CEN TR 16823-2015 Railway applications - Driver-s cab - Background information on anthropometric data.pdf

1、BSI Standards PublicationRailway applications Drivers cab Background information on anthropometricdataPD CEN/TR 16823:2015National forewordThis Published Document is the UK implementation of CEN/TR 16823:2015. The UK participation in its preparation was entrusted by TechnicalCommittee RAE/4, Railway

2、 Applications - Rolling stock systems, to PanelRAE/4/-/4, Railway Applications - Drivers Cab.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible

3、for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 87248 8ICS 13.180; 45.060.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStanda

4、rds Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CEN/TR 16823:2015TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16823 December 2015 ICS 13.180; 45.060.10 English Version Railway applications - D

5、rivers cab - Background information on anthropometric data Applications ferroviaires - Cabines doprateur - Justification des donnes anthropometriques Bahnanwendungen - Fhrerraum - Hintergrundinformationen zu anthropometrischen Daten This Technical Report was approved by CEN on 21 March 2015. It has

6、been drawn up by the Technical Committee CEN/TC 256. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lith

7、uania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-

8、1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 16823:2015 EPD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 4 2 Terms and definitions . 4 3 Background on

9、 anthropometric data 4 3.1 Sources for current anthropometric data 4 3.2 Preconditions and principles applied . 5 3.3 Trend detected and consequences . 5 3.4 Impacts which are considered 6 3.5 Approaching a representative driver height 7 Bibliography 8 PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 3 Eur

10、opean foreword This document (CEN/TR 16823:2015) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENEL

11、EC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 4 Introduction This document has been used as a b

12、asis for deriving the requirements related to anthropometric data used in the EN 16186 series 5. The following principles have been applied for the purposes of this document: Principle 1: Every identified trend has the same direction in all member states. The direction of a trend could be upwards or

13、 downwards. An example for an upward trend would be changes in body height. Principle 2: All trends take place at the same time in all member states. Principle 3: The impact of every trend is different. Impacts can be treated like a vector. Principle 4: Using the average of body height of the Europe

14、an population does not create the height of the average European driver. 1 Scope This Technical Report describes the background on the anthropometric data provided by EN 16186-1 1. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 driver person

15、 tasked with operating a vehicle or a train by operating controls in a drivers cab or on a remote control unit 2.2 drivers cab compartment of a vehicle which is equipped with controls and instruments with which the driver controls traction units in the train 3 Background on anthropometric data 3.1 S

16、ources for current anthropometric data European database: PeopleSize Database 2; EN ISO 15537 3; recent representative European customer specifications; UIC 651 4. NOTE It has been proven that anthropometric data provided by UIC 651 are more representative for northern than for southern European pop

17、ulations. PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 5 3.2 Preconditions and principles applied The analysis of the sources mentioned in 3.1 has shown that a number of common parameters exist. The following preconditions apply: a) if a trend is discovered, it is deemed to apply for all European membe

18、r states in tendency and timing; b) trends pointing in different directions are combined and substituted by a resulting common trend; c) the average body height of the weighted European population is not sufficient for determining a future range of driver sizes for Europe; d) missing data about east

19、ern European drivers are substituted by the average between northern and southern populations; e) a very common approach for body height (automobile, aviation, clothing industry) takes into consideration: 1) the 5 % percentile European female, and 2) the 95 % percentile European male, see Figure 1 a

20、nd Figure 3. Key X population percentile Y body height, in mm indicative, age range 18 to 25 (male) Figure 1 Impact of the percentile on the body height 3.3 Trend detected and consequences Body height is shown to be generally higher in northern Europe compared to southern Europe (Figure 2). NOTE 1 D

21、ue to human nutrition and medical research there is an assumed trend of increasing body height by approximately 1 mm p.a. This trend is now assumed to have slowed down or even stopped. NOTE 2 To account for future changes of body sizes, the average size of people aged 18 years to 39 years is conside

22、red to be more representative than that of people aged 18 years to 64 years (Figure 3). PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 6 Key X member state 1 Sweden 4 Italy (corrective) Y body height, in mm 2 Germany 5 Italy (age range 18 to 83) age range 18 to 64 (5 % female) 3 United Kingdom Figure 2 N

23、orthsouth divide Key X age groups (ranges) typical min. (5 % female) Y body height, in mm typical max. (95 % male) Figure 3 Indicative age groups and their body heights 3.4 Impacts which are considered Impact on height: the impact of every trend is different; the male and female population are getti

24、ng taller year by year; the higher the percentile value used, the taller the people that will need to be considered. PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 7 3.5 Approaching a representative driver height Step 1: Validation: Deciding on a Representative European average (see Figure 4). Step 2: Fi

25、x the future option means: Implementation of proposed options (see Figure 4). Result: Consensus 1 550 mm to 1 910 mm: Key X representative European average database Representative European average Y body height, in mm 1 consensus 5 % European female increase due to future evolution (for women no inc

26、rease is considered) 2 typical min. (5 % European female) data cohort 18 to 60 and 18 to 35 3 consensus 95 % European male additional for actuality of 10 years old database 4 typical max. (95 % European male) NOTE Column 1 is explained by Column 2, and Column 3 is explained by Column 4. Figure 4 Der

27、ivation of the 1 550 mm to 1 910 mm height range PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 8 Bibliography 1 EN 16186-1, Railway applications - Drivers cab - Part 1: Anthropometric data and visibility 2 European official data base: PeopleSize 2008 Professional, Version 1.10, Open Ergonomics Ltd., 3

28、EN ISO 15537, Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537) 4 UIC 651:2002, Layout of drivers cabs in locomotives, railcars, multiple-unit trains and driving trailers 5 EN 16186 (all parts), Railway applications Driv

29、ers cab PD CEN/TR 16823:2015This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are publishe

30、d by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The k

31、nowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge

32、that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international

33、standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make

34、using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always b

35、e up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automati

36、cally receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can

37、cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality

38、of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the pr

39、operty of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents

40、 Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW