CGSB 34 18-94-CAN CGSB-1994 Plaques D-Amiante De Faible Masse Volumique《低密度石棉板 代替34-GP-18M》.pdf

1、Canadian General Standards Board CAN/CGSB-34.18-94 Supersedes 34-GP- 18M I Low Density Asbestos Sheets National Standard of Canada Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - _

2、 ._ CGSB CANTCGSB- 34-18-74 tt IL74650 0025274 466 9 The CANADAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed is a government agency within the Federal Department of Supply and Services. CGSB is engaged in the production of voluntary standards in a wide range

3、 of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educationd institutions, technicd, professional and trade soci

4、eties, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives. The Ministers Advisory Council on CGSB reviews the results of the consensus process. CGSB has been accredited by the Standards Council of Canada as a national s

5、tandards-writing organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, CGSB produces standards to mee

6、t particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and national standards developed by CGSB are developed in conformance with the policies described in the Policy Manual for the Development and Maintenance of Standards by

7、 CGSB. CGSB standards are subject to review and revision at any time, so as to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued

8、either as separate amendnient sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, will be found in the CGSB Catalogue, which is published annually and is available without charge upon request.

9、Although the ititended primary application of this standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpse. Many tests required by CGSB standards are inherently hazardous. CGSB neith

10、er assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever perforiied CGSB takes no position respecting the validity of any patent rights asserted with any item connected with this standard. Users of this standard are expressly advise

11、d that determination of the validity of any such patent rights are entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Manager Marketing and Sales Services Canadian General Standards Board Ottawa, Canada KIA 1G6 The STANDARDS COUNCI

12、L OF CANADA is the co-ordinating body of the National Standards System, a federation of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objectives of the Council are to foster and promo

13、te voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international co-operation in the field of standards. A National St

14、andard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of producers,

15、 users, consumers and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard that is capable of making a significant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard co

16、nforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards-writing organization. Those who have a need to apply standards are encouraged

17、 to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The responsibility for approving National Standards of Canada rests with the: , Standar

18、ds Council of Canada 45 OConnor Street Suite 1200 Ottawa, Ontario K1P 6N7 How i to order by Telephone by Fax by Mail in Person Publications: - (613) 941-8703 or (Canada only) - 1-800-665-CGSB - (613) 941-8705 - CGSB Sales Centre Ottawa, Canada K1A 1G6 - Suite 1402 222 Queen Street Ottawa, Ontario Co

19、pyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- -. - CGSB CAN/CGSB- 1874650 0025275 3T2 m NATIONAL STANDARD OF CANADA CANICGSB-34.18-94 Supersedes 34-GP- 18M August 1977 i LOW DENSITY

20、ASBESTOS SHEETS Prepared by the Canadian General Standards Board CKs Approved by the Standards Council of Cariada Published May 1994 by the Caiiadiari General Standards Board Ottawa, Canada KIA 1G6 QMiiiister of Supply and Seivices Cniiuda - 199-1 No prt of this publicatioti miiy be reproduced iii a

21、iiy forni witliout lie prior perniissioii of the publislier. Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CANADIAN GENERAL STANDARDS BOARD COMMITTEE ON ASBESTOS-CEMENT PRODUCTS Bro

22、wiisteiii, M. Cossette, M. Douglas. E. laoclie. P. Medi. M.N. L)ctrcicli, F. Reiiiedios, S. Robertsoii. J.S. Ruclclick, J. Charest. R. Sccrefary Departinent of Consunier and Corporate Affairs CERAh4 - SNA Inc. Department of Energy, Mines and Resources Lab Chrysotile Inc. Departinent of National Defe

23、nce Department of Public Works Canadian Standards Association Ministry of Municipal Affairs, British Columbia Department of National Health and Welfare Caiiadiaii General Staiidards Board CA NICGSU-34.18-94 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for Res

24、aleNo reproduction or networking permitted without license from IHS-,-,-CGSB CANICGSB- 34-38-94 * m 18746.50 0025277 L75 m 1. 1.1 1.2 1.3 2. 2. I 2.1.1 2.2 3. 3. I 3.2 3.3 3.4 3.5 CAN/CGSB-34.18-94 Supersedes 34-GP- 18M August 1977 CANADIAN GENERAL STANDARDS BOARD LOW DENSITY ASBESTOS SHEETS SCOPE T

25、his standard applies to flat low density asbestos sheets intended primarily for interior use, composed of a uniform mixture of asbestos fibres, with suitable inorganic binding agents and fillers, all the components being substantially insoluble in water. For caulionary notes on the cutting, sanding

26、or drilling of this product, see par. 3.5 and 7.3. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this stan

27、dard has the responsibility to consult the appropriate authorities and to establish appropiate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use. AIPLICAULE PUBLICATIONS Tlie following publications are applicable to this standard: Aiiicr

28、icaii Society for Testing aiid Materials (ASTM) C I77 - Test Method for Sleady-State Heat Flux Measurements and Tliermal Transmission Properties by Means of the Guarded-tiot-Plate Apparatus C 459 - Methods of Sampling and Testing Asbestos-Cement Flat Sheets, Roofiiig and Siding Shingles, and CI ap b

29、oards. ielerence to the above publications is to the latest issues, unless otherwise specified by the authority applying this standard. The source of these publications is shown in the Noles section. GIINEKAL REQUIREMENTS Ihe sheets shall be composed of a uniform mixture o asbestos fibre with suitab

30、le inorganic binding agents. They shall have a uniform smooth or quilted surface on at least one side and shall be free from defects that detract from their appearance and serviceability. Tlic sheets shall be c:ipable of receiving and inaiiiitcliriiiig serviceable interior paiiit systems. lie sheets

31、 shall be free from any objectionable odour when wet or dry. Ilciit Hesistaiice - Specimens of the sheets shall show no signs of explosive cracking, spalliiig or any other form of disintegration. Caiitioiiary Stateiiient - Ench package and each sheet of non-packaged products shall be clearly aiid in

32、delibly inai-ked, in both oficial languages, with the following statement: ASBESIOS-CEMENT. DO NOT DRY CUT AT HIGH SPEED WITHOUT DUST SUCTION TOOLS. TAKE ALI, NECESSARY PRECAUTIONS. AMIANTE-CIMEN?: NE PAS COUPER h GRANDE VIIESSE LE MATERIEL SEC SANS UN SYSTEME DASPIRATION DE LA POUSSLERE. PRENDRE TO

33、UTES LES PKCAUTIONS NECESSAIRES. 1 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-4. 4.1 4.1.1 4.1.2 - 4.2 4.3 Mitiiinuin Average Breaking Load N 60 120 280 480 4.4 4.5 4.5. I 4.5.2

34、4.6 _ CGSB CANKGS- 34.18-94 1874b50 002527 half-size sheets, 600 X 2400 and GOO X 3000 min, are available if required. The length atid width of the sheets shall not vary from the nominal specified values by more tliaii rt3 iiirn for all sizes. Tliickiiess - The thickness of the sheets shall be as sp

35、ecified (par. 7.1) and sliall conform to lhe values giveii iii Table 1. TABLE 1 Sheet Thickness Tolerance Noininal Thickness inm mm r10.5 tandard: a. Lmigth aiid width of slieets (par. 4.1.1) b. iliickiiess of sheets (par. 4.1.2) c. Packaging. labelling, packing and iiiarking details, if iioriiial c

36、oininercial practice is not suitable (par. 5.1 j. (Note: Ir i.r imporrairt that pacll-cgitig iiisfritioiis be as specific aiid clear as possible.) Storage - Atteiitioii is drawti to tbe iiiiportaiice of exercising care iii tlie storage of asbestos-cernent flat sheets to preveiit tlatiiage aiid to pr

37、ovide protection froin the weather. Sheets should be piled o11 firiii supports that will keep tlieiii levei aiid flat. ky should be piled with edges square arid Ilush, atid covered to iniiiiinize exposure to the wentlicr until used. C:iiitioiiary Note - Precautioiiary iiieasurcs slioulrl be takeii t

38、o eliiiiiiiate eniissioiis of respirable dust during cuttiiig. saiidiiig or drilliiig of asbestos-ceineiit products. Avoid high speed diy cuttiiig. saiidiiig ur drilling witliout dust suction tools. Souice of Kefereiiced Pubiicatioiis - The publications referred to iii par. 2.1.1 may he obtained fro

39、iii tlie Aincricaii Society for Testing atid Materials, 1916 Race Street. Philadelpliia. PA 19103. U.S.A. . or photocopies are available from the Canadiati General Standards Board, Sales Centre! Ottawa, Canada KI A 1GG. Telephone (6 13) 941-X703 or 1-800-665-CGSB (Canada oiilyj. Fax (613) 941-8705. CANKGSII-34.18-94 3 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-