CAN CSA-ISO IEC 14496-4I-2006 Information technology - Coding of audio-visual objects - Part 4 Conformance testing AMENDMENT 9 AVC fidelity range extensions conformance (Incorporat.pdf

1、 Reference numberISO/IEC 14496-4:2004/Amd.9:2006(E)ISO/IEC 2006 International Organization for Standardization (ISO), 2006. All rights reserved. International Electrotechnical Commission (IEC), 2006. All rights reserved. NOT FOR RESALE. Information technology Coding of audio-visual objects Part 4: C

2、onformance testing AMENDMENT 9: AVC fidelity range extensions conformance Technologies de linformation Codage des objets audiovisuels Partie 4: Essai de conformit AMENDEMENT 9: Conformit des extensions de plage de fidlit AVC Amendment 9:2006 toNational Standard of CanadaCAN/CSA-ISO/IEC 14496-4:06Ame

3、ndment 9:2006 to International Standard ISO/IEC 14496-4:2004 has been adopted withoutmodification (IDT) as Amendment 9:2006 to CAN/CSA-ISO/IEC 14496-4:06. This Amendment was reviewedby the CSA Technical Committee on Information Technology (TCIT) under the jurisdiction of the StrategicSteering Commit

4、tee on Information Technology and deemed acceptable for use in Canada.December 2006ISO/IEC 14496-4:2004/Amd.9:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefac

5、es which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Syst

6、ems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely

7、event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including pho

8、tocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2006

9、 All rights reservedICS 35.040 Ref. No. ISO/IEC 14496-4:2004/Amd.9:2006/Cor.1:2007(E) ISO/IEC 2007 All rights reserved INTERNATIONAL STANDARD ISO/IEC 14496-4:2004/Amd.9:2006 TECHNICAL CORRIGENDUM 1 Published 2007-10-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NOR

10、MALISATIONINTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION LECTROTECHNIQUE INTERNATIONALEInformation technology Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 9: AVC fidelity range extensions conformance TECHNICAL CORRIGENDUM 1 Technologies de linformation Codage des objets

11、 audiovisuels Partie 4: Essai de conformit AMENDEMENT 9: Conformit des extensions de plage de fidlit AVC RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO/IEC 14496-4:2004/Amd.9:2006 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 29, Coding of

12、audio, picture, multimedia and hypermedia information. Technical Corrigendum 1:2008 toAmendment 9:2006 toNational Standard of CanadaCAN/CSA-ISO/IEC 14496-4:06Technical Corrigendum 1:2007 to Amendment 9:2006 to International Standard ISO/IEC 14496-4:2004 hasbeen adopted without modification (IDT) as

13、Technical Corrigendum 1:2008 to Amendment 9:2006 to CSAStandard CAN/CSA-ISO/IEC 14496-4:06. This Technical Corrigendum was reviewed by the CSA TechnicalCommittee on Information Technology (TCIT) under the jurisdiction of the Strategic Steering Committee onInformation Technology and deemed acceptable

14、 for use in Canada.September 2008ISO/IEC 14496-4:2004/Amd.9:2006/Cor.1:2007(E) 2 ISO/IEC 2007 All rights reservedReplace the title of Table AMD 9-2: Table AMD 9-2 Bitstreams for High, High 10, High 4:2:2, and High 4:4:4 profile with: Table AMD 9-2 Bitstreams for High, High 10, and High 4:2:2 profile

15、 Remove the following rows from Table AMD 9-22: 4:4:4 12 bit FREH444-1 Dolby FREXT9_Dolby_C X 4 and higher 24 FREH444-2 Samsung AIT FREXT10_Samsung_A X 4 and higher 24 Replace the following rows in Table AMD 9-22: Auxiliary coded picture FREAUX-1 Apple alphaconformanceG X X X X 2.1 and higher 29.97

16、Remove the following subclause: 10.6.6.23 Test bitstreams Fidelity Range Extensions: 4:4:4 12 bit 10.6.6.23.1 Test bitstream #FREH444-1 Specification: All slices are coded as I slices. Each picture contains only one slice. disable_deblocking_filter_idc is equal to 1, specifying disabling of the debl

17、ocking filter process. entropy_coding_mode_flag is equal to 0, specifying the CAVLC parsing process. pic_order_cnt_type is equal to 0. frame_mbs_only_flag is equal to 1. chroma_format_idc is equal to 3. Both bit_depth_luma_minus8 and bit_depth_chroma_minus8 are set equal to 4. All NAL units are enca

18、psulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC 14496-10. Functional stage: Decoding of I slices for 4:4:4 12-bit Purpose: Check that the decoder can properly decode I slices for 4:4:4 12-bit. 10.6.6.23.2 Test bitstream #FREH444-2 Specification: All slices are

19、 coded as IBBP slices. Each picture contains only one slice. disable_deblocking_filter_idc is equal to 1, specifying disabling of the deblocking filter process. entropy_coding_mode_flag is equal to 1, specifying the CABAC parsing process. pic_order_cnt_type is equal to 0. frame_mbs_only_flag is equa

20、l to 1. chroma_format_idc is equal to 3. residual_colour_transform_flag is equal to 1. Both bit_depth_luma_minus8 and bit_depth_chroma_minus8 are set equal to 4. All NAL units are encapsulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC 14496-10. Functional stage:

21、Decoding of I, P, and B slices for 4:4:4 12-bit Purpose: Check that the decoder can properly decode I, P and B slices for 4:4:4 12-bit with residual colour transform. Replace: 10.6.6.24 Auxiliary coded picture 10.6.6.24.1 Test bitstream #FREAUX-1 Specification: Coded slices of an auxiliary coded pic

22、ture are included in this bitstream. The rest of the slices are coded as either an I slice or a P slice. entropy_coding_mode_flag is equal to 1, specifying the CABAC parsing process. All NAL units are encapsulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC 14496-1

23、0. Functional stage: Decoding of coded slices of an auxiliary coded picture Purpose: Check that the decoder can properly handle coded slices of an auziliary coded picture Technical Corrigendum 1:2008 toAmendment 9:2006 to CAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.9:2006/Cor.1:2007(E) ISO/IE

24、C 2007 All rights reserved 3with: 10.6.6.23 Auxiliary coded picture 10.6.6.23.1 Test bitstream #FREAUX-1 Specification: Coded slices of an auxiliary coded picture are included in this bitstream. The rest of the slices are coded as either an I slice or a P slice. entropy_coding_mode_flag is equal to

25、1, specifying the CABAC parsing process. All NAL units are encapsulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC 14496-10. Functional stage: Decoding of coded slices of an auxiliary coded picture Purpose: Check that the decoder can properly handle coded slices o

26、f an auziliary coded picture Remove the following bitstreams: FREXT9_Dolby_C FREXT10_Samsung_A Replace the following bitstream: alphaconformanceA with: alphaconformanceG Replace the following bitstreams with the electronic attachments to this Technical Corrigendum: HCBP1_HHI_A HCBP2_HHI_A Hi422FREXT

27、16_SONY_A Hi422FREXT17_SONY_A Hi422FREXT18_SONY_A Hi422FREXT19_SONY_A Hi422FR1_SONY_A Hi422FR2_SONY_A Hi422FR3_SONY_A Hi422FR4_SONY_A Hi422FR6_SONY_A Hi422FR7_SONY_A Hi422FR8_SONY_A Hi422FR9_SONY_A Technical Corrigendum 1:2008 toAmendment 9:2006 to CAN/CSA-ISO/IEC 14496-4:06ISO/IEC 14496-4:2004/Amd.

28、9:2006(E) ISO/IEC 2006 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the develop

29、ment of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmenta

30、l, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the

31、joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Att

32、ention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 6 to ISO/IEC 14496-4:2004 was prepared by Joint Technical Committee ISO/IEC JTC 1, Inf

33、ormation technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information. ISO/IEC 14496-4:2004/Amd.9:2006(E) iv ISO/IEC 2006 All rights reservedIntroduction This Recommendation | International Standard establishes conformance test requirements for conformance to ITU-T

34、 Rec. H.264 | ISO/IEC 14496-10. In this document, the additional text to ITU-T Rec. H.264.1 | ISO/IEC 14496-4 is specified for the conformance test of ITU-T Rec. H.264 | ISO/IEC 14496-10 video decoders. This specification is specifically applied to ITU-T Rec. H.264 | ISO/IEC 14496-10, AVC Fidelity R

35、ange Extensions. The following subclauses specify the normative tests for verifying conformance of ITU-T Rec. H.264 | 14496-10 video bitstreams and video decoders. Those normative tests make use of test data (bitstream test suites) provided as an electronic annex to this document, and of the referen

36、ce software decoder specified in ITU-T Rec. H.264.2 | ISO/IEC 14496-5 with source code available in electronic format. The numbering in this fidelity range extensions conformance amendment text is relative to the text of ITU-T Rec. H.264.1 | ISO/IEC 14496-4. When a numbered item (i.e., a clause, sub

37、clause, figure, table, or equation) or associated content is being replaced or modified, the same number is used for the modified numbered item. When a numbered item is inserted between prior numbered items, the number of the corresponding numbered item immediately preceding it is used and the lette

38、r a is appended to this number. When, after this one such inserted numbered item, another numbered item is inserted, the letter a is replaced by the letter b to indicate their relative order, and so on, following ordinary English alphabetical order. If text integrating this amendment with ITU-T Rec.

39、 H.264.1 | ISO/IEC 14496-4 is produced, the inserted numbered items are to be assigned the corresponding number in their numerical order without any such letters, and any subsequent numbered items are to be assigned later numbers to avoid conflicts. The purpose of the numbering convention in this am

40、endment text is to avoid renumbering of numbered items in ITU-T Rec. H.264 | ISO/IEC 14496-4 while drafting this amendment. Therefore, if the addition of a numbered item does not require renumbering of numbered items in ITU-T Rec. H.264 | ISO/IEC 14496-4, the final number is assigned to the numbered

41、 item herein. ISO/IEC 14496-4:2004/Amd.9:2006(E) ISO/IEC 2006 All rights reserved 1Information technology Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 9: AVC fidelity range extensions conformance Replace subclause 10.6.5.2 with: 10.6.5.2 Contents of bitstream file The conform

42、ance bitstreams are included in this specification as an electronic attachment. The following information is included in a single zipped file for each such bitstream. ITU-T Rec. H.264 | ISO/IEC 14496-10 video bitstream; Reconstructed pictures or hashes of decoded pictures (may not be present); Short

43、 description of the bitstream; Trace file (the bitstream in ASCII format). In cases where the reconstructed pictures or hashes of decoded pictures are not available, the reference software of ITU-T Rec. H.264.2 | ISO/IEC 14496-5 shall be used to generate the necessary reference reconstructed picture

44、s from the bitstream. Replace subclause 10.6.5.5 with: 10.6.5.5 Static tests for output order conformance Static tests of a video decoder require testing of the reconstructed samples. This subclause will explain how this test can be accomplished when the reconstructed samples at the output of the de

45、coding process are available. It may not be possible to perform this type of test with a production decoder (due to the lack of an appropriate accessible interface in the design at which to perform the test). In that case this test should be performed by the manufacturer during the design and develo

46、pment phase. Static tests are used for testing the decoding process. The test will check that the values of the samples reconstructed by the decoder under test shall be identical to the values of the samples reconstructed by the reference decoder. When a hash of the values of the samples of the deco

47、ded pictures is attached to the bitstream file, a corresponding hash operation performed on the values of the samples of the decoded pictures produced by the decoder under test shall produce the same results. Replace subclause 10.6.5.7 with: 10.6.5.7 Decoder conformance test of a particular profile-

48、and-level In order for a decoder of a particular profile-and-level to claim output order conformance to the standard as described by this Specification, the decoder shall successfully pass the static test defined in subclause 10.6.5.5 with all the bitstreams of the normative test suite specified for

49、 testing decoders of this particular profile-and-level. ISO/IEC 14496-4:2004/Amd.9:2006(E) 2 ISO/IEC 2006 All rights reservedIn order for a decoder of a particular profile and level to claim output timing conformance to the standard as described by this Specification, the decoder shall successfully pass both the static test defined in subclause 10.6.5.5 and the dynamic test defined in subclause 10.6