CGSB 9 29-93-CAN CGSB-1993 Papier Lithographique Opaque D-Edition《不透明石版印刷书籍纸 代替9-GP-29Ma》.pdf

1、CGSB CAN/CGSB- 9.29-93 tt 1874650 0023815 539 NATIONAL STANDARD OF CANADA CAN/CGSB-9.29-93 Supersedes 9-GP-29Ma Opaque Litho Book Paper c Canadian G eneral Standards Board Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking pe

2、rmitted without license from IHS-,-,-CGSB CAN/CGSB- 9-29-73 * = L874b50 0023BLb 475 The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed is a government agency within the Federal Department of Supply and Services. CGSB is engaged in the production of vol

3、untary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, tech

4、nical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives. The Ministers Advisory Council on CGSB reviews the results of the consensus process. CGSB has been accredited by the Standards

5、 Council of Canada as a national standards-writing organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as national standar

6、ds, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and national standards developed by CGSB are developed in conformance with the policies described in the Policy Manual for the Developme

7、nt and Maintenance of Standards by CGSB. CGSB standards are subject to review and revision at any time, so as to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome, should be brought to the notice of the standards committees concerned

8、. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, will be found in the CGSB Catalogue, which is published annually and is availa

9、ble without charge upon request. Although the intended primary application of this standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Many tests required by CGSB standards are

10、 inherently hazardous. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. CGSB takes no position respecting the validity of any patent rights asserted with any item connected with this standard. Users of t

11、his standard are expressly advised that determination of the validity of any such patent rights are entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Director Marketing and Corporate Services Branch Canadian General Standards Boar

12、d Ottawa, Canada KIA 1G6 The STANDARDS COUNCIL OF CANADA is the co-ordinating body of the National Standards System, a federation of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal obje

13、ctives of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer. facilitating domestic and international trade, and furthering international co-opera

14、tion in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide, to the greatest practicable exte

15、nt, a balance of representation of producers, users, consumers and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard that is capable of making a significant and timely contribution to the national interest. Approval of a standard as a National St

16、andard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards-writing organization. Those who

17、have a need to apply standards arc encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The responsibility for approving National

18、Standards of Canada rests with the: Standards Council of Canada 45 OConnor Street Suite 1200 Ottawa, Ontario KIP 6N7 I by Telephone - (613) 941-8703 or - (613) 941-8704 by Fax - (613) 941-8705 I by Mail - CGSB Sales Centre Ottawa, Canada K1A 1G6 in Person - Suite 1500 222 Queen Street Ottawa, Ontari

19、o Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 9-29-73 * 1874b50 0023837 301 NATIONAL STANDARD OF CANADA OPAQUE LITHO BOOK PAPER CANICGSB-9.29-93 Supersedes 9-GP-29M

20、a October 1982 Prepared by the Canadian General Standards Board Ss Standards Council of Canada Approved by the e 8 hblished October 1993 by the Canadian General Standards Board Ottawa, Canada K1A 1G6 Minister of Supply and Services Canada - 1993 No part of this publication may be reproduced in any f

21、orm without the prior permission of the publisher. Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 9-29-93 * 3874050 0023838 248 Joss, R.A. Beattie, J. Bird, A.J. Black

22、, M. Blondin, P. Boyes, J. Chollet, J.L. Chute, B. Culbert, B. Dalfen, M.M. Dec, C. Dixon, G.C. Dome, V. Doutre, D. Douville, L. Dub, P. Enriquez, M. Fair, D. Finch, B. 8 Gable, T.H. Gildea, C. Guay, L.M. Handy, J. Hendriks, K.B. Lacroix, A. CANADIAN GENERAL STANDARDS BOARD COMMITTEE ON PRINTING AND

23、 WRITING PAPERS (Membership at date of upprovul) Chairperson Consultant Ottawa Board of Education Du Pont Canada Inc. Mirdon Inc. Dollco Printing Provincial Papers, Division of Abitibi Price Consultant Xerox Canada Inc. Inter City Papers Ltd. Noranda Forest Recycled Paper Rieger Printing Ink Co. Ltd

24、. Crown Paper, Division of Crown Forest Industries Ltd. Tri-Graphic Printing (Ottawa) Ltd. Domtar Fine Papers Ltd. Canada Communication Group Rolland Inc. The Retail Research Laboratories of Canada Department of Industry, Science and Technology Department of National Revenue (Customs and Excise) Cit

25、y of Ottawa Weyerhaeuser Canada Ltd. E.B. Eddy Forest Products Ltd. Department of Energy, Mines and Resources National Archives of Canada Canadian Business Forms Association Laframboise. W.C. Kruger Inc. McCanna, B.W. McLaughlin, D. Michaels, J. Miller, C. Stevenson, I. Stewart, H. Thomas, J. Udy, D

26、.J. Waddell, B. Wood, W.R. Woodman, N. o Lamoureux, D. Repap Enterprises Inc. Ministry of Government Services, Ontario National Library of Canada Barber-Ellis Fine Papers Department of Supply and Services Canadian Pacific Forest Products Ltd. Department of Public Works, Alberta Tembec Inc. Island Pa

27、per Mills Ltd. Canadian Pulp and Paper Association Canada Communication Group Secretary Canadian General Standards Board Acknowledgnrent is made for the French translation of this National Standard of Canda by the Translation Bureau of the Department of the Secretary of State. CANKGSB-9.29-93 Copyri

28、ght Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CANICGSB- 9-29-73 ft 3874650 0023839 LB4 CANICGSB-9.29-93 Supersedes 9-GP-29Ma October 1982 CANADIAN GENERAL STANDARDS BOARD OPAQUE LITH

29、O BOOK PAPER 1. SCOPE 1.1 This standard applies to No. 1 opaque litho book paper, used for face and back offset litho printing of books, magazines, periodicals, pamphlets, etc. Printed matter may include text, line illustrations and 150 lineskm halftones in multicolours. A standard for permanence of

30、 paper is in the course of preparation. I 1.2 The testing and evaluation of a product against this standard may require the use of materials andfor equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard

31、has the responsibility to consult the appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use. e 2. APPLICABLE PUBLICATIONS 2.1 The following publications are applicable to this standard: 2.1.1 CANICGSB-9.0 Methods of Testing Pulp

32、and Paper No.5 - Brightness of Pulp, Paper and Paperboard No.6 - Opacity of Paper No.7 - Grammage of Paper and Paperboard. 2.1.2 Technical Section, Canadian Pulp and Paper Association (CPPA) D.l - Machine Direction of Paper and Paperboard D.4 - Thickness and Density of Paper and Paperboard D.9 - Int

33、ernai Tearing Resistance of Paper, Paperboard and Pulp Handsheets Determined with the Appita- D.14 - Air Resistance of Paper (Gurley Methd) D.29P - Sheffield Roughness of Paper and Paperboard G.25P - pH of Paper and Paperboard (Extract and Surface). * Elmendorf Instrument 2.2 Reference to the above

34、publications is to the latest issues, unless otherwise specified by the authority applying this standard. The sources of these publications are shown in the Notes section. t 3. GENERAL REQUIREMENTS 3.1 Curl - The paper shall lie flat, or have no more than a slight curl that can be overcome under nor

35、mal commercial operating conditions. 3.2 Surface Condition - The paper surface shall be free from blemishes, dust, lint and other particles that may adversely affect its printing or end use. 3.3 3.4 Formation - The formation of the paper shall be close and even. Trim (sheets) - The paper shall be tr

36、immed with clean, smooth edges and shall be evenly jogged. Successive sheets within any stack shall not vary more than 1.5 mm in their respective jogged position, or as specified by the purchaser (par. 8.1). 1 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for

37、ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 9.29-93 * 3874650 0023820 9Tb 3.5 3.6 3.7 3.8 4. 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 2 Trim (rolls) - The edges of the rolls shall be smooth, clean and even. Splices in Rolls - Spce(s) must be flagged with a bright

38、 coloured tag on the edge of the roll, or identified on the end of the roll by means of a stencil or other readily visible mark. The maximum number of splices per roll shall be as follows: Roll Diameter No. of Splices Up to 762 mm 1 From 763 to 1219 mm 2 Over 1220 mm 3 Splices shall not be less than

39、 152 mm from the core, not less than 40 mm from the outside diameter and at least 76 mm between splices, or as specified by the purchaser (par. 8.1). Stock - The paper stock shall normally be free from more iban trace amounts (less than 1%) of unbleached or mechanical pulps, except that no limitatio

40、n is imposed on the amount of deinked or nondeinked, bleached secondary (recycled) fibre, nor on the amount of high-yield pulps, present in the stock. Fluorescent (optical) brighteners may be present. Moisture Content - This paper may be used either in air-conditioned pressrooms or in pressrooms lac

41、king relative humidity and temperature controls. Unless otherwise specified (par. 8.1), paper at time of delivery shall be in equilibrium with a relative humidity of 40 f 5% and a temperature of 23 f 0.5”C if used in air-conditioned pressrooms. If specified “for use in non-air-conditioned pressrooms

42、” ar. 8. i), the paper at time of delivery shall be in suitable equilibrium with seasonally prevailing relative humidity and temperature conditions. DETAILED REQUIREMENTS Size (sheets) - The paper shall be furnished in the sheet sizes specified (par. 8.1). For sheet sizes up to and including 216 x 3

43、56 mm, the paper sha not be undersize, and not more than 0.8 mm oversize in either direction. For sheet sizes larger than 216 x 356 mm, the paper shall not be undersize, and not more than 2.4 mm oversize in either directions. Successive sheets within any package shall not differ from one another by

44、more than 0.8 mm. Sheets shall be square on all four sides within a tolerance of 0.8 mm in each 762 mm as determined on a squaring table. The edge bow in individual sheets shall not be more than 0.8 mm in each 762 mm, as determined by turning a sheet over, butting an edge against the corresponding e

45、dge of the sheet below, measuring the gap between them, and taking half of this measurement. Size (roils) - The rolls shall be as specified (par. 8.1) in width with a tolerance of 0.8 mm. Diameters shall be as specified I13 mm. Roll diameters may be less if the specified diameter can only be obtaine

46、d by splicing within 76 mm of the outside diameter of the roll. Cores (rolis) - The paper shall be wound on a 76 mm inside diameter non-retumable core, or as specified by the customer. Cores shall be of fibrous material, and shall have a wooden, plastic or metai bung at each end. Grammage - The pape

47、r shall be supplied in the grammage listed in Table 1, with a tolerance of f5%, when determined in accordance with CANKGSB-9.0 No.7. Thickness - The paper shall conform to the average thickness in Table 1, with a tolerance of 0.005 mm. The difference in average thicknesses between sheets shall not e

48、xceed 0.005 mm. Individual sheets shall be uniform in thickness and the difference between the highest and lowest thickness across each sheet shall not exceed 0.008 mm. Grain Direction (sheets) - The grain direction, when determined in accordance with Technical Section, CPPA standard D.l, shall be a

49、s specified (par. 8.1). Colour - The paper shall be white or coloured as Specified (par. 8.1). The colour and brightness of the paper shall match the supplied reference in accordance with commercial colour matching practice. Hydrogen Ion Concentration (pH) - The pH value of the cold extract of the paper shall not be less than 4.8 when determined in accordance with Technical Section, CPPA standard G.25P. C ANKGSB-9.29-93 Copyright Canadian General Standards Board Provided by IHS unde