CAN CSA-Z317 13-2012 Infection control during construction renovation and maintenance of health care facilities (Third Edition Incorporating Errata August 2015 Update No 1 January .pdf

1、REVISED JANUARY 2016CAN/CSA Z317.13-12National Standard of Canada(approved January 2016)Infection control during construction,renovation, and maintenance of healthcare facilitiesLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus

2、 standards development process approvedby the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achievin

3、g consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditio

4、ns concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringementof any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes

5、no representations or warranties regarding this documents compliance with any applicablestatute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENT

6、AL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY O

7、F LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional

8、or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no respon

9、sibility whatsoeverarising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the

10、 contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee, of all works contained herein that are protected

11、by copyright, all trade-marks (except as otherwise noted to the contrary), and allinventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected bypatents and applications for patents. Without limitation, the unauthorized use, modi

12、fication, copying, or disclosure of this document mayviolate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law,

13、 CSA Group reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this

14、standard are expressly advised that determination of the validity ofany such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly

15、 the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons wh

16、o are authorized by CSA Group to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA G

17、roup; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use

18、 of this documentconstitutes your acceptance of the terms and conditions of this Legal Notice.Revision HistoryZ317.13-12, Infection control during construction, renovation, andmaintenance of health care facilitiesErrata August 2015 Revision symbol (inmargin)Technical Committee and SubcommitteeNation

19、al Standard of Canada January 2016Outside front cover, National Standard of Canada text, title page, and preface.Standards Update ServiceCAN/CSA Z317.13-12December 2012Title: Infection control during construction, renovation, and maintenance of health carefacilitiesTo register for e-mail notificatio

20、n about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2422101.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.c

21、sagroup.org/legal to find out how we protect yourpersonal information.Canadian Standards Association (operating as “CSA Group”), underwhose auspices this National Standard has been produced, waschartered in 1919 and accredited by the Standards Council ofCanada to the National Standards system in 197

22、3. It is a not-for-profit, nonstatutory, voluntary membership association engaged instandards development and certification activities.CSA Group standards reflect a national consensus of producers andusers including manufacturers, consumers, retailers, unions andprofessional organizations, and gover

23、nmental agencies. Thestandards are used widely by industry and commerce and oftenadopted by municipal, provincial, and federal governments in theirregulations, particularly in the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associations across

24、Canada indicatetheir support for CSA Groups standards development byvolunteering their time and skills to Committee work and supportingCSA Groups objectives through sustaining memberships. The morethan 7000 committee volunteers and the 2000 sustainingmemberships together form CSA Groups total member

25、ship fromwhich its Directors are chosen. Sustaining memberships represent amajor source of income for CSA Groups standards developmentactivities.CSA Group offers certification and testing services in support of andas an extension to its standards development activities. To ensurethe integrity of its

26、 certification process, CSA Group regularly andcontinually audits and inspects products that bear theCSA Group Mark.In addition to its head office and laboratory complex in Toronto, CSAGroup has regional branch offices in major centres across Canadaand inspection and testing agencies in eight countr

27、ies. Since 1919,CSA Group has developed the necessary expertise to meet itscorporate mission: CSA Group is an independent serviceorganization whose mission is to provide an open and effectiveforum for activities facilitating the exchange of goods and servicesthrough the use of standards, certificati

28、on and related services tomeet national and international needs.For further information on CSA Group services, write toCSA Group178 Rexdale BoulevardToronto, Ontario, M9W 1R3CanadaA National Standard of Canada is a standard developed by an SCC-accredited Standards Development Organization (SDO), and

29、approved by the Standards Council of Canada (SCC), in accordancewith SCCs: Requirements and Guidance Accreditation forStandards Development Organizations, and Requirements andGuidance Approval of National Standards of Canada Designation.More information on National Standard requirements can be found

30、at www.scc.ca.An SCC-approved standard reflects the consensus of a number ofexperts whose collective interests provide, to the greatestpracticable extent, a balance of representation of affectedstakeholders. National Standards of Canada are intended to make asignificant and timely contribution to th

31、e Canadian interest.SCC is a Crown corporation within the portfolio of Industry Canada.With the goal of enhancing Canadas economic competitiveness andsocial well-being, SCC leads and facilitates the development and useof national and international standards. SCC also coordinatesCanadian participatio

32、n in standards development, and identifiesstrategies to advance Canadian standardization efforts.Accreditation services are provided by SCC to various customers,including product certifiers, testing laboratories, and standardsdevelopment organizations. A list of SCC programs and accreditedbodies is

33、publicly available at www.scc.ca.Users should always obtain the latest edition of a National Standardof Canada from the standards development organization responsiblefor its publication, as these documents are subject to periodicreview.Standards Council of Canada600-55 Metcalfe StreetOttawa, Ontario

34、, K1P 6L5CanadaCette Norme Nationale du Canada est disponible en versions franaise et anglaise.Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility ofthe users to judge its suitability for their particular purpo

35、se.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”ICS 11.080.01; 11.080.99ISBN 978-1-77139-032-3 2012 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoeverwithout the prior permission of the publisher.Published in December 2

36、012 by CSA GroupA not-for-profit private sector organization178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Associat

37、ion,operating as “CSA Group”Prepared byApproved byInfection control duringconstruction, renovation, andmaintenance of health care facilitiesCAN/CSA Z317.13-12(approved January 2016)National Standard of CanadaCAN/CSA Z317.13-12Infection control during construction, renovation, andmaintenance of healt

38、h care facilitiesDecember 2012 2012 CSA Group 1ContentsTechnical Committee on Health Care Facility Engineering and Physical Plant 4Subcommittee on Infection Control during Construction, Renovation, and Maintenance of Health CareFacilities 6Preface 80 Introduction 101 Scope 112 Reference publications

39、 123 Definitions and abbreviations 143.1 Definitions 143.2 Abbreviations 184 General 194.1 Quality System 194.2 Risk factors related to construction, renovation, and maintenance 204.3 Sources of contamination and construction-related infections in health care facilities 215 Construction materials 23

40、5.1 Selection 235.2 Use of construction materials 245.3 Shipping, handling, and storage of construction materials 245.3.1 General 245.3.2 Construction materials susceptible to contaminants and moisture damage 245.3.3 Mechanical equipment and ductwork 255.3.4 Woven fabrics, fabric-covered products, a

41、nd wood-based composite core products withveneers 266 Procedures 266.1 General 266.2 Multidisciplinary teams 286.2.1 General 286.2.2 The site MDT 296.2.3 The construction project MDT 306.3 Personnel and their responsibilities 306.3.1 General 306.3.2 Infection prevention and control professional (ICP

42、) 316.3.3 Administrators 316.3.4 Facility project manager 316.3.5 Environmental services personnel 316.3.6 Health care staff 326.3.7 Design and management professionals 326.3.8 Operation and maintenance staff 32CAN/CSA Z317.13-12Infection control during construction, renovation, andmaintenance of he

43、alth care facilitiesDecember 2012 2012 CSA Group 26.3.9 Constructors 336.4 Plumbing and ventilation systems 336.5 Preventive measures analysis 346.6 Air quality 356.6.1 Dust control 356.6.2 Negative air anteroom 396.6.3 Air filtration 406.6.4 Operation, preventive maintenance, and storage of CAHUs 4

44、06.6.5 Movement of CAHUs 426.6.6 Air sampling and monitoring 436.7 Water quality 456.8 Water system treatment 476.9 Constructors request for service shutdowns and for activities presenting specific hazards 496.10 Excavation, demolition, or significant construction in proximity to the HCF 506.10.1 Ge

45、neral 506.10.2 Risk assessment 506.10.3 Prevention and control strategies 516.10.4 Contingency planning 527 Infection prevention and control measures for renovation, repairs, and maintenance 527.1 Before construction 527.1.1 General 527.1.2 Preventive Measure I 527.1.3 Preventive Measure II 537.1.4

46、Preventive Measure III 537.1.5 Preventive Measure IV 547.2 During construction 547.2.1 Preventive Measure I 547.2.2 Preventive Measure II 547.2.3 Preventive Measure III 567.2.4 Preventive Measure IV 597.3 After construction 607.3.1 Preventive Measure I 607.3.2 Preventive Measures II and III 617.3.3

47、Preventive Measure IV 617.4 Ceiling access for investigation and minor work 617.4.1 General 617.4.2 Ceiling access exceptions for construction activity Type B and Population Risk Group 1 or2 627.4.3 Ceiling access exceptions for construction activity Type A or B and Population Risk Group 3 or4 628 I

48、nfection prevention and control measures for new construction projects 628.1 General 638.2 Before construction 658.3 During construction 698.3.1 General 698.3.2 Construction Phase 1 Excavation, foundation, building envelope, and floors 748.3.3 Construction Phase 2 Walls and ceilings 74CAN/CSA Z317.1

49、3-12Infection control during construction, renovation, andmaintenance of health care facilitiesDecember 2012 2012 CSA Group 38.3.4 Construction Phase 3 Interior finishing 758.3.5 Construction Phase 4 Final finishing 778.3.6 Construction Phase 5 Completion and follow-up activities 798.4 After construction 798.4.1 Preventive Measure I 798.4.2 Preventive Measures II and III 798.4.3 Preventive Measure IV 809 Remedial measures 809.1 General 809.2 Water leaks and flooding 809.3 Investigation 809.4 Containment of contaminants 819.5 Corrective measure