CEN ISO TS 16410-2-2012 Electronic fee collection - Evaluation of equipment for conformity to CEN ISO TS 17575-3 - Part 2 Abstract test suite (ISO TS 16410-2 2012)《电子收费 符合ISO TS 17.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationElectronic fee collection Evaluation of equipment for conformity to ISO/TS 17575-3Part 2: Abstract test suitePD CEN ISO/TS 16410-2:2012Copyright European Committee for Standardiz

2、ation Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis Published Document is the UK implementation of CEN ISO/TS 16410-2:2012.The UK participation in its preparation was entrusted to Technical CommitteeEPL/

3、278, Road transport informatics.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institutio

4、n 2012Published by BSI Standards Limited 2012ISBN 978 0 580 71835 9ICS 03.220.20; 35.240.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 30 April 2012.Amendmen

5、ts issued since publicationAmd. No. Date Text affectedPUBLISHED DOCUMENTPD CEN ISO/TS 16410-2:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TECHNICAL SPECIFICATION SPCIFICA

6、TION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 16410-2 March 2012 ICS 35.240.60; 03.220.20 English Version Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 2: Abstract test suite (ISO 16410-2:2012) Perception du tlpage - valuation de la conformit de lqu

7、ipement lISO/TS 17575-3 - Partie 2: Suite dessais abstraite (ISO 16410-2:2012) Elektronische Gebhrenerhebung - Konformittsevaluierung von Einrichtungen nach CEN ISO/TS 17575-3 - Teil 2: Abstrakte Prfreihe (ISO 16410-2:2012) This Technical Specification (CEN/TS) was approved by CEN on 30 January 2012

8、 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required

9、to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversi

10、on of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Polan

11、d, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form a

12、nd by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TS 16410-2:2012: EPD CEN ISO/TS 16410-2:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CEN ISO/

13、TS 16410-2:2012 (E) 2 Contents Page Foreword 3PD CEN ISO/TS 16410-2:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CEN ISO/TS 16410-2:2012 (E) 3 Foreword This document (CEN

14、ISO/TS 16410-2:2012) has been prepared by Technical Committee CEN/TC 278 “Road transport and traffic telematics“, the secretariat of which is held by NEN, in collaboration with Technical Committee ISO/TC 204 “Intelligent transport systems“. Attention is drawn to the possibility that some of the elem

15、ents of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Tec

16、hnical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerlan

17、d, Turkey and the United Kingdom. PD CEN ISO/TS 16410-2:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO/TS 16410-2:2012(E) ISO 2012 All rights reserved iiiContents Page I

18、ntroduction . v 1 Scope 1 2 Normative references 1 3 Terms and definitions . 1 4 Abbreviations . 2 5 Abstract Test Method (ATM) 2 5.1 Implementations Under Tests 2 5.1.1 Front-End (FE) . 2 5.1.2 Back-End (BE) 2 5.2 Test architecture 2 5.3 Protocol Implementation Extra Information for Testing (PIXIT)

19、 . 3 6 Untestable Test Purposes (TP) 3 7 ATS data structures 3 7.1 ASN.1 description 3 8 External functions . 4 8.1 Functions for communications 4 9 Message filtering . 4 10 ATS naming conventions . 4 10.1 Definition naming conventions 5 10.2 Test Case identifier . 6 10.3 TTCN-3 modules identifier 6

20、 Annex A (normative) TTCN-3 Library modules for FE and BE . 8 Annex B (informative) PIXIT proforma for FE and BE . 9 Bibliography 12 PD CEN ISO/TS 16410-2:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted

21、without license from IHS-,-,-ISO/TS 16410-2:2012(E) ISO 2012 All rights reserved vIntroduction This part of ISO/TS 16410 is part of a set of standards that supports interoperability of autonomous EFC-systems, which includes ISO/TS 17575 parts 1 to 4 that define the EFC context data, their charge rep

22、orts and their use of communication infrastructure. Within the suite of EFC standards this conformance evaluation procedure defines the process and tests for conformity evaluation of Front End and Back End that comply with the requirements in ISO/TS 17575-3. This part of ISO/TS 16410 is intended to

23、assess Front End and Back End capabilities, assess Front End and Back End behaviour, serve as a guide for Front End and Back End conformance evaluation and type approval, achieve comparability between the results of the corresponding tests applied in different places at different times, and facilita

24、te communications between parties. This part of ISO/TS 16410 is based on ISO/TS 17575-3, and the ISO/IEC 9646 family of standards on conformance test methodology. PD CEN ISO/TS 16410-2:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reprodu

25、ction or networking permitted without license from IHS-,-,-TECHNICAL SPECIFICATION ISO/TS 16410-2:2012(E) ISO 2012 All rights reserved 1Electronic fee collection Evaluation of equipment for conformity to ISO/TS 17575-3 Part 2: Abstract test suite 1 Scope This part of ISO/TS 16410 specifies the Abstr

26、act Test Suite (ATS) to evaluate the conformity of Front End and Back End to ISO/TS 17575-3. The objective of this part of ISO/TS 16410 is to provide a basis for conformance tests for the Front End and the Back End in Electronic Fee Collection to enable interoperability between different equipment s

27、upplied by different manufacturers. The present abstract test suite is directly derived from ISO/TS 17575-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references,

28、 the latest edition of the referenced document (including any amendments) applies. ISO/TS 17575-1:2010, Electronic fee collection Application interface definition for autonomous systems Part 1: Charging ISO/TS 17575-2, Electronic fee collection Application interface definition for autonomous systems

29、 Part 2: Communication and connections to the lower layers ISO/TS 17575-3, Electronic fee collection Application interface definition for autonomous systems Part 3: Context data 3 Terms and definitions For the purposes of this document the following terms and definitions apply. 3.1 conformance testi

30、ng testing the extent to which an IUT is a conforming implementation ISO/IEC 9646-1:1994, definition 3.3.23 3.2 implementation under test an implementation of one or more OS1 protocols in an adjacent user/provider relationship, being that part of a real open system which is to be studied by testing

31、ISO/IEC 9646-1:1994, definition 3.3.43 PD CEN ISO/TS 16410-2:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO/TS 16410-2:2012(E) 2 ISO 2012 All rights reserved3.3 system u

32、nder test the real open system in which the IUT resides ISO/IEC 9646-1:1994, definition 3.3.103 3.4 test case an abstract or executable test case ISO/IEC 9646-1:1994, definition 3.3.107 4 Abbreviations For the purposes of this document, the following abbreviations apply, unless otherwise specified.

33、BE Back End DUT Device Under Test EUT Equipment Under Test FE Front End IUT Implementation Under Test PIXIT Protocol Implementation Extra Information for Testing SCS Semiconductor Characterization System SUT System Under Test TC Test Case 5 Abstract Test Method (ATM) This clause describes the ATM us

34、ed to test the layers at the FE side and at the BE side. 5.1 Implementations Under Tests 5.1.1 Front-End (FE) The part(s) of the toll system where usage data for an individual user are collected, processed and delivered to the Back End. The Front End comprises the on-board equipment and optionally a

35、 proxy. 5.1.2 Back-End (BE) Generic name for the computing and communication facilities of the Service Provider and/or the Toll Charger (see ISO/TS 17575-3). 5.2 Test architecture The implementation under test is either the FE or the BE. The System under test comprises also the communication sub-lay

36、er, which is necessary to perform the IUT tests. PD CEN ISO/TS 16410-2:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO/TS 16410-2:2012(E) ISO 2012 All rights reserved 3Th

37、e tester executes the TTCN-3 test cases of the present Test Specification, running on an emulated communication sub-layer. The figure below describes the test architecture. 5.3 Protocol Implementation Extra Information for Testing (PIXIT) The supplier of the Front End and Back End, respectively, is

38、responsible for providing a Protocol Implementation Extra Information for Testing (PIXIT). The supplier of the Front End and the Back End shall complete a PIXIT; see Annex B for a proforma. Communication Sub-layerTTCN-3Test executionTESTER SYSTEM UNDER TESTIUTTS 17575-3(FE or BE)eaPort pcoFigure 1 T

39、est system architecture 6 Untestable Test Purposes (TP) This clause gives a list of TPs which are not implemented in the Abstract Test Suite due to the chosen Abstract Test Method or other restrictions. Table 1 Untestable TPs Test purpose Reason (empty) (empty) NOTE Currently no untestable TPs have

40、been identified. 7 ATS data structures 7.1 ASN.1 description The ATS is based on the following ASN.1 description: ContextDataModule: it provides the ASN.1 description for ContextData support, including ISO/TS17575-3 ADU descriptions, ChargingModule: it provides the ASN.1 description for charging sup

41、port, including ChargeReport and ChargeReportResponse, PD CEN ISO/TS 16410-2:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO/TS 16410-2:2012(E) 4 ISO 2012 All rights rese

42、rved EfcModule: : it provides the ASN.1 description for dedicated short-range communication, CccModule: : it provides the ASN.1 description for Radio Communication between Road-side Equipment and Onboard Equipment, DSRCModule: it provides the ASN.1 description for dedicated short-range communication

43、, AVIAEINumberingAndDataStructures: it provides the ASN.1 description for Automatic vehicle and equipment identification. 8 External functions All external functions are part of the common TTCN-3 source code. 8.1 Functions for communications The two following external functions shall be defined to i

44、nitialize the communication stack as described in ISO/TS 17575-2. These functions are called during preamble (initialization) and postamble (termination) processing. Table 2 Communication initialization functions Nbr Computation Role 1 fx_com_Initialize() This function initializes the communication

45、stack 2 fx_com_DeInitialize() This function de-initializes the communication stack 9 Message filtering As indicated in the relevant TSS and TP document, Electronic fee collection Evaluation of equipment for conformity to CEN ISO/TS 17575-1 Part 1: Test suite structure and test purpose Clause A.1.1,

46、the ADUs exchanged between the IUT and the tester, which are not part of the test purpose, shall be ignored. Thus, a receive event statement was added in the default behaviour, to ignore messages received on the “pco” port, which have a valid ADU structure and were not handled in the test case behav

47、iour. The corresponding TTCN-3 code is as following: pco.receive(mw_Iso17575_3Adu_default) repeat; / Ignore ADU 10 ATS naming conventions The ATS naming conventions are intended to provide an easier reading of the ATS by using rules for naming objects. PD CEN ISO/TS 16410-2:2012Copyright European Co

48、mmittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO/TS 16410-2:2012(E) ISO 2012 All rights reserved 510.1 Definition naming conventions To define the ATS naming conventions, the following principle are taken into consideration: Prefixes are short alphabetic string indicating the type of TTCN-3 element it represents (see table 3 below)