1、CGSB CAN/CGSB- 48-20-94 * 1874650 0024825 375 CAN/ CGSB-48.20-94 Canadian General Standards Board Certification of Nondestructive Testing Personnel (Police and Security Radiography Method) e National Standard of Canada Copyright Canadian General Standards Board Provided by IHS under license with CGS
2、BNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 48.20-94 * 1874650 0024826 201 M The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed is a government agency within the Federal Department of Supply and Se
3、rvices. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retail
4、ers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives. The Ministers Advisory Council on CGSB reviews the results of the consensus pr
5、ocess. CGSB has been accredited by the Standards Council of Canada as a national standards-writing organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In additi
6、on to standards it publishes as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and national standards developed by CGSB are developed in conformance with the policies
7、described in the Policy Manual for the Development and Maintenance of Standards by CGSB. CGSB standards are subject to review and revision at any time, so as to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome, should be brought to
8、the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, will be found in the CGSB Cata
9、logue, which is published annually and is available without charge upon request. Although the intended primary application of this standard is stated in its Scope, it is, important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular p
10、urpose. Many tests required by CGSB standards are inherently hazardous. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. CGSB takes no position respecting the validity of any patent rights asserted with
11、any item connected with this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights are entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Manager Marketing and Sales Ser
12、vices Canadian General Standards Board Ottawa, Canada K1A 1G6 The STANDARDS COUNCIL OF CANADA is the co-ordinathg body of the National Standards System, a federation of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the n
13、ational interest. The principal objectives of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, a
14、nd furthering intemational co-operation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provid
15、e, to the greatest practicable extent, a balance of representation of producers, users, consumers and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard that is capable of making a significant and timely contribution to the national interest. Appr
16、oval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standar
17、ds-writing organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The res
18、ponsibility for approving National Standards of Canada rests with the: Standards Council of Canada 45 OConnor Street suite 1200 Ottawa, Ontano K1P 6N7 3ow to order Publications: by Telephone - (613) 941-8703 or - 1-800-665-CGSB (Canada only) by Fax - (613) 941-8705 by Mail - CGSB Sales Centre Ottawa
19、, Canada K1A 1G6 in Person - Suite 1402 222 Queen Street Ottawa, Ontario e a Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CANICGSB- 48=20-94 * 1874650 0024827 148 NATIONAL STA
20、NDARD OF CANADA CANKGSB-48.20-94 CERTIFICATION OF NONDESTRUCTIW TESTING PERSONNEL (POLICE AND SECURITY RADIOGRAPHY METHOD) Prepared Canadian by the Approved by the General Standards Board ss Standards Council of Canada Q Published May 1994 by the Canadian General Standards Board Ottawa, Canada K1A 1
21、G6 Minister of Supply and Senices Canada - 1994 No part of this publication may be reproduced in any form without the prior permission of the publisher. Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without lic
22、ense from IHS-,-,-CGSB CAN/CGSB- 48-20-94 * m 1874650 0024828 084 m CANADIAN GENERAL STANDARDS BOARD COMMITTEE ON CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL (Membership at date of approval) DeWalle, S. Chairperson Bagley, W. Boone, L. Boos, Cpl S. Bradley, R. Brassard, Maj M. Brown, R. Brytak
23、, A. caco, V.S. Chapman, H. Coates, A. Cochrane, Ssgt. D.W. Dawson, S. Dudley, M. Dziub, G. Fife, P. Finnerty, D. Fiorito, G. Fleck, C. Fraser, H. Ginzel, E. Goszczynski, J. Harding, N.G. Harris, J. Havercroft, W. Hazzi, S. Heath, D. Higgins, A.F. Hodgkinson, D. Jacklin, Sgt D. Kennedy, W. Konikow,
24、C. Labbe, G.R. Levesque, Y. MacGillvray, G. - Marshall, D. Canadian N.D.E. Technology Ltd. Ingersoll-Rand Canada Inc. Department of National Defence Royal Canadian Mounted Police Department of National Health and Welfare Department of National Defence Atomic Energy Control Board Air Ontario Atomic E
25、nergy of Canada Ltd. Consultant Des Escher Wyss Royal Canadian Mounted Police Consultant Aerocom Inspection Services Ltd. Canadair Ltd. Aries Inspection Services Ltd. Canadian Component Services Coilege Ahuntsic NDE Institute of Canada Atlas Testing Labs & Services (Nova Scotia) Ltd. Ginzel Brothers
26、 and Associates Atomic Energy of Canada Ltd. Namron and Associates Royal Canadian Mounted Police Consultant AGFA Canada Inc. Heathair International Inc. Inco Ltd. Nova, An Alberta Corporation Canadian Police College Canadian Welding Bureau Du Pont Canada Inc. Department of National Defence Alcan Int
27、ernational Ltd. Atomic Energy of Canada Ltd. Dofasco Inc. Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 48=20-94 * 1874650 0024829 TL0 m Martin, D.G. Ontario Hydro Ma
28、tthews, J.R. Mazurek, G. McCallum, D.M. McCray, Maj A. McIntyre, D. Meleskie, K. Metcalf, B. Munro, B. Newbury, J. Nixon, G. Pfeiffer, F. Popenko, G. Reid, J. Russell, K. Schmierer, B. Schnubb, P. Seshadri, K. Sieben, G. Smith, G. Stasuk, D.G. Szpakowski, E. Szucs, J.R. Tonon, J. Tremblay, S.Y. Woit
29、, B. Zinihelt, J.H. Sargent, J. Secretary Department of National Defence Consultant Horton CBI, Ltd. Department of National Defence Babcock & Wilcox Consultant Ardrox Ltd. Atlas Testing Labs and Services (Oakville) Ltd. Department of Energy, Mines and Resources Southern Alberta Institute of Technolo
30、gy Canadian Airlines International Consultant Industrial Nondestructive Testing Petro-Canada Brian Schmierer NDT Consulting Ltd. Bradley Air Services Ltd. Sir Sanford Fleming College NDT Management Association Execaire Inc. Stasuk Testing & Inspection Ltd. Department of Transport Air Canada Algoma S
31、teel Corporation Ltd. Services Techniques St Inc. Canspec Group inc. Charcas International Inc. Canadian General Standards Board Acknowledgment is made for the translation of this National Standard of Canada by the Translation Bureau of the Deparnent of the Secretary of State. Copyright Canadian Gen
32、eral Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 48-20-94 * 1874650 0024830 732 W 2 . 3 . 4 . 5 . 6 . 7 . APPENDIX A APPENDIX B APPENDIX C APPENDIX D APPENDIX El APPENDIX E2 APPENDIX F CANKGS
33、B-48.20-94 Table of Contents SCOPE. TERMINOLOGY CLASSIFICATION OF PERSONNEL ELIGIBILITY FOR EXAMINATION EXAMINATIONS . RENEWAL OF CERTIFICATION . RECERTIFICATION . TRAINING COURSE REQUIREMENTS FOR LEVEL 1 AND LEVEL 2 . GENERAL . RECOMMENDED TRAINING COURSE GUIDELINES GUIDE TO THE PREPARATION OF PRAC
34、TICAL TESTS FOR THE CERTIFICATION OF LEVEL 1 AND/OR LEVEL 2 POLICE AND SECURITY PERSONNEL . , “ RECOMMENDED TRAINING REFERENCES TYPICAL CERTIFICATION EXAMINATION QUESTIONS - POLICE AND SECURITY RADIOGRAPHY - LEVEL 1 TYPICAL CERTIFICATION EXAMINATION QUESTIONS - POLICE AND SECURITY RADIOGRAPHY - LEVE
35、L 2 . A . GENERAL KNOWLEDGE . “ B . RADIATION SAFETY C . FILM PROCESSING . . “ u . “ . GUIDELINES TO THE PREPARATION OF JOB SPECIFIC EXAMINATIONS BY THE EMPLOYER WHEN REQUIRED FOR SPECIFIC POLICE AND SECURITY APPLICATIONS . . “ Page 1 1 2 3 4 5 5 Al B1 c1 D1 e1-1 E2-1 E2-1 E2-7 E2-9 F1 Copyright Can
36、adian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1. 1.1 1.2 1.3 1.4 1.5 1.6 1.7 2. 2.1 CGSB CANICGSB- 48.20-74 * = 1874650 0024833 679 CANKGSB-48.20-94 CANADIAN GENERAL STANDARDS BOARD CERTIFICATIO
37、N OF NONDESTRUCTIVE TESTING PERSONNEL (POLICE AND SECURITY RADIOGRAPHY METHOD) SCOPE This standard provides recommended course guidelines for the minimum essential training of, and a procedure for the certification of two levels of personnel to perform police and security radiography. This standard
38、covers only those radiographic testing procedures and techniques in which training has been provided in accordance with the course requirements and guidelines established in Appendix A and Appendix B. Certification to this standard shall provide recognition of the qualifications and competence of an
39、 individual to perform basic radiography using low energy portable equipment and advanced radiography using a full range of radiography equipment. This certification procedure does not of necessity cover radiographic testing procedures and techniques required for specific situations. Organizations a
40、nd agencies making use of this standard shall determine that personnel performing radiographic testing procedures and techniques required for specific situations are further trained and qualified to meet the additional requirements as outlined in Appendix F before they perform police radiographic no
41、ndesmctive testing in such specific situations. The standard provides for the testing and qualifying of personnel in the general aspects of radiation hazard control in radiography. It does not qualis. the individual in the safe handling of specific devices or in the safe operation of specialized pro
42、cedures. Organizations making use of this standard shall ensure that personnel are familiar with relevant equipment and are qualified to work safely with this equipment. Organizations and personnel making use of this standard shall comply with such requirements of the relevant regulatory authorities
43、 as may apply, i.e. Atomic Energy Control Board, Federal or Provincial Health Authorities, etc. This standard may require the use of materials andor equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard
44、 has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use. TERMLNOLOGY Terms included in this standard are defined as follows: Approved Training Establis
45、hment (tablissement de formation approuve) An agency that conducts the training and examination of an applicant for certification. Certification (Accrditation) The proceduies leading to a written testimony of the qualification of an individuals competence in an NDT method. Certifying Agency (Organis
46、me d accrditation) A national agency that administers the certification of personnel according to the requirements of this standard. Experience (Exprience) Period of time spent in performance of NDT work NDT Method (Mthode END) The discipline associated with applying a physical testing). which contr
47、ibutes to qualification. principle in nondestructive testing (for example, radiographic 1 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CANICGSB- 48*20-94 * L874b50 0024832 505
48、 NDT Procedure (Mode opratoire END) An orderly sequence of instructions which describes in detailed terms where, how and in which sequence an NDT method should be applied to a product. NDT Technique (Technique END) A specific application of an NDT procedure (for example, police radiographic testing)
49、. Qualification (Qualification) A demonstration of the knowledge, skill, training and experience required to properly perform NDT tasks. 3. CLASSIFICATION OF PERSONNEL 3.1 For purposes of this standard, police and security radiographic personnel are classified as trainees, Level 1 and Level 2, according to the following definitions: 3.1.1 Radiography Trainees - Radiography trainees (hereafter simply “trainees
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1