CGSB 9 51-93-CAN CGSB-1993 Dry Toner Xerographic Copy and Electrostatic Duplicating Copy Paper《墨粉静电复印纸与静电复写纸 代替9-GP-51M》.pdf

1、CGSB CAN/CGSB- 9.53-93 * NATIONAL STANDARD OF CANADA Dry Toner Xerographic Copy and Electrostatic Duplicating Copy Paper 0 Canadian General Standards Board m 3874650 0023833 783 m CANICGSB-9.51-93 Supersedes 9-GP-5 1 M Copyright Canadian General Standards Board Provided by IHS under license with CGS

2、BNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 7-53-73 SX l1874h.50 0023832 618 = The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed is a government agency within the Federal Department of Supply and

3、Services. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consun:-rs and other users, ret

4、ailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives. The Ministers Advisory Council on CGSB reviews the results of the consensus

5、 process. CGSB has been accredited by the Standards Council of Canada as a national standards-writing organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In add

6、ition to standards it publishes as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and national standards developed by CGSB are developed in conformance with the polici

7、es described in the Policy Manual for the Development and Maintenance of Standards by CGSB. CGSB standards are subject to review and revision at any time, so as to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome, should be brought

8、to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, will be found in the CGSB C

9、atalogue, which is published annually and is available without charge upon request. Although the intended primary application of this standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular

10、 purpose. Many tests required by CGSB standards are inherently hazardous. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. CGSB takes no position respecting the validity of any patent rights asserted wit

11、h any item connected with this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights are entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Director Marketing and Corpor

12、ate Services Branch Canadian General Standards Board Ottawa, Canada KIA 1G6 The STANDARDS COUNCIL OF CANADA is the Co-ordinating body of the National Standards System, a federation of independent, autonomous organizations working towards the further development and improvement of voluntary standardi

13、zation in the national interest. The principal objectives of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and interna

14、tional trade, and furthering international co-operation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective

15、interests provide, to the greatest practicable extent, a balance of representation of producers, users. consumers and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard that is capable of making a significant and timely contribution to the nationa

16、l interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the ac

17、credited standards-writing organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the s

18、tandard. The responsibility for approving National Standards of Canada rests with the: e Standards Council of Canada 45 OConnor Street Suite 1200 Ottawa, Ontario KIP 6N7 How to order SS Publications: by Telephone - (613) 941-8703 or - (613) 941-8704 by Fax - (613) 941-8705 by Mail - CGSB Sales Centr

19、e Ottawa, Canada KIA 1G6 in Person - Suite 1500 222 Queen Street Ottawa, Ontario Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CANICGSB- 7-53-93 * 1874650 0023833 554 NATIONAL

20、STANDARD OF CANADA C ANICGSB-9.5 1-93 Supersedes 9-GP-5 1 M November 1982 DRYTONERXEROGRAPHICCOPYAND ELECTROSTATIC DUPLICATING COPY PAPER Prepared by the Canadian General Standards Board es Approved by the Standards Council of Canada Published November 1993 by the Canadian General Standards Board Ot

21、tawa, Canada KIA 1G6 QMininter of Supply and Services Canada - 1993 No part of this publicaiion may be reproduced in any form without the prior permission of the publisher. Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking p

22、ermitted without license from IHS-,-,-CLSB CAN/CGSB- 9.53-93 * 1874650 0023834 490 CANADIAN GENERAL STANDARDS BOARD COMMITTEE ON PRINTING AND WRITING PAPERS (Membership at abte of approval) Joss, R.A. Chaitperson Beattie, J. Bird, A.J. Black, M. Blondin, P. Boyes, J. Chollet, J.L. Chute-, B. Corcora

23、n, B. Culbert, B. Dalfen, M.M. Dec, c. Dixon, G.C. Doane, V. Doutre. D. Douville, L. DUM, P. Fair, D. Gildea. C. Guay. L.M. Handy, J. Hendnks, K.B. Laframboise, W.C. LHeureux, L. McCanna, B.W. McLaughlin, D. Michaels, J. Miller, C. Stevenson, I. Stewart, H. Thomas, J. Udy, D.J. Waddell, B. Wood, W.R

24、. Woodman, N. Armstrong, C. Secretary Consultant Ottawa Board of Education Du Pont Canada Inc. Mirdon Inc. Dollco Printing Provincial Papers, Division of Abitibi Price Consultant Xerox Canada Inc. Canadian Business Forms Association Inter City Papers Ltd. Noranda Forest Recycled Paper Rieger Printin

25、g Ink CO. Ltd. Crown Paper, Division of Crown Forest Industries Ltd. Tri-Graphic Printing (Ottawa) Ltd. Domtar Fine Papers Ltd. Canada Communication Group Rolland Inc. Department of Industry, Science and Technology Weyerhaeuser Canada Ltd. E.B Eddy Forest Products Ltd. Department of Energy, Mines an

26、d Resources National Archives of Canada Kruger Inc. Department of National Revenue (Customs and Excise) Repap Enterprises Inc. Ministry of Government Services, Ontario National Library of Canada Barber-Ellis Fine Papers Department of Supply and Services Canadian Pacific Forest Products Ltd. Departme

27、nt of Public Works, Alberta Tembec Inc. Island Paper Mills Co. Canadian Pulp and Paper Association Canada Communication Group Canadian General Standards Board Acknowledgment is made for the French translation of this Nationai StMdard of Canda by the Translation Bureau of the Department of the Secret

28、ary of State. CANKGSB-9.51-93 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-e 1. 1.1 I .2 1.3 2. 2.1 2.1.1 e 2.1.2 2.1.3 2.2 3. 3.1 CGSB CAN/CGSB- 9.53-93 * m 1874650 0023835 327 m

29、CANKGSB-9.51-93 Supersedes 9-GP-5 1 M November 1982 CANADIAN GENERAL STANDARDS BOARD DRY TONER XEROGRAPHIC COPY AND ELECTROSTATIC DUPLICATING COPY PAPER SCOPE This standard applies to xerographic copy paper, standard finish, for use in dry toner, plain paper photocopiers, in sheets or rolls and to e

30、lectrostatic duplicating paper for use in dry toner, plain paper, photocopiers and small duplicating offset presses. For more detailed information on intended uses, see par. 8.2. The testing and evaluation of a product against this standard may require the use of materiais and/or equipment that coul

31、d be hazardous. This document does not purport to address ali the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regu

32、latory requirements prior to its use. APPLICABLE PUBLICATIONS The following publications are applicable to this standard: Canadian General Standards Board (CGSB) CAN/CGSB-9.0 - Methods of Testing Pulp and Paper No. 5 - Brightness of Pulp, Paper and Paperboard No. 6 - Opacity of Paper No. 7 - Grammag

33、e of Paper and Paperboard. Technical Section, Canadian Pulp and Paper Association (CPPA) Standard Testing Methods: D.l - Machine Direction of Paper and Paperboard D.4 - Thickness and Density of Paper and Paperboard D.14 - Air Resistance of Paper (Gurley Method) D.28P - Stiffness of Paper and Paperbo

34、ard (Taber Method) G.3 - Moisture in Paper. Technical Association of the Pulp and Papr Industry (TAPPI) UM-535 - Smoothness of Paper and Paperboard (Bendben Me .a Reference to the above publications is to ihc laiest issues. unless otherwise specified by the authority applying the standard. The sourc

35、es of these publications are shown in the Notes section. CLASSIFICATION Paper shall be supplied in sheets or rolls. as specified by the purchaser (par. 8.1). 1 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted with

36、out license from IHS-,-,-CGSB CAN/CGSB- 9.53-73 * 1874b50 0023836 263 m GENERAL REQUIREMENTS Curl - When supplied in sheets, the paper as received shall lie flat or shall curl slightly away from the side intended to be imaged first. Surface Condition - The paper surface shall be free from blemishes,

37、 dust, lint and other particles that may adversely affect its end use. O 4. 4.1 4.2 4.3 4.4 4.4. 4.4.2 4.5 4.6 4.7 5. 5.1 5.1.1 5.1.2 5.2 5.3 5.4 5.5 5.6 6. 6. i 6.1.1 Formation - The formation of the paper shall be close and even. TNn Sheets - The paper may be trimmed or precision cut and shall hav

38、e clean smooth edges. The sides shall be free from significant fuzzing. Individual sheets shall not stick together for reasons of burred edges or other causes. Individual sheets shall differ no more than 1 .O mm in their jogged position. Roa - The ends of the rolls shall be clean and even, and shall

39、 be free from excessive dust. Stock - The paper stock shall normally be free from more than trace amounts (less than 1%) of unbleached or mechanical pulps except that no limitation is imposed on the amount of deinked or non-deinked bleached secondary (recycled) fibre, nor on the amount of high-yield

40、 pulps, present in the stock. Fluorescent (optical) brighteners may be present. Moisture Content - Unless otherwise specified (par. 8.1), the moisture content of the paper, at time of delivery, shall be such that the paper will be in equilibrium with a room atmosphere having a relative humidity of 4

41、.5 f 0.8%. Winding - No splices shall be present in any roll. The paper shall be wound on a core with an inside diameter of 75 mm, or as specified by purchasers (par. 8.1). DETAILED REQUIREMENTS Physical Dimensions Sheets - The paper shall be supplied in sheet sizes specified (par. 8.1), with a leng

42、th and width tolerance of 11.0 mm. Successive sheets within any package shall not differ more than 1.0 mm in length or width. Sheets shall be square on all four sides with a tolerance of 0.5 mm in either total length or total width. The opposite sides and edges shall be parallel within 0.5 mm. Roh -

43、 The paper shall be supplied in rolls as specified (par. 3.1). Each roll shall contain a minimum of 175 m. Roll width shall be as specified with a maximum variation of 1.0 mm. Roll diameter shall be 18 cm maximum. Grammage - The paper shall be supplied in the grammage specified in Table 1 with a tol

44、erance of 35% as determined in accordance with CAN/CGSB-9.1 No. 7. Thickness - The paper shall conform to the average thickness listed in Table 1, with a tolerance of kO.006 mm for both Xerographic Copy and Electrostatic Duplicating. The difference in average thickness between sheets shall not excee

45、d 0.005 mm and individual sheets shall be uniform in thickness within 0.005 mm. Grain Direction - When determined in accordance with Technical Section, CPPA standard D.l, the grain direction shall be as specified (par. 8.1). Physical and Optical Properties - Physical and optical properties shall be

46、in accordance with the requirements of Table 1 when tested according to the specified method. The method for surface resistivity is outlined in par. 7.2.1. Colour - The paper shall be white or coloured, as specified (par. 8.1). PREPARATION FOR DELIVERY Packaging Sheet - Unless otherwise specified (p

47、ar. 8. i), each package shall contain 500 sheets. Packages shall be placed in a carton designed so that the carton is filled to capacity. There shall be a maximum of 5000 sheets per carton and maximum of one ton per skid. 2 CAN/CGSB-9.51-93 Copyright Canadian General Standards Board Provided by IHS

48、under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CANICGSB- 9.53-93 * m LKWLSO 00237 LTT m 6. I .2 6.3 6.3.1 6.3.2 7. 7.1 7.2 7.2.1 e Roh - Unless otherwise specified (par. Ki), each roll shall contain 175 m. Rolls shall be placed in carto

49、ns designed so that the carton is filled to capacity. There shall be a maximum of four rolls per carton and a maximum of one ton per skid. Packing - Unless otherwise specified (par. 8.1). the wrapping material around each package or roll shall be moisture-vapour proof. The wrapping shall not contaminate the copy paper or cause the edges of the paper to tend to stick together. Labelling Sheets - Each package shall indicate which side is intended to be imaged first.