CAN CSA-ISO IEC 17877-2004 Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification functional model anda.pdf

1、Reference numberISO/IEC 17877:2000(E)ISO/IEC 2000Information technology Telecommunications and informationexchange between systems PrivateIntegrated Services Network Specification, functional model andinformation flows Private User Mobility(PUM) Call handling additional networkfeaturesTechnologies d

2、e linformation Tlcommunications et changedinformation entre systmes Rseau priv intgration deservices Spcifications, modle fonctionnel et flux dinformations Mobilit de lusager priv (PUM) Caractristiques additionnelles derseau de traitement dappelNational Standard of CanadaCAN/CSA-ISO/IEC 17877:04(ISO

3、/IEC 17877:2000)International Standard ISO/IEC 17877:2000 (first edition, 2000-04-15) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 17877:04, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 1-55397-711-4 December 2004The Ca

4、nadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in stand

5、ards development and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted b

6、y municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time

7、 and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major s

8、ource of income for CSAs standards development activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and i

9、nspects products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet

10、its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.For furth

11、er information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the fu

12、rther development and improvement of voluntary standardization in the national interest. The principal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and prot

13、ecting the consumer, facilitating domestic and international trade, and furthering international cooperation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views

14、 of a number of capable individuals whose collective interests provide to the greatest practicable extent a balance of representation of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making

15、 a significant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard;

16、 this remains the continuing responsibility of the accredited standards development organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain

17、 the latest edition from the organization preparing the standard.The responsibility for approving National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in it

18、s Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationDecember 2004 Canadian Standards Association CSA/1CAN/CSA-ISO/IEC 17877:04Information technology Telecommunicat

19、ions and informationexchange between systems Private Integrated Services Network Specification, functional model and information flows Private UserMobility (PUM) Call handling additional network featuresCAN/CSA-ISO/IEC 17877:04Information technology Telecommunications and information exchange betwee

20、n systems Private Integrated Services Network Specification, functional model and information flows Private User Mobility (PUM) Call handling additional network featuresCSA PrefaceStandards development within the Information Technology sector is harmonized with international standards development. T

21、hrough the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada and sponsor of the C

22、anadian National Committee of the IEC. Also, as a member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee (ITU-T).This International Standard was reviewed by the CSA TCIT under the jurisdiction of the Strategi

23、c Steering Committee on Information Technology and deemed acceptable for use in Canada. (A committee membership list is available on request from the CSA Project Manager.) From time to time, ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will review these documents for approval and publi

24、cation. For a listing, refer to the CSA Information Products catalogue or CSA Info Update or contact a CSA Sales representative. This Standard has been formally approved as a National Standard of Canada by the Standards Council of Canada.December 2004 Canadian Standards Association 2004All rights re

25、served. No part of this publication may be reproduced in any form whatsoever without the prior permission ofthe publisher. ISO/IEC material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Canada”

26、.Inquiries regarding this National Standard of Canada should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044www.csa.caReference numberISO/IEC 17877:2000(E)ISO/IEC 2000INTERNATIONALSTANDARDISO/IEC17877First edi

27、tion2000-04-15Information technology Telecommunications and informationexchange between systems PrivateIntegrated Services Network Specification, functional model andinformation flows Private User Mobility(PUM) Call handling additional networkfeaturesTechnologies de linformation Tlcommunications et

28、changedinformation entre systmes Rseau priv intgration deservices Spcifications, modle fonctionnel et flux dinformations Mobilit de lusager priv (PUM) Caractristiques additionnelles derseau de traitement dappelISO/IEC 17877:2000(E)PDF disclaimerThis PDF file may contain embedded typefaces. In accord

29、ance with Adobes licensing policy, this file may be printed or viewed but shall notbe edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading thisfile, parties accept therein the responsibility of not infringing Adobes licen

30、sing policy. The ISO Central Secretariat accepts no liability in thisarea.Adobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameterswere optimized for printing. Ev

31、ery care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely eventthat a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2000All rights reserved. Unless otherwise specified, no part of this public

32、ation may be reproduced or utilized in any form or by any means, electronicor mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member bodyin the country of the requester.ISO copyright officeCase postale 56 Gb7 CH-1211 Geneva

33、 20Tel. + 41 22 749 01 11Fax + 41 22 734 10 79E-mail copyrightiso.chWeb www.iso.chii ISO/IEC 2000 All rights reservedISO/IEC 17877:2000(E) ISO/IEC 2000 All rights reserved iiiContentsForeword viIntroduction vii1 Scope 12 Conformance 13 Normative references 14 Definitions 24.1 External definitions 24

34、.2 Additional network feature (ANF) 34.3 Alternative identifier 34.4 Destination number 34.5 Home Data Base (HDB) 34.6 Home PINX 34.7 Hosting address 34.8 Incoming PUM call 34.9 Originating number 34.10 Outgoing PUM call 34.11 Private User Mobility (PUM) 34.12 PUM registration 34.13 PUM user 34.14 P

35、UM user identity 34.15 Visitor Data Base (VDB) 34.16 Visitor PINX 35 List of acronyms 36 ANF-PUMI stage 1 specification 46.1 Description 46.1.1 General description 46.1.2 Qualifications on applicability to telecommunication services 56.2 Procedure 56.2.1 Provision/withdrawal 56.2.2 Normal procedures

36、 56.2.3 Exceptional procedures 56.3 Interaction with other supplementary services and ANFs 56.3.1 Number identification services (SS-CLIP, SS-COLP, SS-CLIR) 56.3.2 Calling Name Identification Presentation (SS-CNIP) 56.3.3 Connected Name Identification Presentation (SS-CONP) 56.3.4 Calling/Connected

37、Name Identification Restriction (SS-CNIR) 56.3.5 Call Completion to Busy Subscriber (SS-CCBS) 56.3.6 Call Completion on No Reply (SS-CCNR) 56.3.7 Call Transfer (SS-CT) 56.3.8 Call Forwarding Unconditional (SS-CFU) 56.3.9 Call Forwarding Busy (SS-CFB) 66.3.10 Call Forwarding No Reply (SS-CFNR) 66.3.1

38、1 Call Deflection (SS-CD) 66.3.12 Path Replacement (ANF-PR) 66.3.13 Call Offer (SS-CO) 66.3.14 Call Intrusion (SS-CI) 66.3.15 Do not Disturb (SS-DND) 6ISO/IEC 17877:2000(E)iv ISO/IEC 2000 All rights reserved6.3.16 Do not Disturb Override (SS-DNDO) 66.3.17 Advice of Charge (SS-AOC) 66.3.18 Recall (SS

39、-RE) 66.3.19 Call Interception (ANF-CINT) 66.3.20 Transit Counter (ANF-TC) 66.3.21 Route Restriction Class (ANF-RRC) 66.3.22 Message Waiting Indication (SS-MWI) 66.3.23 Wireless Terminal Location Registration (SS-WTLR) 66.3.24 Wireless Terminal Incoming Call (ANF-WTMI) 66.3.25 Wireless Terminal Outg

40、oing Call (ANF-WTMO) 66.3.26 Wireless Terminal Authentication of a WTM User (SS-WTAT) 66.3.27 Wireless Terminal Authentication of the PISN (SS-WTAN) 66.3.28 CommonInformation(ANF-CMN) 76.3.29 Call Priority Interruption (Protection) (SS-CPI(P) 76.3.30 Private User Mobility Registration (SS-PUMR) 76.3

41、.31 Private User Mobility Outgoing Call (ANF-PUMO) 76.4 Interworking considerations 76.5 Overall SDL 77 ANF-PUMO stage 1 specification 77.1 Description 77.1.1 General description 77.1.2 Qualifications on applicability to telecommunication services 87.2 Procedure 87.2.1 Provision/withdrawal 87.2.2 No

42、rmal procedures 87.2.3 Exceptional procedures 87.3 Interaction with other supplementary services and ANFs 87.3.1 Number identification services (SS-CLIP, SS-COLP, SS-CLIR) 87.3.2 Calling Name Identification Presentation (SS-CNIP) 87.3.3 Connected Name Identification Presentation (SS-CONP) 87.3.4 Cal

43、ling/Connected Name Identification Restriction (SS-CNIR) 87.3.5 Call Completion to Busy Subscriber (SS-CCBS) 87.3.6 Call Completion on No Reply (SS-CCNR) 87.3.7 Call Transfer (SS-CT) 87.3.8 Call Forwarding Unconditional (SS-CFU) 87.3.9 Call Forwarding Busy (SS-CFB) 87.3.10 Call Forwarding No Reply (

44、SS-CFNR) 97.3.11 Call Deflection (SS-CD) 97.3.12 Path Replacement (ANF-PR) 97.3.13 Call Offer (SS-CO) 97.3.14 Call Intrusion (SS-CI) 97.3.15 Do not Disturb (SS-DND) 97.3.16 Do not Disturb Override (SS-DNDO) 97.3.17 Advice of Charge (SS-AOC) 97.3.18 Recall (SS-RE) 97.3.19 Call Interception (ANF-CINT)

45、 97.3.20 Transit Counter (ANF-TC) 97.3.21 Route Restriction Class (ANF-RRC) 97.3.22 Message Waiting Indication (SS-MWI) 97.3.23 Wireless Terminal Location Registration (SS-WTLR) 97.3.24 Wireless Terminal Incoming Call (ANF-WTMI) 97.3.25 Wireless Terminal Outgoing Call (ANF-WTMO) 97.3.26 Wireless Ter

46、minal Authentication of a WTM User (SS-WTAT) 97.3.27 Wireless Terminal Authentication of the PISN (SS-WTAN) 97.3.28 CommonInformation(ANF-CMN) 97.3.29 Call Priority Interruption (Protection) (SS-CPI(P) 9ISO/IEC 17877:2000(E) ISO/IEC 2000 All rights reserved v7.3.30 Private User Mobility Registration

47、 (SS-PUMR) 107.3.31 Private User Mobility Incoming Call (ANF-PUMI) 107.4 Interworking considerations 107.5 Overall SDL 108 ANF-PUMI stage 2 specification 108.1 Functional model 108.1.1 Functional model description 108.1.2 Description of Functional Entities 118.1.3 Relationship of functional model to

48、 basic call functional model 118.2 Information flows 128.2.1 Definition of information flows 128.2.2 Relationship of information flows to basic call information flows 148.2.3 Information flow sequences 148.3 Functional Entity actions 198.3.1 Actions of FE1 198.3.2 Actions of FE2 198.3.3 Actions of F

49、E3 208.3.4 Actions of FE4 208.3.5 Actions of FE5 208.4 Functional entity behaviour 208.4.1 Behaviour of FE1 218.4.2 Behaviour of FE2 228.4.3 Behaviour of FE3 238.4.4 Behaviour of FE4 248.4.5 Behaviour of FE5 258.5 Allocation of Functional Entities to physical equipment 268.6 Interworking considerations 269 ANF-PUMO stage 2 specification 269.1 Functional model 269.1.1 Functional model description 269.1.2 Description of Functional Entities 279.1.3 Relationship of functi