A6-GE18 Motorola motorola_stefan.cmp X X X A6-GE18_e Motorola motorola_stefan_e.cmp X X General L0bGE-1 Nokia nokia_l0bge1.bits X Amendment 5:2006 toCAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:200

38、4/Amd.5:2005(E) ICS 35.040 ISO/IEC 2005 All rights reserved PRINTEDINCANADAIMPRIMEAU CANADACopyright Notice This Amendment to the International Standard contains information copyright protected by the International Organization for Standardization (ISO) and the International Electrotechnical Commiss

39、ion (IEC). Except as permitted under the laws of Canada, no extract of this Amendment to the International Standard may be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photocopying, recording, or otherwise, without prior permission from the Stan

40、dards Council of Canada (SCC). Requests for permission to reproduce this Amendment to the International Standard or parts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this A

41、mendment to the International Standard contains information copyright protected by the Canadian Standards Association. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the publisher. ISO/IEC material is reprinted with permission. Requests for permission to reproduce this adopted Amendment or parts thereof should be addressed to Director, Information Products Canadian Standards Association 5060 Spectrum Way, Suite 100 Mississauga, Ontario L4W 5N6 Copyright violators will be prosecuted to the full extent of the law.