CAN CSA-ISO IEC 8824-1-2012 Information technology - Abstract Syntax Notation One (ASN 1) Specification of basic notation (Incorporating Corrigendum No 1 January 2015 Corrigendum N.pdf

1、Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notationCAN/CSA-ISO/IEC 8824-1:12(ISO/IEC 8824-1:2008, IDT)National Standard of CanadaNOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.Legal Notice for StandardsCanadian Standards Association (CSA) standards are dev

2、eloped through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promot

3、e fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implie

4、d warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this docume

5、nt. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT,

6、OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR AN

7、Y OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professi

8、onal or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no respo

9、nsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the content

10、s of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all

11、trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copyin

12、g, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellec

13、tual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that

14、determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in el

15、ectronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such co

16、pies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.

17、If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of

18、the terms and conditions of this Legal Notice. ISO/IEC 2012. CSA Group 2015. All rights reserved. Unauthorized reproduction is strictly prohibited.Technical Corrigendum1:2015(IDT) toCAN/CSA-ISO/IEC 8824-1:12(ISO/IEC 8824-1:2008, IDT)National Standard of CanadaTechnical Corrigendum1:2015(IDT) to CAN/

19、CSA-ISO/IEC 8824-1:12Informationtechnology Abstract Syntax NotationOne (ASN.1):Specificationof basic notation(ISO/IEC 8824-1:2008, IDT)Standards UpdateServiceTechnical Corrigendum 1:2015 (IDT) toCAN/CSA-ISO/IEC 8824-1:12January 2015Title: Information technology Abstract Syntax Notation One (ASN.1):

20、Specification of basicnotationTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2421526.If you require assistance, please e-mail techsupportcsagroup.org

21、or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legalto find out how we protect your personalinformation.INTERNATIONAL STANDARD ISO/IEC 8824-1:2008TECHNICAL CORRIGENDUM 1 Published 2012-12-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMAL

22、ISATIONINTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION LECTROTECHNIQUE INTERNATIONALEInformation technology Abstract Syntax Notation One (ASN.1): Specification of basic notation TECHNICAL CORRIGENDUM 1 Technologies de linformation Notation de syntaxe abstraite numro un (ASN.1): Spcification de

23、la notation de base RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO/IEC 8824-1:2008 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications and information exchange between systems, in collaboration with ITU-T. The identical text

24、 is published as Rec. ITU-T X.680 (2008)/Cor.1 (10/2011). ICS 35.100.60 Ref. No. ISO/IEC 8824-1:2008/Cor.1:2012(E) ISO/IEC 2012 All rights reserved ISO/IEC 8824-1:2008/Cor.1:2012 (E) Rec. ITU-T X.680 (2008)/Cor.1 (10/2011) 1 INTERNATIONAL STANDARD RECOMMENDATION ITU-T Information technology Abstract

25、 Syntax Notation One (ASN.1): Specification of basic notation Technical Corrigendum 1 Conventions used in this corrigendum: Original, unchanged, text is in normal font. Deleted text is struck-through, thus: deleted text. Inserted text is underlined, thus: inserted text. 1 Clause 2 Add a new NOTE to

26、the first paragraph as follows: NOTE This Recommendation | International Standard is based on ISO/IEC 10646:2003 and the Unicode standard version 3.2.0:2002. It cannot be applied using later versions of these two standards. 2 Clause 12.27 Replace the first sentence of the lexical item definition wit

27、h: This lexical item shall consist of an arbitrarily long sequence of ISO/IEC 10646 characters that satisfies the constraints specified in Rec. ITU-T X.660 | ISO 9834-1, 7.2.5 and identifies and arc of the International Object Identifier tree. 3 Clause 42.1 Add a new NOTE to the first paragraph as f

28、ollows: NOTE This Recommendation | International Standard is based on ISO/IEC 10646:2003. It cannot be applied using later versions of this standard. The specification of the means by which the “ASN1-CHARACTER-MODULE“ is defined can only be applied with ISO/IEC 10646:2003. 4 Clause 46 Rename the cur

29、rent NOTE as NOTE 1 and add the following new NOTE 2: NOTE 2 The time type (see clause 38) gives more flexibility and should be preferred. 5 Clause C.3.2.2 Replace the text of the last paragraph of (h) with: If “TagDefault“ is AUTOMATIC TAGS, the decision on whether to apply automatic tagging is tak

30、en according to 29.5 (the automatic tagging will be performed later on). If “ExtensionDefault“ is EXTENSIBILITY IMPLIED, an ellipsis (“.“) is added after the “AlternativeTypeLists“ if it is not present. Technical Corrigendum 1:2015 (IDT) to CAN/CSA-ISO/IEC 8824-1:12 Copyright NoticeThe Canadian adop

31、g415 on of this Amendment to the Internag415 onal Standard contains informag415 on copyright protected by CSA Group. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of CSA Group. ISO/IEC material is reprinted with permissio

32、n.Requests for permission to reproduce this adopted Amendment or parts thereof should be addressed to:Manager, SalesCSA Group5060 Spectrum Way, Suite 100Mississauga, Ontario L4W 5N6Copyright violators will be prosecuted to the full extent of the law.CSA Standards Update ServiceCAN/CSA-ISO/IEC 8824-1

33、:12March 2012Title:Information technology Abs tract Syntax Notation One (ASN.1): Specification of basic notationPagination:195 pages (CSA/1CSA/4, ixi preliminary, and 180 text)To register for e-mail notification about any updates to this publicationgo to www.Shop.CSA.caclick on E-mail Services under

34、 MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2421526.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your

35、 personal information.The Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership

36、association engaged in standards development and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and

37、commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards developmen

38、t by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining mem

39、berships represent a major source of income for CSAs standards development activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly

40、and continually audits and inspects products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the

41、necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and i

42、nternational needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent, autonomousorgani

43、zations working towards the furtherdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and welfare of the public

44、, assistingand protecting the consumer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the

45、SCC according to the requirements of CAN-P-2. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent

46、, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interes

47、t.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The responsibility for approving standards as National Standards of Canada rests with

48、 theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCette norme est offerte en anglais seulement pour le moment. La CSA publiera la ve