1、 Reference numberISO/IEC 15052:2003(E)ISO/IEC 2003Information technology Telecommunications and information exchange between systems Private Integrated Services Network Inter-exchange signalling protocol Recall supplementary service Technologies de linformation Tlcommunications et change dinformatio
2、n entre systmes Rseau priv intgration de services Protocole de signalisation dinterchange Service supplmentaire de rappel National Standard of CanadaCAN/CSA-ISO/IEC 15052:04(ISO/IEC 15052:2003)International Standard ISO/IEC 15052:2003 (second edition, 2003-04-01), has been adopted withoutmodificatio
3、n (IDT) as CSA Standard CAN/CSA-ISO/IEC 15052:04, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 1-55397-242-2 January 2004The Canadian Standards Association, which The Standards Council of Canada is theoperates under the name CSA International coordi
4、nating body of the National Standards system, (CSA), under whose auspices this National Standard has a federation of independent, autonomousbeen produced, was chartered in 1919 and accredited organizations working towards the furtherby the Standards Council of Canada to the National development and
5、improvement of voluntaryStandards system in 1973. It is a not-for-profit, standardization in the national interest.nonstatutory, voluntary membership association The principal objects of the Council are to foster engaged in standards development and certification and promote voluntary standardizatio
6、n as a means activities. of advancing the national economy, benefiting theCSA standards reflect a national consensus of producers health, safety, and welfare of the public, assisting and users including manufacturers, consumers, and protecting the consumer, facilitating domestic retailers, unions an
7、d professional organizations, and and international trade, and furthering internationalgovernmental agencies. The standards are used widely cooperation in the field of standards.by industry and commerce and often adopted by A National Standard of Canada is a standard whichmunicipal, provincial, and
8、federal governments in their has been approved by the Standards Council ofregulations, particularly in the fields of health, safety, Canada and one which reflects a reasonablebuilding and construction, and the environment. agreement among the views of a number of capableIndividuals, companies, and a
9、ssociations across Canada individuals whose collective interests provide to theindicate their support for CSAs standards development greatest practicable extent a balance ofby volunteering their time and skills to CSA Committee representation of producers, users, consumers, andwork and supporting th
10、e Associations objectives others with relevant interests, as may be appropriatethrough sustaining memberships. The more than 7000 to the subject in hand. It normally is a standardcommittee volunteers and the 2000 sustaining which is capable of making a significant and timelymemberships together form
11、 CSAs total membership contribution to the national interest.from which its Directors are chosen. Sustaining Approval of a standard as a National Standard ofmemberships represent a major source of income for Canada indicates that a standard conforms to theCSAs standards development activities. crite
12、ria and procedures established by the StandardsThe Association offers certification and testing services Council of Canada. Approval does not refer to thein support of and as an extension to its standards technical content of the standard; this remains thedevelopment activities. To ensure the integr
13、ity of its continuing responsibility of the accreditedcertification process, the Association regularly and standards-development organization.continually audits and inspects products that bear the Those who have a need to apply standards areCSA Mark. encouraged to use National Standards of CanadaIn
14、addition to its head office and laboratory complex in whenever practicable. These standards are subject Toronto, CSA has regional branch offices in major to periodic review; therefore, users are cautioned centres across Canada and inspection and testing to obtain the latest edition from the organiza
15、tionagencies in eight countries. Since 1919, the Association preparing the standard.has developed the necessary expertise to meet its The responsibility for approving National Standards corporate mission: CSA is an independent service of Canada rests with theorganization whose mission is to provide
16、an open and Standards Council of Canadaeffective forum for activities facilitating the exchange of 270 Albert Street, Suite 200goods and services through the use of standards, Ottawa, Ontario, K1P 6N7certification and related services to meet national and Canadainternational needs.For further inform
17、ation on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitabili
18、ty for their particular purpose.Registered trade-mark of Canadian Standards AssociationInformation technology Telecommunications and informationexchange between systems Private Integrated ServicesNetwork Inter-exchange signalling protocol CAN/CSA-ISO/IEC 15052:04 Recall supplementary serviceJanuary
19、2004 CSA/1CAN/CSA-ISO/IEC 15052:04Information technology Telecommunications andinformation exchange betweensystems Private IntegratedServices Network Inter-exchangesignalling protocol Recallsupplementary serviceCSA PrefaceStandards development within the Information Technology sector is harmonized w
20、ith internationalstandards development. Through the CSA Technical Committee on Information Technology (TCIT),Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO mem
21、berbody for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of theInternational Telecommunication Union (ITU), Canada participates in the International Telegraph andTelephone Consultative Committee (ITU-T).This Standard supersedes CAN/CSA-ISO/IEC 15052-01 (adoptio
22、n of ISO/IEC 15052:1997).This International Standard was reviewed by the CSA TCIT under the jurisdiction of the StrategicSteering Committee on Information Technology and deemed acceptable for use in Canada. (Acommittee membership list is available on request from the CSA Project Manager.) From time
23、to time,ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will review these documents for approvaland publication. For a listing, refer to the CSA Information Products catalogue or CSA Info Update orcontact a CSA Sales representative. This Standard has been formally approved, without modifi
24、cation, by the Technical Committee and has been approved as a National Standard of Canada by the StandardsCouncil of CanadaJanuary 2004 Canadian Standards Association 2004All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission ofthe publ
25、isher. ISO/IEC material is reprinted with permission. Where the words “this International Standard” appear in thetext, they should be interpreted as “this National Standard of Canada”. Inquiries regarding this National Standard of Canada should be addressed to Canadian Standards Association 5060 Spe
26、ctrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 1-800-463-6727 416-747-4044www.csa.caReference numberISO/IEC 15052:2003(E)ISO/IEC 2003INTERNATIONAL STANDARD ISO/IEC15052Second edition2003-04-01Information technology Telecommunications and information exchange between systems Private Integ
27、rated Services Network Inter-exchange signalling protocol Recall supplementary service Technologies de linformation Tlcommunications et change dinformation entre systmes Rseau priv intgration de services Protocole de signalisation dinterchange Service supplmentaire de rappel ISO/IEC 15052:2003(E) PD
28、F disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, pa
29、rties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relativ
30、e to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC
31、2003 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the c
32、ountry of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2003 All rights reservedISO/IEC 15052:2003(E) ISO/IEC 2003 All rights reserved iiiContentsForeword vIntroduction vi1 Scope 1
33、2 Conformance 13 Normative references 14 Terms and definitions 24.1 External definitions 24.2 Other definitions 34.2.1 Served user, User A 34.2.2 Served User PINX 35 List of acronyms 36 Signalling protocol for the support of SS-RE 36.1 SS-RE description 36.2 SS-RE operational requirements 36.2.1 Pro
34、vision/withdrawal 36.2.2 Requirements on the Primary PINX 36.2.3 Requirements on the Served User PINX 36.3 SS-RE coding requirements 46.3.1 Operations 46.3.2 Information elements 56.3.3 Messages 56.4 SS-RE State definitions 56.4.1 States at the Served User PINX 56.4.2 States at the Primary PINX 56.5
35、 SS-RE signalling procedures 56.5.1 Actions at the Served User PINX 56.5.2 Actions at the Primary PINX 66.6 SS-RE Impact of interworking with public ISDNs 66.7 SS-RE Impact of interworking with non-ISDNs 66.8 SS-RE Parameter values (Timers) 66.9 Protocol interactions between SS-RE and other suppleme
36、ntary services and ANFs 66.9.1 Interaction with Calling Name Identification Presentation (SS-CNIP) 66.9.2 Interaction with Connected Name Identification Presentation (SS-CONP) 66.9.3 Interaction with Call Forwarding Unconditional (SS-CFU) 76.9.4 Interaction with Call Forwarding Busy (SS-CFB) 76.9.5
37、Interaction with Call Forwarding No Reply (SS-CFNR) 76.9.6 Interaction with Call Transfer (SS-CT) 76.9.7 Interaction with Path Replacement (ANF-PR) 76.9.8 Interaction with Call Completion to Busy Subscriber (SS-CCBS) 76.9.9 Interaction with Call Completion on No Reply (SS-CCNR) 76.9.10 Interaction w
38、ith Call Offer (SS-CO) 76.9.11 Interaction with Do Not Disturb (SS-DND) 7ISO/IEC 15052:2003(E)iv ISO/IEC 2003 All rights reserved6.9.12 Interaction with Do Not Disturb Override (SS-DNDO) 76.9.13 Interaction with Call Intrusion (SS-CI) 76.9.14 Interaction with Advice of Charge (SS-AOC) 86.9.15 Intera
39、ctions with Call Interception delayed (ANF-CINT) 8AnnexesA - Protocol Implementation Conformance Statement (PICS) proforma 9B - Example of message sequences 14C - Specification and Description Language (SDL) Representation of procedures 16D - ASN.1 definitions according to ITU-T Recs. X.208 / X.209
40、19ISO/IEC 15052:2003(E) ISO/IEC 2003 All rights reserved vForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in
41、the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-
42、governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main t
43、ask of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting
44、a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 15052 was prepared by ECMA (as ECMA-214) and was adopted, under a special “fa
45、st-track procedure”, by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. This second edition cancels and replaces the first edition (ISO/IEC 15052:1997), which has been technically revised. ISO/IEC 15052:2003(E)vi ISO/I
46、EC 2003 All rights reservedIntroductionThis International Standard is one of a series of Standards defining services and signalling protocols applicable to PrivateIntegrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the frameworkof International S
47、tandards for Open Systems Interconnection as defined by ISO/IEC.This International Standard specifies the signalling protocol for use at the Q reference point in support of the Recallsupplementary service. The protocol defined in this International Standard forms part of the PSS1 protocol (informall
48、y knownas QSIG).This International Standard is based upon the practical experience of ECMA member companies and the results of their activeand continuous participation in the work of ISO/IEC JTC 1, ITU-T, ETSI and other international and national standardizationbodies. It represents a pragmatic and
49、widely based consensus. ISO/IEC 2003 All rights reserved 11ScopeThis International Standard specifies the signalling protocol for the support of Recall supplementary service (SS-RE) at the Qreference point between Private Integrated services Network eXchanges (PINXs) connected together within Private IntegratedServices Network (PISN).SS-RE is a supplementary service which provides for the re-direction of a transferred call back to the served user if the ca
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1