CEA-803-B-2012 Mobile Electronics Wiring Designations for Audio and Vehicle Security Convenience.pdf

1、 ANSI/CEA Standard Mobile Electronics Wiring Designations for Audio and Vehicle Security/Convenience ANSI/CEA-803-B November 2012 NOTICE Consumer Electronics Association (CEA) Standards, Bulletins and other technical publications are designed to serve the public interest through eliminating misunder

2、standings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards, Bulletins and other technical publications s

3、hall not in any respect preclude any member or nonmember of CEA from manufacturing or selling products not conforming to such Standards, Bulletins or other technical publications, nor shall the existence of such Standards, Bulletins and other technical publications preclude their voluntary use by th

4、ose other than CEA members, whether the standard is to be used either domestically or internationally. Standards, Bulletins and other technical publications are adopted by CEA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, CEA does not assume any l

5、iability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, Bulletin or other technical publication. This document does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibilit

6、y of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. This document is copyrighted by the Consumer Electronics Association (CEA) and may not be reproduced, in whole or part, without written per

7、mission. Federal copyright law prohibits unauthorized reproduction of this document by any means. Organizations may obtain permission to reproduce a limited number of copies by entering into a license agreement. Requests to reproduce text, data, charts, figures or other material should be made to CE

8、A. (Formulated under the cognizance of the CEA R6 Portable, Handheld and In-Vehicle Electronics Committee.) Published by CONSUMER ELECTRONICS ASSOCIATION 2012 Technology Phone 800-854-7179; Fax 303-397-2740; Internet http:/; Email Pantone Color Formula Guide Pantone, Inc., 590 Commerce Blvd., Carls

9、tadt, New Jersey, 07072-3098 USA; Phone 201 935 5500; Fax 201 896 0242; Internet http:/; Email customer_ 3 Audio Terms Standard wiring audio terms shall be those indicated in Table 1, Column A. 3.1 Abbreviations of Audio Terms Standard wiring audio terms shall be abbreviated as indicated in Table 1,

10、 Column B. 3.2 Definitions of Audio and Vehicle Navigation Terms Standard audio and vehicle navigation wiring terms shall be defined as indicated in Table 1, Column C. 3.3 Color Codes Standard color codes are defined in Table 1; Column D. Colors shall be used on wires and connectors. 3.4 Color Palet

11、te CEA-803-B does not specify the exact shade or hue of color for use to comply with this standard. However, to provide a consistent reference for manufacturing conformity, the following colors are recommended from the Pantone Color Formula Guide. All color numbers are followed by a “C” denoting swa

12、tches for coated printing stock. The color examples shown in Table 1, Column E, may vary in appearance depending upon CRT calibration, printer, paper quality, etc. For exact color references, users should consult a recently published Pantone color guide. An example of the color reference is displaye

13、d in Table 1, Column E. 3.5 Labeling The abbreviations provided in Table 1; Column B may be used to identify the electrical signals to the installer as applicable. CEA-803-B 2 Column A Column B Column C Column D Column E Wire Abbr. Def. Color(Pantone Specification) Color Example 1. Battery (+) BATT

14、(+) 12 volt constant power for source unit memory Yellow (012 C) 2. Accessory (+) ACC (+) 12 volt wire to energize source unit when key is on/accessory position Red (032 C) 3. Ground (-) GND (-) chassis ground Black (Pantone Black) 4. Illumination (+) ILL (+) wire used to backlight source unit Orang

15、e (1505 C)/White (Not Applicable) 5. Dimmer (+) DIM (+) activated with head light switch (adjustable intensity or ground return) Orange (1505 C) 6. Remote Turn-on (+) REM ON (+) output from source unit used to trigger amp or accessory Blue (Process Blue C)/White (Not Applicable) 7. Power Antenna (+)

16、 PWR ANT (+) output from source unit used to trigger electric antenna Blue (Process Blue C) 8. Left Front Line Level LF LINE Left front wire (positive + negative) Dark Blue (PMS 2747) 9. Right Front Line Level RF LINE Right front wire (positive + negative) Light Red (PMS 1767) 10. Center Line Level

17、C LINE Center wire (positive + negative) Dark Green (PMS 343) 11. Left Surround Line Level LS LINE Left surround wire (positive + negative) Light Blue (PMS 2707) 12. Right Surround Line Level RS LINE Right surround wire (positive + negative) Light Grey (PMS 621) 13. Subwoofer 1 Line Level SUB1 LINE

18、Subwoofer 1 wire (positive + negative) Purple (PMS 253) 14. Subwoofer 2 Line Level SUB2 LINE Subwoofer 2 wire (positive + negative) Light Purple (PMS 250) 15. Right Back Line Level RB LINE Right back wire (positive + negative) Tan (PMS 466) 16. Left Back Line Level LB LINE Left back wire (positive +

19、 negative) Dark Yellow (PMS 104) 17. Left Front Speaker(+) LF SPK (+) left front speaker wire (positive) White (Not Applicable) 18. Left Front Speaker (-) LF SPK (-) left front speaker wire (negative) White (Not Applicable_/ Black (Pantone Black) 19. Right Front Speaker (+) RF SPK(+) right front spe

20、aker wire (positive) Grey (Cool Grey 7C) 20. Right Front Speaker (-) RF SPK (-) right front speaker wire (negative) Gray (Cool Grey 7C)/Black (Pantone Black) 21. Left Rear Speaker (+) LR SPK (+) left rear speaker wire (positive) Green (361 C) 22. Left Rear Speaker (-) LR SPK (-) left rear speaker wi

21、re (negative) Green (361 C)/Black (Pantone Black) 23. Right Rear Speaker (+) RR SPK (+) right rear speaker wire (positive) Violet(2582 C) 24. Right Rear Speaker (-) RR SPK (-) right rear speaker wire (negative) Violet (2582 C)/Black (Pantone Black) 25. Audio Mute (-) MUTE (-) used to silence from so

22、urce unit Brown (1535 C) 26. Subwoofer/Center Channel Speaker (+) SUB/CTR SPK (+) subwoofer/center channel (positive) Not Designated 26a. Subwoofer/Center Channel Speaker (-) SUB/CTR SPK (-) subwoofer/center channel (negative) Not Designated 27. Vehicle Speed Pulse VSS (A/C) Vehicle Speed pulse dete

23、ction signal, digital or analog, A.C. Pink (189 C) 28. Parking Brake PARK BRAKE (+) Parking brake detection signal Light Green (358 C) 29. Reverse Gear Detection RVS GEAR Reverse gear detection Violet(2582 C)/ White(Not Applicable) Table 1 Standard Audio Definitions, Abbreviations, and Color Codes C

24、EA-803-B 3 4 Vehicle Security Terms Standard vehicle security terms shall be those indicated in Table 2, Column A. 4.1 Abbreviations of Vehicle Security Terms Standard vehicle security terms shall be abbreviated as indicated in Table 2, Column B. 4.2 Definitions of Vehicle Security Terms Standard ve

25、hicle security terms shall be defined as indicated in Table 2, Column C. 4.3 Labeling The abbreviations provided in Table 2; Column B may be used to identify the electrical signals to the installer as applicable. CEA-803-B 4 Column A Column B Column C Column D Wire Abbr. Def. Color 1. Battery (+) BA

26、TT 12 volt uninterrupted wire from the battery Not designated 2. Ignition 1A (+) IGN 1A ignition switch wire energized with the key in the run & crank position Not designated 3. Ignition 1B (+) IGN 1B ignition switch wire energized with the key in the run & crank position Not designated 4. Ignition

27、2A (+) IGN 2A ignition switch wire energized with the key in the run position only Not designated 5. Ignition 2B (+) IGN 2B ignition switch wire energized with the key in the run position only Not designated 6. Accessory (+) ACC ignition switch wire energized in accessory & run position only Not des

28、ignated 7. Starter 1 START SOL ignition switch wire which engages the starter motor & is energized in the crank position only Not designated 8. Starter 2 START ignition switch wire that is energized in the crank position only (for computer only) Not designated 9. Door Trigger (-) DR TRIG door switch

29、 wire Not designated 10. Hood Trigger (-) HD TRIG wire for hood pin switch Not designated 11. Parking Lights (-) PRK LTS wire used to energize parking lights Not designated 12. Headlights (+) HD LTS wire used to energize head lights Not designated 13. Power Door Lock PWR LCK wire used to trigger all

30、 doors to lock Not designated 14. Power Door Unlock PWR UNLCK wired used to trigger all doors to unlock Not designated 15. Drivers Motor Lock DR MTR LCK drivers door lock motor wire Not designated 16. Drivers Motor Unlock DR MTR UNLCK drivers door unlock motor wire Not designated 17. Passenger Motor

31、 Unlock PASS MTR UNLCK prevents the interior doorlock switch from disarming the aftermarket security system Not designated 18. Horn HORN horn trigger Not designated 19. Factory Arm FACT ARM wire used to activate factory alarm (may also lock the doors in some vehicles) Not designated 20. Factory Disa

32、rm FACT DISARM wire used to deactivate factory alarm (may also unlock the doors in some vehicles) Not designated 21. Tach Sense TACH SENSE wire used to determine engine RPM Not designated 22. Key Sense KEY SENSE wire used to determine if the key is in ignition solenoid Not designated 23. Neutral Saf

33、ety NEUTRAL wire used to determine if the car is in gear Not designated 24. Brake BRAKE wire used to determine if brake pedal is depressed Not designated 25. Reverse Light REVERSE wire used to determine if the back-up lights are on Not designated 26a. Left Front Window Roll-up LFW UP wire used to tr

34、igger the window up Not designated 26b. Left Front Window Roll-down LFW DOWN wire used to trigger the window down Not designated 26c. Right Front Window Roll-up RFW UP wire used to trigger the window up Not designated 26d. Right Front Window Roll-down RFW DOWN wire used to trigger the window down No

35、t designated 26e. Left Rear Window Roll-up LRW UP wire used to trigger the window up Not designated 26f. Left Rear Window Roll-down LRW DOWN wire used to trigger the window down Not designated 26g. Right Rear Window Roll-up RRW UP wire used to trigger the window up Not designated 26h. Right Rear Win

36、dow Roll-down RRW DOWN wire used to trigger the window down Not designated 27. Trunk Release TRK REL wire used to activate trunk/motor or solenoid Not designated 28. Wiper WIPER wire used to determine if wipers are on Not designated 29. Trunk Trigger Wire TRK TRG wire used for trunk pin switch Not d

37、esignated Table 2 Standard Vehicle Security Term Definitions CEA Document Improvement Proposal If in the review or use of this document a potential change is made evident for safety, health or technical reasons, please email your reason/rationale for the recommended change to standardsce.org. Consumer Electronics Association Technology & Standards Department 1919 S Eads Street, Arlington, VA 22202 FAX: (703) 907-7693 standardsce.org