CGSB 49 14-M78-CAN CGSB-1978 Undershirts Knitted Crew-Neck T-Shirt and Button Closure Styles Little Boys- and Boys- Regular Range - Dimensions Amendment 1 November 1983《男童与男生纽扣封口式水.pdf

1、CGSB CAN/CGSB- 49=34-M78 * li874650 0006355 714 CANADIAN GENERAL STANDARDS BOARD Standard for UNDERSHIRTS, KNITTED, CREW-NECK, T-SHIRT AND BUTTON CLOSURE STYLES, REGULAR RANGE - DIMENSIONS LITTLE BOYS AND BOYS, 2. APPLICABLE PUBLICATION Change this Section to read: 2. APPLICABLE PUBLICATIONS 2.1 The

2、 following publications are applic- able to this standard: 2.1.1 Canadian General Standards Board (CCSB) CAN2-49.64 - Application of the Canada Standard System for the Sizing of Girls and Boys Apparel 2.1.2 American Society for Testing and Materials (ASTM) 2.2 D 2594 - Stretch Properties of Knitted

3、Fabrics Having Low Power. Reference to the above publications is to the latest issue unless otherwise specified by the authority applying this standard. The sources of these publications are shown in the Notes section. CAN2-69.14478 AMENDMENT NO. 1 MODIFICATIF NO 1 November/Novembre 1983 OFFICE DES

4、NORMES GENERALES DU CANADA Norme GILETS DE CORPS EN TRICOT, MODELES RAS-DE-COU, A GARONNETS ET GARONS, TAILLES BOUTONNAGE ET DE STYLE T-SHIRT, COURANTES - DIMENSIONNELLE PUBLICATION APPLICABLE La prsente section doit se lire comme suit: PUBLICATIONS APPLICABLES Les publications suivantes sappliquent

5、 ia prsente norme: Office des normes gnrales du Canada (ONGC) CAN2-49.6-M - Application du systme de Tailles Canada Standard des vete- rnents pour filles et garons American Society for Testing and Materials (ASTM) D 2594 - Stretch for Properties of Knitted Fabrics Having Low Power Sauf indication co

6、ntraire de lautorit appliquant ia prsente norme, ces publications sentendent de ldition la plus rcente. La source de diffusion est indique dans la section intitule Remar ques. 1 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or network

7、ing permitted without license from IHS-,-,-CGSB CANICGSB- 47*14-M78 * 1874650 000b15b 650 3. 3.1 CLASSIFICATION Change this paragraph to read: For the purpose of this standard fabrics are classified by their stretch capability. Fabric Type Stretch in Horizontal Direction of Garment Type A less than

8、30% Type c greater than 80% Type 3 30% - 80% Fabric stretch shall be tested accord- ing to the Apparatus and Procedure in ASTM D 2594. However, the Preparation of Specimens shall be modified as follows. From the garment to be tested cut five specimens 127 2 3 mm by 393 8 mm so that the long dimensio

9、n is parallel to the horizontal direction of the intended wear position. After cutting, prepare the specimens according to the ASTM D 2594 proce- dure and then determine the stretch percentages under a load of 10 g/mm width of fabric specimen. If insufficient material is available for specimens from

10、 a single garment, specimens may be cut from fabric of the same type and with the same characteristics and properties as the garinent(s) to be tested. When using such supplementary material, first determine whether the fabric of the garment(s) has the courses or the wales parallel to the horizontal

11、direction of the intended wear position, and then cut the test specimens with their long dimension parallel to that direction. CLASSIFICATION Modifier le prsent paragraphe comme suit: Aux fins de la prsente norme, les tissus sont classs selon leur extensibilit. Type de tissu Extensibilit dans le sen

12、s horizontal du vtement Type A moins de 30% Type B 30% 80% Type c plus de 80% Lextensibilit du tissu doit tre vrifie laide de lappareillage et du mode opratoire indiqus dans D 2594 de 1ASTM. Toutefois, la prparation des spcimens doit tre modifie comme suit. Tailler cinq spcimens mesurant 127 Z 3 mm

13、par 393 2 8 mm du vtement lessai de faon que leur longueur soit parallle au sens horizontal du vtement iorsquii est en position prt porter. Une fois quils sont taills, prparer les spcimens conformment au mode opratoire de D 2594 de IASTM et dterminer le pourcentage dextensibilit sous une charge quiv

14、alente 10 g/mm de largeur de spcimen. Si un seul vtement ne suffit pas fournir les spcimens requis, on peut en obtenir dun autre tissu du mme type prsentant les mmes caractristiques et les mmes proprits que le vtement lessai. Lorsqulon utilise un tissu supplmentaire, il faut dabord vrifier si les ra

15、nges ou les colonnes de mailles du tissu sont parallles au sens horizontal du vtement en position prt porter avant de tailler les spcimens de faon que leur longueur soit parallle au sens horizontal. CAN2-49.14478 2 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot

16、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 44-L4-“78 * 1879650 000bL.57 577 8. 5.2 NOTES Change this paragraph to read: The publication referred to in par. 2.1.1 is obtainable from the Canadian Government Publishing Centre, Supply and Services Cana

17、da, Ottawa, Canada KIA OS9. Telephone (819) 997-2560 A b I 1 i 8.3 Add the following paragraph: The publication referred to in par. 2.1.2 is obtainable from the American Society for Testing and ,Materials, 1916 Race Street, Philadelphia, PA 19103, U.S.A. TABLE 1 Under CSS SIZE CODES, delete the colu

18、mn headed “Combination Sizes“. At the bottom of the page, delete the NOTE, including all four of its sentences. TABLE 2 Under GARMENT MEASUREMENTS, MINIMUM, in the column headed “Sleeve Length, Long Sleeve (Center of Neck)ll, opposite sizes: 2, 3, 4, 5, 6, 6X, 8, 10, 12, 14, 16, 18, 20, change the d

19、imensions to read: “39, 42.5, 46, 49, 53, 54.5, 58.5, 64.5, 70, 74, 76.5, 79, 81“. Under GARMENT MEASUREMENTS, RECOILIMENDED, in the column headed “Sleeve Length Short Sleeve, (Center of Neck)“, opposite sizes: 2, 3, 4, 5, 6, 6X, 8, 10, 12, 14, 16, 18, 20, change the dimensions to read: “18, 19.5, 2

20、1, 22, 23.5, 24, 26, 28.5, 30.5, 32, 33, 34, 34.5“. REMARQUES Modifier le prsent paragraphe comme suit: La publication mentionne Yal. 2.1.1 est diffuse par le Centre ddition du gouvernement du Canada, Approvisionnements et Services Canada, Ottawa, Canada K 1 A OS9. Tlphone (8 19) 997-2560. Ajouter l

21、e paragraphe suivant: La publication mentionne Pal. 2.1.2 est diffuse par IAmerican Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103, U.S.A. TABLEAU 1 Sous la rubrique CODES DE TAILLES TCS, supprimer la colonne intitule “Tail les gr oupesll. Supprimer la remarque au bas de

22、 la page y compris les quatre phrases qui la composent. TABLEAU 2 Sous la rubrique MESURES DU VETEMENT, MINIMALES, dans la colonne intitule “Longueur de manche longue, (milieu de lencolure), remplacer les mesures correspondant aux tailles 2, 3, 4, 5, 6, 6X, 8, IO, 12, 14, 16, 18, 20 par les mesures

23、suivantes: “39, 42.5, 46, 49, 53, 54.5, 58.5, 64.5, 70, 74, 76.5, 79, 8 l!. Sous la rubrique MESURES DU VETEMENT, RECOMMANDES, dans la colonne intitule “Longueur de manche courte (milieu de lencolure)“, remplacer les mesures correspondant aux tailles 2, 3, 4, 5, 6, 6X, 8, 10, 12, 14, 16, 18, 20 par

24、les mesures suivantes: “18, 19.5, 21, 22, 23.5, 24, 26, 28.5, 30.5, 32, 33, 34, 34.5“. All dimensions are in centimetres. CANZ-49.14478 Toutes les mesures sont en centimtres. 3 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networki

25、ng permitted without license from IHS-,-,-CGSB CAN/CGSB- 49.34-fl78 Sf 1874650 000b158 Y23 NAT I O N AL STANDARD OF CANADA I , Undershirts, Knitted, Crew- Neck, T-Shirt and Button Closure Styles, Little Boys and Boys, Regular Range - 4 Dimensions NORME NATI O NALE DU CANADA Gilets de corps en tricot

26、, modles ras- de-cou, boutonnage et de style T-shirt, garonnets et garons, ta I les courantes - dimension- nelle Canadian General Standards Board CGcS Office des normes gnrales du Canada oGC CAN2-49.14-M78 Supersedes/Remplace CAN2-49.14-76 e Copyright Canadian General Standards Board Provided by IHS

27、 under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 49.14-M * 187Yb50 000b159 3bT This standard has been developed by the CANADIAN GENERAL STANDARDS BOARD (CGSB) for the application stated in the Scope clause. The user of this sta

28、ndard is responsible for judging its suitability for his particular purpose or application. The Canadian General Standards Board develops voluntary standards through standards committees and the consensus process. All relevant interests are invited to be represented on the standards committees, incl

29、uding producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies and research and testing organizations. CGSB is recognized by the Standards Council of Canada as a national standards-writing organization. CGSB produces standard

30、s to meet particular needs in response to requests from both the public and the private sectors. CGSB standards are subject to periodic review to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome, are brought to the notice of the sta

31、ndards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of the standards. Further information on CGSB and its services and standards may be obtained from: Canadian General Standards Board Ottawa, Canada KIA 1G6 The STANDARDS COUNCIL OF CANA

32、DA is the co-ordinating body of the National Standards System, a federation of independent, aute nomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objects of the Council are to foster and promotevoluntary

33、 standardization as a means of advancing the national economy, benefiting the health. safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international co-operation in the field of standards. A National Standard of Ca

34、nada is a standard that has been approved by the Standards Council of Canada and one that reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide to the greatest practicable extent a balance of representation of producers, users, consumer

35、sand others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard that is capable of making a significant and timely contribu- tion to the national interest Approval by the Standards Council of Canada indicates that a standard conforms to the criteria and p

36、rocedures established by the Council. Approval does not indicate that a review of the technical content of the standard has been made by the Council; this remains the continuing responsibility of the accredited standards-writing organization. Those who have a need to apply standards are encouraged t

37、o use National Standards of Canada whenever practicable, These standards are subject to periodic review; therefore, usen are cautioned to obtain the latest edition from the organization preparing the standard. National Standards of Canada are approved by the Standards Council of Canada 350 Sparks St

38、reet Ottawa, Ontario K1R 7S8 La prsente norme dont lapplication est prcise , Ia!ina intitul Objet, a t labore par lOFFICE DES NORMES GENERALES DU CANADA (ONGC). Lusager de cette norme doit dcider si elle peut servir ses fins. LOffice des normes gnrales du Canada rdige des normes facultatives laide d

39、e comits des normes qui se prononcent la majorit des voix. Tous les groupes intresss aux normes a ltude, notamment les fabri- cants, les consommateurs et autres usagers, les dtaillants, les gouverne- ments, les institutions denseignement, les associations techniques, professionnelles et commerciales

40、. ainsi que les organismes de recherche et dessai sont invits faire partie des comits des normes. LONGC est reconnue par le Conseil canadien des normes B titre dorganisme rdac- teur de normes nationales. LONGC rdige galement des normes visant des besoins particuliers, la demande tant du secteur priv

41、 que du secteur public. tant donn lvolution technique, les normes de IONGC font lobjet de rvisions priodiques. Toutes les suggestions susceptibles den amliorer la teneur sont accueillies avec grand intrt et portes lattention des comits des normes concerns. Les changements appor- ts aux normes sont p

42、ublis sous la forme de modificatifs, distincts, ou incorpors dans les nouvelles ditions des normes. Pour de plus amples renseignements sur IONGC, ses services et ses normes, sadresser : LOffice des normes gnrales du Canada Ottawa, Canada K1A 1G6 Le CONSEIL CANADIEN DES NORMES est lorganisme de coord

43、ina tion du Systme de normes nationales, une fdration dorganismes indpendants et autonomes qui travaillent au dveloppement et lamlioration de la normalisation volontaire dans lintrt national. Les principaix buts du Conseil sont dencourager et de promouvoir la normalisation volontaire comme moyen dam

44、liorer lconomie nationale, damliorer la sant, la scurit et le bien-tre du public, daider et de protger le consommateur, de faciliter le commerce national et international et de favoriser la coopration internationale dans le domaine de la normalisation. Une Norme nationale du Canada est une norme, ap

45、prouve par le Conseil canadien des normes, qui reflete une entente raisonnable parmi les points de vue dun certain nombre de personnes comptentes dont les intb cest pourquoi il est recm- mand aux utilisateurs de se procurer ldition la plus rcente de la norme auprs de lorganisme qui la prpare. Les No

46、rmes nationales du Canada sont approuves par le Conseil canadien des normes 350, rue Sparks Ottawa, Ontario K1R 7S8 t Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CANICGSB- 49

47、*14-M78 * U 1874650 000bLb0 OB1 9 CAN2-49.14-M78 S upersedesl R em pl ace CAN2-49.14-76 NATIONAL STANDARD OF CANADA UNDERSHIRTS, KNITTED, CR EW-NECK, T-SHIRT AND BUTTON CLOSURE STY LES, LITTLE BOYS AND BOYS, REGULAR RANGE - DIMENSIONS This standard is expressed in SI (Metric) units in response to th

48、e requirements of Canadas metric conversion program. By agreement with the Com- mittee on Standardization of Garment Sizes, it supersedes CAN2-49.14-76 which expressed the re- quirements in yard/pound units. Prepared by I e Specifications Board Approved by Standards Council a of Canada Published July 1978 by the Canadian Government Specifications Board O Minister of Supply and Services Canada - 1978 NORME NATIONALE OU CANADA GILETS DE CORPS EN TRICOT, MODLES RAS-DE-COU, BOUTONNAGE ET DE STYLE T-SHIRT, GARCONNETS ET GARGONS,