CAN CSA-M5000 1-2007 Agricultural tractors Rear-mounted power take-off types 1 2 and 3 Part 1 General specifications safety requirements dimensions for master shield and clearanc.pdf

1、 Reference numberISO 500-1:2004(E)ISO 2004Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone Tracteurs agricoles Prises de force montes larrire des types 1, 2 et 3 Partie 1: Spcificat

2、ions gnrales, exigences de scurit, dimensions du bouclier protecteur et de la zone de dgagement International Organization for Standardization (ISO), 2004. All rights reserved. NOT FOR RESALE. National Standard of CanadaCAN/CSA-M5000.1-07(ISO 500-1:2004)International Standard ISO 500-1:2004 (first e

3、dition, 2004-02-01) has been adopted without modification(IDT) as CSA Standard CAN/CSA-M5000.1-07, which has been approved as a National Standard of Canada bythe Standards Council of Canada.ISBN 978-1-55436-493-0 April 2007Legal Notice for StandardsCanadian Standards Association (CSA) standards are

4、developed through a consensus standards development process approved by theStandards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA administers the process and establishes rules to promo

5、te fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, withoutlimitation, implied

6、 warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or itsnon-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of anyof the information published in this document.

7、 CSA makes no representations or warranties regarding this documents compliance withany applicable statute, rule, or regulation.IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INC

8、IDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES,HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESSINTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHER T

9、HEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO ORPOSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS,COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or oth

10、er services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document isdirected to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibilitywhat

11、soever arising in any way from any and all use of or reliance on the information contained in this document.CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does itundertake, to enforce compliance with the contents of the standar

12、ds or other documents it publishes.Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (excep

13、t as otherwise noted to the contrary), andall inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protectedby patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of

14、this documentmay violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectualproperty rights in

15、 this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be heldresponsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the val

16、idity ofany such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form:.load this d

17、ocument onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have suchcopies, and only if this Legal Notice appears on each

18、 such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and condi

19、tions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of thisdocument constitutes your acceptance of the terms and conditions of this Legal Notice.The Can

20、adian Standards Association (CSA),under whose auspices this National Standard hasbeen produced, was chartered in 1919 andaccredited by the Standards Council of Canadato the National Standards system in 1973. It is anot-for-profit, nonstatutory, voluntary membershipassociation engaged in standards de

21、velopment andcertification activities.CSA standards reflect a national consensus ofproducers and users including manufacturers,consumers, retailers, unions and professionalorganizations, and governmental agencies. Thestandards are used widely by industry and commerceand often adopted by municipal, p

22、rovincial, andfederal governments in their regulations, particularlyin the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associations acrossCanada indicate their support for CSAs standardsdevelopment by volunteering their time and skillsto CSA Co

23、mmittee work and supporting theAssociations objectives through sustainingmemberships. The more than 7000 committeevolunteers and the 2000 sustaining membershipstogether form CSAs total membership from whichits Directors are chosen. Sustaining membershipsrepresent a major source of income for CSAssta

24、ndards development activities.The Association offers certification and testingservices in support of and as an extension to itsstandards development activities. To ensure theintegrity of its certification process, the Associationregularly and continually audits and inspects productsthat bear the CSA

25、 Mark.In addition to its head office and laboratorycomplex in Toronto, CSA has regional branch officesin major centres across Canada and inspection andtesting agencies in eight countries. Since 1919, theAssociation has developed the necessary expertise tomeet its corporate mission: CSA is an indepen

26、dentservice organization whose mission is to provide anopen and effective forum for activities facilitating theexchange of goods and services through the use ofstandards, certification and related services to meetnational and international needs.For further information on CSA services, write toCanad

27、ian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopment and improvement of volunta

28、rystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facilitating domesticand internat

29、ional trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited StandardsDevelopment Organization (SDO) and approvedby the SCC according to the requirements of CAN-P-2.Approval does not refer to the

30、 technical content of thestandard; this remains the continuing responsibility ofthe SDO. An NSC reflects a consensus of a number ofcapable individuals whose collective interests provide,to the greatest practicable extent, a balance ofrepresentation of general interests, producers,regulators, users (

31、including consumers), and otherswith relevant interests, as may be appropriate to thesubject in hand. It normally is a standard which iscapable of making a significant and timely contributionto the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards

32、are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO whichpublishes the standard.The responsibility for approving standards asNational Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7Canad

33、aCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark

34、of Canadian Standards AssociationApproved byStandards Council of CanadaNational Standard of CanadaPublished in April 2007 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit ou

35、r Online Store at www.ShopCSA.caCAN/CSA-M5000.1-07Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 1: General specifications, safety requirements, dimensions for mastershield and clearance zoneRegistered trade-mark of Canadian Standards AssociationReviewed byPrepared byInterna

36、tional Organization for StandardizationCAN/CSA-M5000.1-07Agricultural tractors Rear-mounted power take-off types 1, 2and 3 Part 1: General specifications, safety requirements,dimensions for master shield and clearance zoneApril 2007 Canadian Standards Association CSA/3CAN/CSA-M5000.1-07Agricultural

37、tractors Rear-mounted power take-offtypes 1, 2 and 3 Part 1: General specifications, safety requirements, dimensions for master shield and clearance zoneCSA PrefaceThis is the first edition of CAN/CSA-M5000.1, Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 1: General specifi

38、cations, safety requirements, dimensions for master shield and clearance zone, which is an adoption without modification of the identically titled ISO (International Organization for Standardization) Standard 500-1 (first edition, 2004-02-01).This Standard was reviewed for Canadian adoption by the C

39、SA Technical Committee on Agricultural Machinery, under the jurisdiction of the Strategic Steering Committee on Occupational Health and Safety, and has been formally approved by the Technical Committee. This Standard has been approved as a National Standard of Canada by the Standards Council of Cana

40、da.April 2007 Canadian Standards Association 2007All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission ofthe publisher. ISO material is reprinted with permission. Where the words “this International Standard” appear in the text, they s

41、hould be interpreted as “this National Standard of Canada”.Inquiries regarding this National Standard of Canada should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000www.csa.caTo purchase CSA Standards and rel

42、ated publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.Reference numberISO 500-1:2004(E)ISO 2004INTERNATIONAL STANDARD ISO500-1First edition2004-02-01Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 1: General specificatio

43、ns, safety requirements, dimensions for master shield and clearance zone Tracteurs agricoles Prises de force montes larrire des types 1, 2 et 3 Partie 1: Spcifications gnrales, exigences de scurit, dimensions du bouclier protecteur et de la zone de dgagement ISO 500-1:2004(E) PDF disclaimer This PDF

44、 file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein

45、the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PD

46、F-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2004 All rights reserved.

47、 Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester.

48、ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO 2004 All rights reservedCAN/CSA-M5000.1-07ISO 500-1:2004(E) ISO 2004 All rights reserved iiiForeword ISO (the International Organization for Standardizat

49、ion) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotech