CAN CSA-Z150 3-2011 Safety code on articulating boom cranes (First Edition Update No 1 October 2012).pdf

1、Z150.3-11Safety code on articulating boom cranesLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints

2、 and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provid

3、ed without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual

4、property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS,

5、MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTIO

6、N, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAG

7、ES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this doc

8、ument is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publ

9、ishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or ele

10、ctronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and tra

11、de secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal red

12、ress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA

13、 shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for infor

14、mational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Lim

15、ited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal No

16、tice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, an

17、d if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Update No. 1Z150.3-11October 2012Note: For information about the Standards Update Service, go to shop.csa.ca or e-mail techsup

18、portcsagroup.org.Title: Safety code on articulating boom cranes originally published November 2011The following revisions have been formally approved. Changes to the body of the Standard are marked by the symbol delta () in the margin.Revised Outside front cover and title page, Figure 2, and Clause

19、B.5.6.4.2New National Standards of Canada text and Clause B.5.6.4.3Deleted None Update your copy by inserting these revised pages.Keep the pages you remove for reference.CAN/CSA-Z150.3-11A National Standard of Canada(approved October 2012)Safety code on articulating boom cranesLegal Notice for Stand

20、ardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a stan

21、dard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or c

22、onditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the

23、accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFI

24、LIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR AN

25、Y OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS,

26、 OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed

27、to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA Group is a private not-for-profit company that publishes

28、voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed

29、or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such invent

30、ions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or

31、others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the

32、 subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis documen

33、t is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISI

34、N0$ this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and

35、others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic

36、 review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The responsibility for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationa

37、le du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.TMA trade-mark of the Canadian Standards A

38、ssociation, operating as “CSA Group”(National Standards of Canada text inserted October 2012)Approved byStandards Council of CanadaNational Standard of Canada(approved October 2012)Published in November 2011 by CSA GroupA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Missis

39、sauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at shop.csa.caCAN/CSA-Z150.3-11Safety code on articulating boom cranesPrepared byTMA trade-mark of the Canadian Standards Association, operating as “CSA Group”ISBN 978-1-55491-722-8 2012 CSA GroupAll rights reserved. No

40、part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.(Copyright page replaced October 2012)To purchase standards and related publications, visit our Online Store at shop.csa.ca or call toll-free1-800-463-6727 or 416-747-4044.100%CSA Group pr

41、ints its publications on Rolland Enviro100, which contains 100% recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy. 2011 CSA Group Safety code on articulating boom cranesOctober 2012Figure 2Typical load rating chart(See Clause 4.2

42、.4.1.)3000 kg (6600 lb)2300 kg (5070 lb)1650 kg (3640 lb)1000 kg (2380 lb)750 kg (1700 lb)600 kg (1320 lb)(0 ft) (5 ft) (10 ft) (25 ft) (20 ft) (25 ft) (30 ft) 10.5 m (35 ft)9.0 m (30 ft)7.5 m (25 ft)6.0 m (20 ft)4.5 m (15 ft)3.0 m (10 ft)1.5 m (5 ft)0 m (0 ft)(5 ft)(10 ft)(15 ft)(20 ft)(25 ft)12.0

43、m (40 ft)180 180OutriggerdeploymentFront out and downRear down onlyCrane make and model29(Replaces p. 29, November 2011)Z150.3-11 2011 CSA GroupOctober 2012Figure 3Example of a pinned basket(See Clause 6.3.1.9.)Boom insertPlan viewSide view(Replaces p. 30, November 2011)30 2011 CSA Group Safety code

44、 on articulating boom cranesOctober 2012B.5.6.3 Periodic inspectionB.5.6.3.1 Periodic inspections shall be performed by a competent person and shall be based on such factors as(a) expected rope life as determined by experience on the particular installation or similar installations;(b) severity of e

45、nvironment; (c) percentage of capacity lifts;(d) frequency rates of operations; and(e) exposure to shock loads.Inspections need not be at equal calendar intervals and should be more frequent as the rope approaches the end of its life. This inspection shall be made at least annually.B.5.6.3.2 Periodi

46、c inspection shall be performed by a competent person. This inspection shall cover the entire length of rope. Only the surface wires shall be required to be inspected. No attempt should be made to open the rope. Any deterioration, resulting in appreciable loss of original strength, such as described

47、 in the following, shall be noted and determination made as to whether use of the rope would constitute a hazard:(a) the points listed in Clause B.5.6.2.1;(b) reduction of the rope diameter below nominal diameter due to loss of core support, internal or external corrosion, or wear of outside wires;(

48、c) severely corroded or broken wires at end connections; and(d) severely corroded, cracked, bent, worn, or improperly applied end connections.B.5.6.3.3 Close inspection of the rope shall be made at sections of rapid deterioration, such as the following:(a) sections in contact with saddles, equalizer

49、 sheaves, or other sheaves where rope travel is limited; and(b) sections of the rope at or near terminal ends where corroded or broken wires can protrude.B.5.6.4 Rope replacementB.5.6.4.1 No precise rules can be given for determination of the exact time for rope replacement, since many variable factors are involved. Once a rope reaches any one the specified removal criteria, it may be allowed