CGSB 98 2-2011-CAN CGSB-2011 Drapeau national du Canada (pour utilisation l抜nt閞ieur).pdf

1、 CAN/CGSB-98.2-2011Supersedes CAN/CGSB-98.2-92National Flag of Canada (Indoor use)ICS 99.020.10National Standard of CanadaCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-The CANADIAN

2、GENERAL STANDARDS BOARD (CGSB), under whose auspices this National Standard of Canada has been developed is a government agency within Public Works and Government Services Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards

3、 committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations.

4、 Any given standard is developed on the consensus of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada as a national standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the criteri

5、a and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standar

6、ds and CGSB national standards are developed in conformance with the policies described in the CGSB Policy Manual for the Development and Review of Standards. CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. Suggestions for their improveme

7、nt, which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and or

8、dering instructions, is found in the CGSB Catalogue, which is published annually and is available without charge upon request. More information is available about CGSB products and services at our Web site www.ongc-cgsb.gc.ca. Although the intended primary application of this standard is stated in i

9、ts Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This docum

10、ent does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its us

11、e. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall not be held r

12、esponsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Manager Stand

13、ards Division Canadian General Standards Board Gatineau, Canada K1A 1G6 The STANDARDS COUNCIL OF CANADA is the coordinating body of the National Standards System, a coalition of independent, autonomous organizations working towards the further development and improvement of voluntary standardization

14、 in the national interest. The principal objects of the SCC are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade,

15、 and furthering international cooperation in the field of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approval does not refer to the techn

16、ical content of the standard; this remains the continuing responsibility of the SDO. A NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (i

17、ncluding consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard, which is capable of making a significant and timely contribution to the national interest. Those who have a need to apply standards are encouraged to use NSCs. These stan

18、dards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO, which publishes the standard. The responsibility for approving standards as National Standards of Canada rests with the: Standards Council of Canada 200-270 Albert Street Ottawa, Ontario K1P

19、6N7 How to order Publications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongcpwgsc.gc.ca on the Web www.ongc-cgsb.gc.ca Copyright Ca

20、nadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NATIONAL STANDARD OF CANADA CAN/CGSB-98.2-2011Supersedes CAN/CGSB-98.2-92 National Flag of Canada (Indoor use)NATIONAL STANDARD OF CANADA CAN/CGSB-

21、3.14-2006Prepared by the Approved by the Canadian General Standards Board Standards Council of CanadaPublished April 2011 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANADA, as represented by the Minister of Public Works and Government Services,

22、 the Minister responsible for the Canadian General Standards Board (2011). No part of this publication may be reproduced in any form without the prior permission of the publisher.CETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONSFRANAISE ET ANGLAISE.Copyright Canadian General Standards Board

23、 Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CAN/CGSB-98.2-2011CANADIAN GENERAL STANDARDS BOARDCommittee on the National Flag of Canada(Voting membership at date of approval)ChairBauerle, J.1Bodycote Materials Testing Cana

24、da Inc.General Interest CategoryBatcheller, J. University of AlbertaDavie, N. ConsultantGagnon, M. Canadian Heritage/Contracting and Materiel Management Horne, L. University of ManitobaIzquierdo, V. Textile Technologies CentreZhao, J. National Defence/QETEZwinkels, J. National Research Council of Ca

25、nadaProducer CategoryArsenault, C. Drapeaux et Bannires Ltendard Inc.Braverman, S. International Flag & Banner Inc.Dawood, A. Scythes Inc.Geurtsen, O. Tri-Tex Co. Inc.Law, I. Flags UnlimitedSloane, R. Flag Connection Inc.Stavinga, B. Invista (Canada) Co.White, R. Textile ArtcraftUser CategoryBacon,

26、R. Canadian Heritage/State Ceremonial and Corporate Events Fauvelle, C. National Capital CommissionCarrick, D. National Defence/DSSPMMacLeod, J. Public Works and Government Services Canada/ Clothing & Textile DivisionPaquette, R. Public Works and Government Services Canada/ Contracting & Procurement

27、Wardroper, A. Royal Canadian Mounted PoliceSecretary (non-voting)Grabowski, M. Canadian General Standards BoardAcknowledgment is made for the translation of this National Standard of Canada by the Translation Bureau of Public Works and Government Services Canada.1General interest CGSB 2011 All right

28、s reservedCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CAN/CGSB-98.2-2011iCGSB 2011 All rights reservedContents1 Scope . 12 Normative references 13 Classification . 23.1 Types . 23

29、.2 Classes 33.3 Sizes 34 General requirements . 35 Detailed requirements . 35.1 Design 35.2 Colours . 35.3 Colourfastness . 45.4 Length (L) and width (W) . 55.5 Materials 55.5.1 Flag 55.5.2 Header . 55.5.3 Sewing thread . 65.5.4 Tie tapes (Type 2 only) . 65.5.5 Leather tabs (Type 3 only) 65.5.6 Orna

30、mental fringe, cord and tassels (Class A only) 65.6 Construction 65.6.1 General 65.6.2 Printed flags 65.6.3 Appliqud flags . 65.6.4 Seams and stitching . 66 Preparation for delivery . 76.1 Packaging and packing 76.2 Labelling 77 Inspection . 77.1 Sampling . 78 Notes 88.1 Options . 88.2 Related publi

31、cations 8PageCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CAN/CGSB-98.2-20111CGSB 2011 All rights reservedNational Flag of Canada (Indoor use) Scope1 This standard applies to the d

32、esign, colour, materials, construction and performance requirements of the National Flag of Canada intended for indoor use.The testing and evaluation of a product against this standard may require the use of materials and equipment that could be hazardous. This standard does not purport to address a

33、ll the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accep

34、ts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed.Normative references 2 The following normative documents contain provisions that, through reference in this text, constitute provisions of this National Standard of Canada. The referenc

35、ed documents may be obtained from the sources noted below.An undated reference is to the latest edition or revision of the reference or document in question, unless otherwise specified by the authority applying this standard. A dated reference is to the specified revision or edition of the reference

36、 or document in question. However, parties to agreements based on this National Standard of Canada are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Canadian General Standards Board 2.1 CAN/CGSB-4.2 Textile Test Methods:No.

37、 4.1 Textiles Fabrics Determination of Width and LengthNo. 5.1 Unit Mass of FabricsNo. 18.3/ISO 105-B02 Textiles Tests for Colourfastness Part B02: Colourfastness to Artificial light: Xenon Arc Fading Lamp TestNo. 19.1 Colourfastness to Washing Accelerated Tests Launder-OmeterNo. 22 Colourfastness t

38、o Rubbing (Crocking)No. 25.1 Dimensional Change in WettingNo. 27.1 Flame Resistance Vertical Burning TestNo. 29.1 Colourfastness to Dry Cleaning Solvent4-GP-85 Nylon Thread (Continuous Multifilament)4-GP-97 Polyester Thread (Continuous Multifilament)CAN/CGSB-86.1 Care Labelling of TextilesCAN/CGSB-5

39、4.1 Part 1/ISO 4915 Stitches and Seams Part 1: Textiles Stitch Types Classification and Terminology.Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2CAN/CGSB-98.2-2011CGSB 2011 All ri

40、ghts reservedSource 2.1.1 The above may be obtained from the Canadian General Standards Board, Sales Centre, Gatineau, Canada K1A 1G6. Telephone 819-956-0425 or 1-800-665-2472. Fax 819-956-5740. E-mail ncr.cgsb-ongctpsgc-pwgsc.gc.ca. Web site www.ongc-cgsb.gc.ca.American Society for Testing and Mate

41、rials (ASTM)2.2 D1388-1996 (2002) Standard Test Method for Stiffness of FabricsE308 Standard Practice for Computing the Colors of Objects by Using the CIE System.Source2.2.1 The above may be obtained from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, U.S.A., telephone

42、610-832-9585, fax 610-832-9555, or from IHS Canada, 1 Antares Drive, Suite 200, Ottawa, Ontario K2E 8C4, telephone 613-237-4250 or 1-800-387-4408, fax 613-237-4251, Web site . International Commission on Illumination (CIE)2.3 CIE S 014-1/E2006 / ISO 11664-1 Colorimetry Part 1 : CIE Standard Colorime

43、tric ObserversCIE S 014-2/E2006 / ISO 11664-2 Colorimetry Part 2 : CIE Standard Illuminants.Source2.3.1 The above may be obtained from the CIE Central Bureau, Kegelgasse 27, A-1030 Vienna, Austria. Telephone +43 1 71432870. Fax +45 1 714318718. Web site www.cie.co.at. Classification 3 The flag shall

44、 be supplied in the following types, classes and sizes as specified (clause 8.1).Types3.1 Type Subtype In accordance with figures 1- Header with open-sleeve 1A Integral header 6 and 9 (Sections A-A, B-B, D-D)1B Separate header 6 and 11 (Sections A-A, B-B, D-D)2- Header with open-sleeve and tie tapes

45、 2A Integral header 7 and 9 (Sections A-A, B-B, C-C, E-E)2B Separate header 7 and 11 (Sections A-A, B-B, C-C, E-E)3- Header with open-sleeve and leather tabs3A Integral header 8, 9 (Sections A-A, B-B), and 10 (Section F-F)3B Separate header 8, 11 (Sections A-A, B-B), and 12 (Section F-F)Copyright Ca

46、nadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CAN/CGSB-98.2-20113CGSB 2011 All rights reservedClasses3.2 Class A With ornamental fringe, cord and tasselsClass B Without ornamental fringe, cord

47、and tassels.Sizes3.3 Size 1 12 x 24 cmSize 2 15 x 30 cmSize 3 20 x 40 cmSize 4 30 x 60 cmSize 5 45 x 90 cmSize 6 65 x 130 cmSize 7 82 x 164 cmSize 8 90 x 180 cm.General requirements 4 The flag shall be free of defects in materials and workmanship that may affect its appearance or serviceability.Deta

48、iled requirements 5 Design5.1 The flag shall be of the proportions two by length and one by width, containing in its centre a white square the depth of the flag, with a single red maple leaf centred therein, in accordance with Figure 1.Colours 5.2 The red and white colours shall have the following CIE (International Commission on Illumination) colour co-ordinates when measured in accordance with ASTM E308 using CIE Standard 1964 IIluminant D65 and the CIE 1964 Standard Colorimetric Observer with specular reflection excluded:Table 1 Colorimetric requireme