CEN TR 15316-6-1-2017 Energy performance of buildings- Method for calculation of system energy requirements and system efficiencies - Part 6-1 Explanation and justification of EN 1.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Energy performance of buildings Method for calculation of system energy requirements and system efficienciesPart 6-1: Explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4PD CEN/TR 15316-6-1:2

2、017TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-1 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings- Method for calculation of system energy requirements and system efficiencies - Part 6-1: Explanation and justification of EN 15316-1

3、, Module M3-1, M3-4, M3-9, M8-1, M8-4 Performance nergtique des btiments - Mthode de calcul des besoins nergtiques et des rendements des systmes - Partie 1 : Explication et justification de lEN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4 Heizungsanlagen und Wasserbasierte Khlanlagen in Gebuden - Ve

4、rfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 6-1: Begleitende TR zur EN 15316-1 (Allgemeines und Darstellung der Energieeffizienz) This Technical Report was approved by CEN on 27 February 2017. It has been drawn up by the Technical Committee CEN/TC 228. CEN me

5、mbers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Port

6、ugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation

7、in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 15316-6-1:2017 ENational forewordThis British Standard is the UK implementation of PD CEN/TR 15316-6-1:2017.The UK participation in its preparation was entrusted to Technical Committee RHE/24, Central heating i

8、nstallations.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published

9、by BSI Standards Limited 2017ISBN 978 0 580 95138 1ICS 91.120; 27.160; 91.140.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2017.Amendments/corrigenda

10、 issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CEN/TR 15316-6-1:2017TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-1 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings- Method for calculation of system energy requiremen

11、ts and system efficiencies - Part 6-1: Explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4 Performance nergtique des btiments - Mthode de calcul des besoins nergtiques et des rendements des systmes - Partie 1 : Explication et justification de lEN 15316-1, Module M3-1, M3

12、-4, M3-9, M8-1, M8-4 Heizungsanlagen und Wasserbasierte Khlanlagen in Gebuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 6-1: Begleitende TR zur EN 15316-1 (Allgemeines und Darstellung der Energieeffizienz) This Technical Report was approved by CEN on 27

13、 February 2017. It has been drawn up by the Technical Committee CEN/TC 228. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irela

14、nd, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Managem

15、ent Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 15316-6-1:2017 EPD CEN/TR 15316-6-1:2017CEN/TR 15316-6-1:2017 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope .

16、 11 2 Normative references . 11 3 Terms and definitions 12 4 Symbols and subscripts . 13 4.1 Symbols 13 4.2 Subscripts 13 5 Description of the methods 13 5.1 General . 13 5.1.1 Modular structure 13 5.1.2 Heating system zoning . 14 5.1.3 Domestic hot water system zoning 15 5.1.4 Specification on inte

17、raction between BACS/space heating, cooling and DHW systems 16 5.2 Description of the calculation method . 17 5.2.1 Calculation direction . 17 5.2.2 Operating conditions 17 5.2.3 Maximum heat supply and power check . 18 5.2.4 Multiservice and operating of multi generator systems (load dispatching) 1

18、9 5.2.5 Heating and domestic hot water system thermal losses 19 5.2.6 Auxiliary energy . 19 5.2.7 Sub-system energy balance 21 5.2.8 Interaction with other technical building systems 22 5.3 Optional methods . 22 5.4 Application data 22 6 Calculation procedure 22 6.1 Output data . 22 6.2 Calculation

19、interval and calculation period . 24 6.2.1 General . 24 6.2.2 Calculation interval . 25 6.2.3 Calculation period 25 6.3 Input data 25 6.3.1 General . 25 6.3.2 Product data . 26 6.3.3 System design data 27 6.3.4 Operating data and boundary conditions . 28 6.3.5 Other data . 31 6.4 Domestic hot water

20、energy use calculation 31 6.4.1 Domestic hot water emission output per domestic hot water system zone . 31 6.4.2 Domestic hot water distribution calculation . 33 6.4.3 Also the domestic hot water circulation loop can be turned off. In this case the temperature of the loop Domestic hot water storage

21、calculation 34 6.5 Space heating energy use calculation . 35 6.5.1 Generalities 35 PD CEN/TR 15316-6-1:2017CEN/TR 15316-6-1:2017 (E) 3 6.5.2 Space heating emission useful output per space heating system zone . 35 6.5.3 Heating system control . 37 6.6 Nodes calculation 40 6.6.1 General . 40 6.6.2 Nod

22、e output energy flow (load circuits) 42 6.6.3 Node supply (flow) temperature 42 6.6.4 Node return temperature 42 6.6.5 Node losses 43 6.6.6 Node input input energy (feeding circuit) . 43 6.6.7 Node mass flow rate . 43 6.7 Generation sub-system calculation 43 6.7.1 Heat generator dispatch sequence .

23、43 6.7.2 Generation sub-system operating conditions calculation . 45 6.7.3 Generation input calculation 45 6.8 Generation input per energy carrier and per service . 46 6.9 Auxiliary energy 46 6.9.1 Calculating the auxiliary energy of all sub systems . 46 6.9.2 Distribution rules auxiliary energy . 4

24、6 6.10 Recoverable system thermal losses . 47 6.10.1 Calculating the recoverable thermal losses of all sub systems 47 6.10.2 Distribution rules recoverable losses . 47 7 Energy efficiency indicators of space heating and domestic hot water systems or sub-systems 48 Annex A (normative) Template for th

25、e specification of application data . 49 Annex B (informative) Default application data 53 Annex C (informative) Heating circuit modules . 57 Annex D (normative) Generation circuits . 64 Annex E (informative) Bin method 65 Annex F (informative) Example 76 Bibliography . 84 PD CEN/TR 15316-6-1:2017CE

26、N/TR 15316-6-1:2017 (E) 4 European foreword This document (CEN/TR 15316-6-1:2017) has been prepared by Technical Committee CEN/TC 228 “Heating systems and water based cooling systems in buildings”, the secretariat of which is held by DIN. Attention is drawn to the possibility that some of the elemen

27、ts of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. PD CEN/TR 15316-6-1:2017CEN/TR 15

28、316-6-1:2017 (E) 5 Introduction The CENSE project, the discussions between CEN and the Concerted action highlighted the high page count of the entire package due to a lot of “textbook” information. This resulted in flooding and confusing the normative text. In order to facilitate the necessary overa

29、ll consistency and coherence, in terminology, approach, input/output relations and formats, for the whole set of EPB-standards, the following documents and tools are available: a) a document with basic principles to be followed in drafting EPB-standards: CEN/TS 16628:2014, Energy Performance of Buil

30、dings - Basic Principles for the set of EPB standards 1; b) a document with detailed technical rules to be followed in drafting EPB-standards; CEN/TS 16629:2014, Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards 2; c) the detailed technical rules are the basis f

31、or the following tools: 1) a common template for each EPB-standard, including specific drafting instructions for the relevant clauses; 2) a common template for each technical report that accompanies an EPB standard or a cluster of EPB standards, including specific drafting instructions for the relev

32、ant clauses; 3) a common template for the spreadsheet that accompanies each EPB standard, to demonstrate the correctness of the EPB calculation procedures. Each EPB-standards follows the basic principles and the detailed technical rules and relates to the overarching EPB-standard, prEN ISO 52000-1:2

33、015. One of the main purposes of the revision of the EPB-standards is to enable that laws and regulations directly refer to the EPB-standards and make compliance with them compulsory. This requires that the set of EPB-standards consists of a systematic, clear, comprehensive and unambiguous set of en

34、ergy performance procedures. The number of options provided is kept as low as possible, taking into account national and regional differences in climate, culture and building tradition, policy and legal frameworks (subsidiarity principle). For each option, an informative default option is provided (

35、Annex B). Rationale behind the EPB technical reports There is a risk that the purpose and limitations of the EPB standards will be misunderstood, unless the background and context to their contents and the thinking behind them is explained in some detail to readers of the standards. Consequently, va

36、rious types of informative contents are recorded and made available for users to properly understand, apply and nationally or regionally implement the EPB standards. If this explanation would have been attempted in the standards themselves, the result is likely to be confusing and cumbersome, especi

37、ally if the standards are implemented or referenced in national or regional building codes. Therefore each EPB standard is accompanied by an informative technical report, like this one, where all informative content is collected, to ensure a clear separation between normative and informative content

38、s (see CEN/TS 16629): - to avoid flooding and confusing the actual normative part with informative content, PD CEN/TR 15316-6-1:2017CEN/TR 15316-6-1:2017 (E) 6 - to reduce the page count of the actual standard, and - to facilitate understanding of the set of EPB standards. This was also one of the m

39、ain recommendations from the European CENSE project 1 that laid the foundation for the preparation of the set of EPB standards. Figure 1 shows the relative position of the related standard within the EPB package of standards and the position of all the other EPB standards under the responsibility of

40、 CEN/TC 228. Overarching Building (as such) Technical Building Systems DescriptionsDescriptionsDescriptionsHeatingCoolingVentilationHumidificationDehumidificationDomesticHot waterLightingBuildingautomationandcontrolElectricityproductionsub1 M1 sub1 M2 sub1 M3 M4 M5 M6 M7 M8 M9 M10 M11 1 General 1 Ge

41、neral 1 General EN153161EN1531612 Common terms and definitions; symbols, units and subscripts 2 Building Energy Needs 2 Needs EN 1283133 Applications 3 (Free) Indoor Conditions without Systems 3 Maximum Load and Power EN 128311EN 1283134 Ways to Express Energy Performance 4 Ways to Express Energy Pe

42、rformance 4 Ways to Express Energy Performance EN153161EN1531615 Building Functions and Building Boundaries 5 Heat Transfer by Transmission 5 Emission and control EN 153162EN 1531626 Building Occupancy and Operating Conditions 6 Heat Transfer by Infiltration and Ventilation 6 Distribution and contro

43、l EN 153163EN 153163EN 1531637 Aggregation of Energy Services and Energy Carriers 7 Internal Heat Gains 7 Storage and control EN 153165EN 153165EN 1531643PD CEN/TR 15316-6-1:2017CEN/TR 15316-6-1:2017 (E) 7 Overarching Building (as such) Technical Building Systems DescriptionsDescriptionsDescriptions

44、HeatingCoolingVentilationHumidificationDehumidificationDomesticHot waterLightingBuildingautomationandcontrolElectricityproductionsub1 M1 sub1 M2 sub1 M3 M4 M5 M6 M7 M8 M9 M10 M11 8 Building Partitioning 8 Solar Heat Gains 8 Generation 81 Combustion boilers EN1531641EN153164182 Heat pumps EN1531642EN

45、1531642EN153164283 Thermal solar Photovoltaics EN1531643EN1531643EN153164384 On-site cogeneration EN1531644EN1531644EN153164485 District heating and cooling EN1531645EN1531645EN1531645EN153164586 Direct electrical heater EN1531649EN153164987 Wind turbines EN1531641088 Radiant heating, stoves EN15316

46、48PD CEN/TR 15316-6-1:2017CEN/TR 15316-6-1:2017 (E) 8 Overarching Building (as such) Technical Building Systems DescriptionsDescriptionsDescriptionsHeatingCoolingVentilationHumidificationDehumidificationDomesticHot waterLightingBuildingautomationandcontrolElectricityproductionsub1 M1 sub1 M2 sub1 M3

47、 M4 M5 M6 M7 M8 M9 M10 M11 9 Calculated Energy Performance 9 Building Dynamics (thermal mass) 9 Load dispatching and operating conditions EN15316110 Measured Energy Performance 10 Measured Energy Performance 10 Measured Energy Performance EN 153783EN 15378311 Inspection 11 Inspection 11 Inspection E

48、N 153781EN 15378112 Ways to Express Indoor Comfort 12 12 BMS 13 External Environment Conditions 14 Economic Calculation EN154591Figure 1 Position of EN 15316-1 within the EPB set of standards Table 1 associates the title of the EN EPB standards to the numbers and modules. It also remembers the repla

49、ced standards. PD CEN/TR 15316-6-1:2017CEN/TR 15316-6-1:2017 (E) 9 Table 1 List of EN EPB standards related to the calculation of space heating and domestic hot water systems No. Module New EPBD numbering Old standards replaced Title of the new EPBD standard 1 M114 EN 154591 EN 15459 Heating systems and water based cooling systems in buildings Energy performance of buildings Part 1: Economic evaluation procedure for energy systems in buildings TR 15459