CAN CSA-Z243 183-1989 Information Processing Systems - Open Systems Interconnection - File Transfer Access and Management - Part 4 File Protocol Specification (First Edition).pdf

1、National Standard of Canada CAN/CSA-Z243.183-89 1 IS0 8571-4-1988) ( Reaff i r med 2004) Information Processing Systems-Open Systems Interconnection-File Transfer, Access and Management-Part 4: File Protocol Specification Prepared by Canadian Standards Association Approved by Standards Council of Ca

2、nada ISSN 031 7-5669 Published in March 1989 by Canadian Standards Association, 178 Rexdale Boulevard, Rexdale (Toronto), Ontario, Canada M9W 1R3. The Canadian Standards Association, which operates under the name CSA International (CSA), under whose auspices this National Standard has been produced,

3、 was chartered in 191 9 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities. and users - including manufacturers, consumers, re

4、tailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the

5、 environment. indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs to

6、tal membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association re

7、gularly and continually audits and inspects products that bear the CSA Mark. Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 191 9, the Association has developed the necessary expertise to meet its corporate missio

8、n: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs. For futher information on CS

9、A services, write to CSA International 178 Rexdale Boulevard Toronto, Ontario, M9W 1 R3 Canada CSA standards reflect a national consensus of producers Individuals, companies, and associations across Canada The Association offers certification and testing services In addition to its head office and l

10、aboratory complex in The Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objects o

11、f the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international cooperation in

12、the field of standards. has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide to the greatest practicable extent a balance of representation of producers, users, consume

13、rs, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the

14、 criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards-development organization. Those who have a need to apply standards are encouraged to use N

15、ational Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The responsibility for approving National Standards of Canada rests with the Standards Council o

16、f Canada 45 OConnor Street, Suite 1200 Ottawa, Ontario, K1 P 6N7 Canada A National Standard of Canada is a standard which CSA I NTE RN AT ION A1 / 1 Les normes nationales du Canada sont publiees en versions franiaise et anglaise. Although the intended primary application of this Standard is stated i

17、n its Scope, it is important to note that it remains the responsibility of the users to judge its suitability for their particular purpose. THE CANADIAN STANDARDS ASSOCIATION is a not-for-profit, independent, private sector organization that serves the public, governments, and business as a forum fo

18、r national consensus in the development of Standards, and offers them certification, testing, and related services. individual, company, or organization interested in Standards activities. revised by over 7000 committee members, who represent users, producers, and regulatory authorities in all regio

19、ns of Canada. addition to these volunteers, some 2000 representatives from industry, labour, governments, and the public participate in the work of the Association through sustaining memberships. Approximately one- third of CSAs Standards have been referenced into law by provincial and federal autho

20、rities. and the environment, electricaVelectronics, construction, energy, transportation/distri bution, materials technology, business/production management systems, communications/information technology, and welding. These are all listed in our catalogue, which is available on req u es t . We welco

21、me your comments and inquiries. Further information on Standards programs may be obtained by writing to the Director, Standards Programs, Standards Division or call (41 6) 747-4378. 747-4044 or the nearest Regional Office: Vancouver, Edmonton, Winnipeg, Montreal, or Moncton. mail it to Canadian Stan

22、dards Association, Standards Sales, 178 Rexdale Boulevard, Rexdale (Toronto), Ontario M9W 1R3. It is a membership Association open to any The more than 1000 Standards published by CSA are written, reviewed, and In Activities in the Standards field cover a number of program areas: lifestyles To order

23、 copies of CSA Standards, call our Head Office in Rexdale at (416) To be kept informed of new CSA publications, fill out the form below and Send us this form today if you want to hear more about CSA publications like CAN/CSA-Z243.183-89. Name Title or Dept. Organization Address City Prov./State Coun

24、try Postal/ZiD Code Telephone ( ) Date Technical Editor: Paul V. Bates Managing Editor: Bernard Kelly Canadian Standards Association-1989 All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior permission of th

25、e publisher. Contents Contents Technical Committee on Open Systems v Preface viii 0. Introduction 7 1. Scope 7 2. Field of Application 2 3. References 2 4. Definitions and Abbreviations 2 Section One: General 5. Overview of the File Protocol 3 5.1 Service Supported by the File Protocol 3 5.2 Service

26、s Assumed by the Basic File Protocol 3 5.3 Functions Provided 3 5.4 Model Used 3 5.5 Correspondence Between Service Primitive Names and FPDU Names 5 5.6 Protocol Functional Units 5 Section Two: Basic File Protocol 6. State of the Association Provided 6 6.1 Operation of the Protocol 6 6.2 Additional

27、State Information 6 7. File Protocol Data Units 6 8. File Initiating Entity Actions 8 8.1 FTAM Regime Establishment (Kernel) 8 8.2 FTAM Regime Termination (Orderly) (Kernel) 8 8.3 File Selection (Kernel) 8 8.4 File Deselection (Kernel) 70 8.5 File Creation (Limited Management) 70 8.6 File Deletion (

28、Limited Management) 70 8.7 Read Attributes (Limited Management) 77 8.8 Change Attributes (Enhanced Management) 7 7 8.9 File Open (Read, Write) 77 8.10 File Close (Read, Write) 72 8.11 Begin Group (Grouping) 73 8.12 End Group (Grouping) 73 8.13 Recovery (Recovery) 73 8.14 Locate (Access) 74 8.15 Eras

29、e (Access) 74 9. File Responding Entity Actions 75 9.1 FTAM Regime Establishment (Kernel) 75 9.2 FTAM Regime Termination (Orderly) (Kernel) 75 9.3 File Selection (Kernel) 75 9.4 File Deselection (Kernel) 76 9.5 File Creation (Limited Management) 76 9.6 File Deletion (Limited Management) 76 9.7 Read

30、Attributes (Limited Management) 76 9.8 Change Attributes (Enhanced Management) 77 9.9 File Open (Read, Write) 77 9.10 File Close (Read, Write) 78 9.11 Begin Group (Grouping) 78 9.12 End Group (Grouping) 78 9.13 Recovery (Recovery) 78 9.14 Locate (Access) 79 9.15 Erase (Access) 79 10. File General Ac

31、tions 20 10.1 FTAM Regime Termination (Abrupt) 20 10.2 Protocol Errors 20 Section Three: The Basic Bulk Data Transfer Protocol 11. State of Bulk Data Transfer Activity 27 11.1 State of the Connection Endpoint 27 11.2 Additional State of the Entities 27 12. Bulk Data Transfer Protocol Data Units 22 1

32、3. Bulk Data Transfer Initiating Entity Actions 22 13.1 Read (Read) 22 13.2 Write (Write) 22 13.3 Transfer End (Read, Write) 22 14. Bulk Data Transfer Responding Entity Actions 23 14.1 Read (Read) 23 Information Processing Systems-Open Systems lnterconnection- File Transfer, Access and Management-Pa

33、rt 4: File Protocol Specification March 1989 iii Contents 14.2 Write (Write) 23 14.3 Transfer End (Read, Write) 23 15. Bulk Data Transfer Sending Entity Actions 24 15.1 Send Data (Read, Write) 24 15.2 End of Data Transfer (Read, Write) 24 15.3 Checkpoint Insertion (Read, Write) 24 16. Bulk Data Tran

34、sfer Receiving Entity Actions 24 16.1 Data Transfer (Read, Write) 24 16.2 End of Data Transfer (Read, Write) 24 16.3 Checkpoint Reception (Read, Write) 24 17. Bulk Data Transfer General Actions 25 17.1 Discarding (Read, Write) 25 17.2 Cancel (Read, Write) 25 17.3 Restarting (Restart Data Transfer) 2

35、6 Section Four: The Error Recovery Protocol 18. Protocol Mechanisms 27 18.1 Error Detection and Reporting 27 18.2 Checkpoints 27 18.3 Negotiation of Restart Point 27 18.4 Docket Contents 27 19. Specification of the Error Control Protocol 28 19.1 Normal Operation 28 19.2 Recovery from Errors 30 Secti

36、on Five: Abstract Syntax 20. Abstract Syntax Definition 32 20.1 Conventions 32 20.2 Primitive Types 32 20.3 ASN.l Module Definition 33 20.4 Abstract Syntax Definition 45 21. Application Context Name 45 Section Six: Conformance 22. Conformance 46 22.1 Statement Requirements 46 22.2 Static Requirement

37、s 46 22.3 Dynamic Requirements 46 Annexes A-Protocol State Tables 47 B-Reference to FTAM PDU Definitions 86 C-ASN.l Cross Reference 87 iv CAN/CSA-Z243.183-89 March 1989 Technical Committee Technical Committee on Open Systems D.A. Sheppard C. Ashford J. Berube A. Bickle A. Bignell G.V. Bochmann D. Bo

38、nyun P. Bowie B. L. Catley B.S. Colwell J. Costa R.J. Craven G.P. Dallaire R. Dexter D.B. Forsyth G. Gori M.D. Harrop Protocols, Standards and Corn mu n ication Incorporated, Ottawa, Ontario Bell-Northern Research Limited, Ottawa, Ontario Atkinson, Tremblay CANKSA-Z243.181, Part 2: Virtual Filestore

39、 Definition; CANKSA-Z243.182, Part 3: File Service Definition; and CANKSA-Z243.183, Part 4: File Protocol Specification. This Series of Standards on File Transfer, Access and Management (FTAM), consists of These Standards are identical to International Standard IS0 8571 Parts 1, 2, 3, and 4. As a me

40、mber country of ISOAEC JTC1, Canada participated actively in this work through the CSA Technical Committee on Open Systems which, in addition to its role as a National Standards Committee, is the Canadian Advisory Committee (CAC) on ISOAEC JTCl/SC21. Systems under the jurisdiction of the Standards S

41、teering Committee on Information Processing Systems and was formally approved by these Committees. It has been approved as a National Standard of Canada by the Standards Council of Canada. March 1989 Notes: (1) Use of the masculine gender in this Standard is not meant to exclude the feminine gender

42、when applied to persons. Similarly, use of the singular does not exclude the plural (and vice versa) when the sense allows. (2) Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the user of the Standard to

43、 judge its suitability for his particular purpose. (3) CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appropriate committee. (4) All enquiries regarding this Standard, including requests for interpretation, should be addressed to Canadian

44、Standards Association, Standards Division, 178 Rexdale Boulevard, Rexdale, Ontario M9 W 1 R3. (a) define the problem, making reference to the specific clause, and, where appropriate, include an illustrative sketch; (b) provide an explanation of circumstances surrounding the actual field condition; a

45、nd This Standard was reviewed and adopted by the CSA Technical Committee on Open Requests for interpretation should viii CAN/CsA-Z243.183-89 March 1989 Preface (c) be phrased where possible to permit a specific “yes” or “no” answer. sample copy, write to CSA Marketing or telephone (416) 747-4019. In

46、terpretations are published in CSA Information Update. For subscription details and a free Information Processing Systems-Open Systems Interconnection- File Transfer, Access and Management-Part 4: File Protocol Specification March 1989 ix CAN/CSA-Z243.183-89 March 1989 INTERNATIONAL STANDARD IS0 857

47、1-4 : 1988 (E) File Protocol Specification Information processing systems - Open Systems Interconnection - File Transfer, Access and Management - provision of service t -7 use of service Presentation and ACSE Service Definitions Part 4 : File Protocol Specification 0 Introduction IS08571 is one of a

48、 set of International Standards produced to facilitate the interconnection of computer systems. Its relation to other International Standards in the set is defined by the Reference Model for Open Systems Interconnection (IS0 7498). The Reference Model subdivides the area of standardization for inter

49、connection into a series of layers of specification, each of manageable size. The aim of Open Systems Interconnection is to allow, with a minimum of technical agreement outside the interconnection standards, the interconnection of computer systems: a) from different manufacturers, b) under different managements, c) of different levels of complexity, d) of different ages. IS0 8571 defines a file service and specifies a file protocol available within the application layer of the Reference Model. The service defined is of the category Application Service Element (ASE). It is concerned wi