CAN CSA-ISO IEC 15773-2001 Information technology - Telecommunications and information exchange between systems - Broadband Private Integrated Services Network - Inter-exchange sigt.pdf

1、National Standard of CanadaCAN/CSA-ISO/IEC 15773-01(ISO/IEC 15773:1998)International Standard ISO/IEC 15773:1998 (first edition, 1998-07-15), has been adopted withoutmodification as CSA Standard CAN/CSA-ISO/IEC 15773-01, which has been approved as a National Standardof Canada by the Standards Counci

2、l of Canada.ISBN 1-55324-363-3 March 2001G35G48G49G48G55G48G51G46G48 G51G58G50G45G48G55G2cG36G32G12G2cG28G26 G14G18G1aG1aG16G1dG14G1cG1cG1bGbG28GcThe Canadian Standards Association, which The Standards Council of Canada is theoperates under the name CSA International coordinating body of the Nationa

3、l Standards system, (CSA), under whose auspices this National Standard a federation of independent, autonomoushas been produced, was chartered in 1919 and organizations working towards the furtheraccredited by the Standards Council of Canada to the development and improvement of voluntaryNational St

4、andards system in 1973. It is a not-for-profit, standardization in the national interest.nonstatutory, voluntary membership association The principal objects of the Council are to foster engaged in standards development and certification and promote voluntary standardization as a means activities. o

5、f advancing the national economy, benefiting theCSA standards reflect a national consensus of health, safety, and welfare of the public, assisting producers and users including manufacturers, and protecting the consumer, facilitating domestic consumers, retailers, unions and professional and interna

6、tional trade, and furthering internationalorganizations, and governmental agencies. The cooperation in the field of standards.standards are used widely by industry and commerce A National Standard of Canada is a standard whichand often adopted by municipal, provincial, and federal has been approved

7、by the Standards Council ofgovernments in their regulations, particularly in the Canada and one which reflects a reasonablefields of health, safety, building and construction, and agreement among the views of a number of capablethe environment. individuals whose collective interests provide to theIn

8、dividuals, companies, and associations across greatest practicable extent a balance ofCanada indicate their support for CSAs standards representation of producers, users, consumers, anddevelopment by volunteering their time and skills to others with relevant interests, as may be appropriateCSA Commi

9、ttee work and supporting the Associations to the subject in hand. It normally is a standardobjectives through sustaining memberships. The more which is capable of making a significant and timelythan 7000 committee volunteers and the 2000 contribution to the national interest.sustaining memberships t

10、ogether form CSAs total Approval of a standard as a National Standard ofmembership from which its Directors are chosen. Canada indicates that a standard conforms to theSustaining memberships represent a major source of criteria and procedures established by the Standardsincome for CSAs standards dev

11、elopment activities. Council of Canada. Approval does not refer to theThe Association offers certification and testing services technical content of the standard; this remains thein support of and as an extension to its standards continuing responsibility of the accrediteddevelopment activities. To

12、ensure the integrity of its standards-development organization.certification process, the Association regularly and Those who have a need to apply standards arecontinually audits and inspects products that bear the encouraged to use National Standards of CanadaCSA Mark. whenever practicable. These s

13、tandards are subject In addition to its head office and laboratory complex to periodic review; therefore, users are cautioned in Toronto, CSA has regional branch offices in major to obtain the latest edition from the organizationcentres across Canada and inspection and testing preparing the standard

14、.agencies in eight countries. Since 1919, the Association The responsibility for approving National Standards has developed the necessary expertise to meet its of Canada rests with thecorporate mission: CSA is an independent service Standards Council of Canadaorganization whose mission is to provide

15、 an open and 270 Albert Street, Suite 200effective forum for activities facilitating the exchange of Ottawa, Ontario, K1P 6N7goods and services through the use of standards, Canadacertification and related services to meet national andinternational needs.For further information on CSA services, writ

16、e toCSA International178 Rexdale BoulevardToronto, Ontario, M9W 1R3CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-ma

17、rk of Canadian Standards AssociationInformation technology Telecommunications and information exchangebetween systems Broadband Private Integrated Services Network CAN/CSA-ISO/IEC 15773-01 Inter-exchange signalling protocol Transit counter additional network featureMarch 2001 CSA/1CAN/CSA-ISO/IEC 15

18、773-01Information technology Telecommunications andinformation exchange betweensystems Broadband PrivateIntegrated Services Network Inter-exchange signalling protocol Transit counter additional networkfeatureCSA PrefaceStandards development within the Information Technology sector is harmonized with

19、 internationalstandards development. Through the CSA Technical Committee on Information Technology (TCIT),Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 onInformation Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO memberb

20、ody for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of theInternational Telecommunication Union (ITU), Canada participates in the International Telegraph andTelephone Consultative Committee (ITU-T). This International Standard was reviewed by the CSA TCIT unde

21、r the jurisdiction of the StrategicSteering Committee on Information Technology and deemed acceptable for use in Canada. (Acommittee membership list is available on request from the CSA Project Manager.) From time to time,ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will review these d

22、ocuments for approvaland publication. For a listing, refer to the CSA Information Products catalogue or CSA Info Update orcontact a CSA Sales representative. This Standard has been formally approved, without modification, bythese Committees and has been approved as a National Standard of Canada by t

23、he Standards Council ofCanada.March 2001 CSA International 2001All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permissionof the publisher. ISO/IEC material is reprinted with permission. Inquiries regarding this National Standard of Canadash

24、ould be addressed to CSA International, 178 Rexdale Boulevard, Toronto, Ontario, M9W 1R3.B CReference numberISO/IEC 15773:1998(E)INTERNATIONALSTANDARDISO/IEC15773First edition1998-07-15Information technology Telecommunications and informationexchange between systems BroadbandPrivate Integrated Servi

25、ces Network Inter-exchange signalling protocol Transit counter additional network featureTechnologies de linformation Tlcommunications et changedinformation entre systmes Rseau priv large bande intgrationde services Protocole de signalisation dchange Caractristique derseau additionnelle de compteur

26、de transitISO/IEC 15773:1998(E) ISO/IEC 1998All rights reserved. Unless otherwise specified, no part of this publication may be reproduced orutilized in any form or by any means, electronic or mechanical, including photocopying and microfilm,without permission in writing from the publisher.ISO/IEC C

27、opyright Office Case postale 56 CH-1211 Genve 20 SwitzerlandiiContentsForeword iiiIntroduction iv1 Scope 12 Conformance 13 Normative references 14 Definitions 24.1 External definitions 25 List of acronyms 26 Signalling protocol for the support of ANF-TC 26.1 ANF-TC description 26.2 ANF-TC operationa

28、l requirements 36.2.1 Requirements on the Originating PINX 36.2.2 Requirements on the Terminating PINX 36.2.3 Requirements on a Transit PINX 36.3 ANF-TC coding requirements 36.3.1 Transit counter information element 36.3.2 Messages 46.4 ANF-TC signalling procedures 46.4.1 Actions at the Originating

29、PINX 46.4.2 Actions at the Terminating PINX 46.4.3 Actions at a Transit PINX 46.4.4 At an Incoming Gateway PINX 46.4.5 At an Outgoing Gateway PINX 4Annex A - Protocol Implementation Conformance Statement (PICS) proforma 5Annex B - Guidelines for interworking with ATM Forum PNNI 1.0 9 ISO/IEC ISO/IEC

30、 15773:1998(E)iiiForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form thespecialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in thedevelopment of International Standards

31、through technical committees established by the respective organization to deal withparticular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Otherinternational organizations, governmental and non-governmental, in liaison with ISO and IEC, al

32、so take part in the work.In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. DraftInternational Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as anInternational Standard requir

33、es approval by at least 75 % of the national bodies casting a vote.International Standard ISO/IEC 15773 was prepared by ECMA (as ECMA-252) and was adopted, under a special “fast-trackprocedure”, by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by nati

34、onalbodies of ISO and IEC.Annex A forms an integral part of this International Standard. Annex B is for information only.ISO/IEC 15773:1998(E) ISO/IECivIntroductionThis International Standard is one of a series of standards defining services and signalling protocols applicable to BroadbandPrivate In

35、tegrated Services Networks. The series uses the B-ISDN concepts as developed by ITU-T and is also within theframework of standards for open systems interconnection as defined by ISO.This International Standard specifies the signalling protocol for use at the Q reference point in support of the Trans

36、it Counteradditional network feature.This International Standard is based upon the practical experience of ECMA member companies and the results of their activeand continuous participation in the work of ISO/IEC JTC 1, ITU-T, ETSI and other international and national standardizationbodies. It repres

37、ents a pragmatic and widely based consensus.INTERNATIONAL STANDARD ISO/IEC ISO/IEC 15773:1998(E)Information technology Telecommunications and information exchange betweensystems Broadband Private Integrated Services Network Inter-exchangesignalling protocol Transit counter additional network feature

38、11 ScopeThis International Standard specifies the signalling protocol for the support of the Transit Counter additional network feature(ANF-TC) at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected togetherwithin a Broadband Private Integrated Services Netw

39、ork (B-PISN).ANF-TC is a feature that limits the number of Transit PINXs that a call/connection setup request may be routed through e.g.,to protect the network against indefinite looping.The Q reference point is defined in ISO/IEC 11579-1.Service specifications are produced in three stages and accor

40、ding to the method specified in CCITT Rec. I.130. ThisInternational Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified bythe stage 1 and stage 2 specifications in ISO/IEC 15055.The signalling protocol for ANF-TC operates in association wit

41、h the signalling protocols for basic call/connection control (asspecified in ISO/IEC 13247) and call independent (connection oriented) signalling connections (as specified in ECMA-254).This International Standard is applicable to PINXs that can interconnect to form a PISN.2 ConformanceIn order to co

42、nform to this International Standard, a PINX shall satisfy the requirements identified in the ProtocolImplementation Conformance Statement (PICS) proforma in annex A.3 Normative referencesThe following standards contain provisions which, through reference in this text, constitute provisions of this

43、InternationalStandard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties toagreements based on this International Standard are encouraged to investigate the possibility of applying the most recenteditions of the standards indicated belo

44、w. Members of IEC and ISO maintain registers of currently valid InternationalStandards.ISO/IEC 11579-1:1994, Information technology - Telecommunications and information exchange between systems - PrivateIntegrated Services Network - Part 1: Reference configuration for PISN Exchanges (PINX).ISO/IEC 1

45、3247:1997, Information technology - Telecommunications and information exchange between systems -Broadband Private Integrated Services Network - Inter-exchange signalling protocol - Basiccall/connection control.ISO/IEC 15055:1997, Information technology - Telecommunications and information exchange

46、between systems - PrivateIntegrated Services Network - Specification, functional model and information flows - Transitcounter additional network feature.ECMA-254:1996, Broadband Private Integrated Services Network (B-PISN) - Inter-Exchange Signalling Protocol -Generic Functional Protocol.CCITT Rec.

47、I.112:1988, Vocabulary of terms for ISDNs.CCITT Rec. I.130:1988, Method for the characterization of telecommunication services supported by an ISDN and networkcapabilities of an ISDN.CCITT Rec. I.210:1988, Principles of telecommunication services supported by an ISDN and the means to describe them.I

48、SO/IEC 15773:1998(E) ISO/IEC24 DefinitionsFor the purposes of this International Standard, the following definitions apply.4.1 External definitionsThis International Standard uses the following terms defined in other documents:- Basic Service (CCITT Rec. I.210)- Call, Basic Call (ECMA-254)- Call Ind

49、ependent Signalling Connection (ECMA-254)- Incoming Gateway PINX (ISO/IEC 13247)- Incoming Side (ISO/IEC 13247)- Inter-PTNX Link (ISO/IEC 13247)- Originating PINX (ISO/IEC 13247)- Outgoing Gateway PINX (ISO/IEC 13247)- Outgoing Side (ISO/IEC 13247)- Preceding PINX (ISO/IEC 13247)- Private Integrated Services Network (PISN) (ISO/IEC 11579-1)- Private Integrated Services Network Exchange (PINX) (ISO/IEC 11579-1)- Signalling (CCITT Rec. I.112)- Subsequent PINX (ISO/IEC 13247)- Supplementary Service (CCITT Rec. I