CAN CSA-ISO IEC 18004-2007 Information technology - Automatic identification and data capture techniques - QR Code 2005 bar code symbology specification (Technical Corrigendum 1 Ja.pdf

1、 Reference numberISO/IEC 18004:2006(E)ISO/IEC 2006Information technology Automatic identification and data capture techniques QR Code 2005 bar code symbology specification Technologies de linformation Techniques didentification automatique et de capture des donnes Spcification de la symbologie de co

2、de barres QR Code 2005 International Organization for Standardization (ISO), 2006. All rights reserved. International Electrotechnical Commission (IEC ), 2006. All rights reserved. NOT FOR RESALE. National Standard of CanadaCAN/CSA-ISO/IEC 18004:07(ISO/IEC 18004:2006)International Standard ISO/IEC 1

3、8004:2006 (second edition, 2006-09-01) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 18004:07, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 978-1-55436-644-6 November 2007Legal Notice for StandardsCanadian Standards Asso

4、ciation (CSA) standards are developed through a consensus standards development process approved by theStandards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA administers the process an

5、d establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including

6、, withoutlimitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or itsnon-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of anyof the information

7、 published in this document. CSA makes no representations or warranties regarding this documents compliance withany applicable statute, rule, or regulation.IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR

8、ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES,HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESSINTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT,TORT (INCLUDING

9、 NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO ORPOSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS,COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking t

10、o render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document isdirected to those who have the appropriate degree of experience to use and apply its contents, and CSA a

11、ccepts no responsibilitywhatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does itundertake, to enforce compliance with

12、 the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyr

13、ight, all trade-marks (except as otherwise noted to the contrary), andall inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protectedby patents and applications for patents. Without limitation, the unauthorized use, modification

14、, copying, or disclosure of this documentmay violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all in

15、tellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be heldresponsible for identifying any or all such patent rights. Users of this standard are expressly advised t

16、hat determination of the validity ofany such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in

17、electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have suchcopies, and only if this

18、Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree wit

19、h any of the terms and conditions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of thisdocument constitutes your acceptance of the terms and conditions

20、of this Legal Notice.The Canadian Standards Association (CSA),under whose auspices this National Standard hasbeen produced, was chartered in 1919 andaccredited by the Standards Council of Canadato the National Standards system in 1973. It is anot-for-profit, nonstatutory, voluntary membershipassocia

21、tion engaged in standards development andcertification activities.CSA standards reflect a national consensus ofproducers and users including manufacturers,consumers, retailers, unions and professionalorganizations, and governmental agencies. Thestandards are used widely by industry and commerceand o

22、ften adopted by municipal, provincial, andfederal governments in their regulations, particularlyin the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associations acrossCanada indicate their support for CSAs standardsdevelopment by volunteering th

23、eir time and skillsto CSA Committee work and supporting theAssociations objectives through sustainingmemberships. The more than 7000 committeevolunteers and the 2000 sustaining membershipstogether form CSAs total membership from whichits Directors are chosen. Sustaining membershipsrepresent a major

24、source of income for CSAsstandards development activities.The Association offers certification and testingservices in support of and as an extension to itsstandards development activities. To ensure theintegrity of its certification process, the Associationregularly and continually audits and inspec

25、ts productsthat bear the CSA Mark.In addition to its head office and laboratorycomplex in Toronto, CSA has regional branch officesin major centres across Canada and inspection andtesting agencies in eight countries. Since 1919, theAssociation has developed the necessary expertise tomeet its corporat

26、e mission: CSA is an independentservice organization whose mission is to provide anopen and effective forum for activities facilitating theexchange of goods and services through the use ofstandards, certification and related services to meetnational and international needs.For further information on

27、 CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopmen

28、t and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facil

29、itating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited StandardsDevelopment Organization (SDO) and approvedby the SCC according to the requirements of CAN-P-2.Ap

30、proval does not refer to the technical content of thestandard; this remains the continuing responsibility ofthe SDO. An NSC reflects a consensus of a number ofcapable individuals whose collective interests provide,to the greatest practicable extent, a balance ofrepresentation of general interests, p

31、roducers,regulators, users (including consumers), and otherswith relevant interests, as may be appropriate to thesubject in hand. It normally is a standard which iscapable of making a significant and timely contributionto the national interest.Those who have a need to apply standards areencouraged t

32、o use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO whichpublishes the standard.The responsibility for approving standards asNational Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200O

33、ttawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCette no

34、rme est offerte en anglais seulement pour le moment. La CSA publiera la version enfranais ds quelle sera produite par lorganisme rdacteur.Approved byStandards Council of CanadaNational Standard of CanadaPublished in November 2007 by Canadian Standards AssociationA not-for-profit private sector organ

35、ization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-ISO/IEC 18004:07Information technology Automatic identification and data capture techniques QR Code 2005 bar code symbology specificationPrepared by Int

36、ernational Organization for Standardization/ International Electrotechnical CommissionReviewed byInformation technology Automatic identification and data capture techniques QR Code 2005 bar code symbology specificationTechnical Corrigendum 1:2013 (IDT) toNational Standard of CanadaCAN/CSA-ISO/IEC 18

37、004-07(ISO/IEC 18004:2006, IDT)NOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.Standards Update ServiceTechnical Corrigendum 1:2013 toCAN/CSA-ISO/IEC 18004-07January 2013Title: Information technology Automatic identification and data capture techniques QR Code 2005 bar code symbology specificat

38、ionPagination: 7 pagesTo register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2418753.If you require assistance, please e-mail techsupportcsagroup.org or call 41

39、6-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.ICS 01.080.50; 35.040 Ref. No. ISO/IEC 18004:2006/Cor.1:2009(E) ISO/IEC 2009 All rights reserved INTERNATIONAL STANDARD ISO/IEC 18004:2006 TECHNICAL CORRIGENDUM 1 Published 2009-0

40、3-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONINTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION LECTROTECHNIQUE INTERNATIONALEInformation technology Automatic identification and data capture techniques QR Code 2005 bar code symbology specification

41、 TECHNICAL CORRIGENDUM 1 Technologies de linformation Techniques automatiques didentification et de capture des donnes Spcification de symbologie de code barres, code QR 2005 RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO/IEC 18004:2006 was prepared by Joint Technical Committee ISO/IEC JTC

42、1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. Page 55, 6.9.1 In the example, replace “Format information module pattern: 100000011001110” with “Format information module pattern: 100000011001110 bit 14 bit 0” Technical Corrigendum 1:2013 to CAN/

43、CSA-ISO/IEC 18004-07ISO/IEC 18004:2006/Cor.1:2009(E) 2 ISO/IEC 2009 All rights reservedPage 57, 6.9.2 In the example, replace “Format information module pattern: 100000011001110” with “Format information module pattern: 100000011001110 bit 14 bit 0” Page 58, 6.10 In the example, replace “Format info

44、rmation module pattern:” with “Version information module pattern:” Page 96, I.2 Replace Figure I.2 with the following figure: Figure I.2 Final 1-M symbol encoding 01234567 Technical Corrigendum 1:2013 to CAN/CSA-ISO/IEC 18004-07ISO/IEC 18004:2006/Cor.1:2009(E) ISO/IEC 2009 All rights reserved 3Page

45、s 101105, Annex J Replace Figures J.1 to J.6 with the following figures: Alphanumeric Num. 0 12 3 4 5 678910111213141516 17 18 19 20 21 0 2M 2L 3M 4Q 3L 4M 4L 1 1 2M 2L 3M 4Q 3L 4M 4L 2 1 2M 2L 3M 4Q 3L 4M 4L 3 1 2M 2L 3M 4Q 3L 4M 4L 4 1 2M 2L 3M 4Q 3L 4M 4L 5 1 2M 2L 3M 4Q 3L 4M 4L 6 2M 2L 3M 4Q 3L

46、 4M 4L 7 2M 2L 3M 4Q 3L 4M 4L 8 2M 3M 4Q 3L 4M 4L 9 2L 3M 4Q 3L 4M 4L 10 2L 3M 4Q 3L 4M 4L 11 3M 4Q 3L 4M 4L 12 3M 4Q 3L 4M 4L 13 3M 4Q 3L 4M 4L 14 3M 4Q 3L 4M 4L 15 3M 4Q 3L 4M 4L 16 3M 4Q 3L 4M 4L 17 3M 4Q 3L 4M 4L 18 3M/4Q3L 4M 4L 19 4Q 3L 4M 4L 20 3L/4Q4M 4L 21 3L/4Q4M 4L 22 3L 4M 4L 23 3L 4M 4L

47、 24 4M 4L 25 4M 4L 26 4M 4L 27 4M 4L 28 4M 4L 29 4M 4L 30 4M 4L 31 4L 32 4L 33 4L 34 4L 35 4L Figure J.1 Micro QR Code symbol capacities - numeric and alphanumeric data Technical Corrigendum 1:2013 to CAN/CSA-ISO/IEC 18004-07ISO/IEC 18004:2006/Cor.1:2009(E) 4 ISO/IEC 2009 All rights reservedByte Num

48、. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 3M 3L/4Q 4M 4L 1 3M 3L/4Q 4M 4L 2 3M 4Q 3L 4M 4L 3 3M 4Q 3L 4M 4L 4 3M 4Q 3L 4M 4L 5 1 3M 4Q 3L 4M 4L 6 2M 3M 4Q 3L 4M 4L 7 2M 3M 4Q 3L 4M 4L 8 2M 3M 4Q 3L 4M 4L 9 2L 3M 4Q 3L 4M 4L 10 2L 3M 4Q 3L 4M 4L 11 3M 4Q 3L 4M 4L 12 3M 4Q 3L 4M 4L 13 3M 4Q 3L 4M 4L 14 3M 4Q 3L 4M 4L 15 3M 4Q 3L 4M 4L 16 3M 4Q 3L 4M 4L 17 3M/4Q3L 4M 4L 18 3M/4Q3L 4M 4L 19 3L/4Q4M 4L 20 3L/4Q4M 4L 21 3L/4Q4M