CISPR TR 30-1-2012 Test method on electromagnetic emissions - Part 1 Electronic control gear for single- and double-capped fluorescent lamps《电磁辐射的试验方法 第1部分 单端和双端荧光灯用电子控制装置》.pdf

1、 CISPR TR 30-1 Edition 1.0 2012-08 INTERNATIONAL STANDARD Test method on electromagnetic emissions Part 1: Electronic control gear for single- and double-capped fluorescent lamps CISPR TR 30-1:2012(E)INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE THIS PUBLICATION IS COPYRIGHT PROTECTED Copyri

2、ght 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member Natio

3、nal Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22

4、 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related te

5、chnologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced

6、search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Publis

7、hed details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in a

8、dditional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. CISPR TR 30-1 Edit

9、ion 1.0 2012-08 INTERNATIONAL STANDARD Test method on electromagnetic emissions Part 1: Electronic control gear for single- and double-capped fluorescent lamps INTERNATIONAL ELECTROTECHNICAL COMMISSION R ICS 33.100.10 PRICE CODE ISBN 978-2-83220-312-5 INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFE

10、RENCE Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 TR CISPR 30-1 IEC:2012(E) CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Presumption of compliance . 6

11、4 Test method . 7 5 Reference luminaire . 7 5.1 Construction 7 5.2 Mounting and wiring schemes 7 5.3 Grounding . 8 5.4 Wiring 8 6 Marking 9 7 Guidance for luminaire design 9 Annex A (informative) Mounting and wiring schemes . 10 Figure A.1 Mounting and wiring scheme of a reference luminaire for two

12、double-capped fluorescent lamps . 10 Figure A.2 Mounting and wiring scheme of a reference luminaire for two single-capped fluorescent lamps, two-sided electronic control gear terminals 11 Figure A.3 Mounting and wiring scheme of a reference luminaire for two single-capped fluorescent lamps, single-s

13、ided electronic control gear terminals 12 Figure A.4 Mounting scheme of a reference luminaire for one, two, three or four double-capped fluorescent lamps 13 Figure A.5 Mounting scheme of a reference luminaire for one, two, three or four single-capped fluorescent lamps, two-sided electronic control g

14、ear terminals . 14 Figure A.6 Mounting scheme of a reference luminaire for one, two, three or four single-capped fluorescent lamps, single-sided electronic control gear terminals 15 Figure A.7 Mounting and wiring schema of a reference luminaire for four double-capped fluorescent lamps where the outp

15、ut terminals of the electronic control gear are positioned on both ends 16 Figure A.8 Mounting and wiring schema of reference luminaires for one, two, three or four double-capped fluorescent lamps where the output terminals of the electronic control gear are positioned on both ends 17 Figure A.9 Mou

16、nting and wiring schema of a reference luminaire for one circular-shaped fluorescent lamp, single-sided electronic control gear terminals 18 Figure A.10 Mounting and wiring schema of a reference luminaire for two circular-shaped fluorescent lamps, single-sided electronic control gear terminals 19 Ta

17、ble 1 Grounding connection overview for protection class I and class II applications 9 TR CISPR 30-1 IEC:2012(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ TEST METHOD ON ELECTROMAGNETIC EMISSIONS Part 1: Electronic control gear for single- and double-capped fluorescent lamps FOREWORD 1) The Inte

18、rnational Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and elec

19、tronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committe

20、es; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for St

21、andardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has

22、 representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurat

23、e, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional

24、publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some

25、 areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents in

26、cluding individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or re

27、liance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the

28、 elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee may propose the publication of a tec

29、hnical report when it has collected data of a different kind from that which is normally published as an International Standard, for example “state of the art“. CISPR 30-1, which is a technical report, has been prepared by CISPR subcommittee F: Interference relating to household appliances tools, li

30、ghting equipment and similar apparatus. This first edition of CISPR/TR 30-1 cancels and replaces the first edition of CISPR/TR 30 published in 2001. It is a technical revision. This edition includes the following significant technical changes with respect to the previous edition: minor correction of

31、 wiring distances of reference luminaire in Figure A.1; 4 TR CISPR 30-1 IEC:2012(E) addition of reference luminaires for electronic control gear with output terminals on both ends; addition of reference luminaires for electronic control gear for circular-shaped fluorescent lamps; introduction of con

32、trol gear marking indicating suitability for application in protection class I and/or class II luminaires. The text of this technical report is based on the following documents: Enquiry draft Report on voting CISPR/F/538/DTR CISPR/F/577/RVC Full information on the voting for the approval of this tec

33、hnical report can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the CISPR 30 series can be found, under the general title Test method on electromagnetic emissions, on the IEC

34、website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced

35、by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. TR CISPR 30-1 IEC:2012(E) 5 INTRODUCTION Requirements to limit radio-frequency disturbances from lighting equipment are standardized in CISPR 15. They are restricted to those kinds of lighting eq

36、uipment which are considered as finished products and intended to be placed on the market for the end user, viz. luminaires, self-ballasted lamps and independent lamp control gear. No emission requirements apply to components intended to be built into luminaires. Most electronic control gear for lam

37、ps (tubular fluorescent, low voltages halogen incandescent lamps or HID-lamps) are built into a number of different types of luminaires: not only in luminaires of different manufacturers but also in different types of luminaires of one manufacturer. All those luminaires are tested, although disturba

38、nce data of a certain luminaire can be predicted from other luminaire measurements equipped with the same electronic control gear and lamps. This has led to the question whether a worst-case test luminaire could be designed in which the electronic control gear could be tested. In the event that this

39、 test luminaire complies with the relevant requirements, all luminaires where that particular electronic control gear is built in comply, and a great deal of superfluous testing can be avoided. This idea looks correct, simple and interesting, but leads to two comments: a worst-case luminaire is too

40、strict. From pre-measurements it appeared that commercial electronic control gear did not pass some tests in a worst-case dummy luminaire, whereas they do in real luminaires; even if the electronic control gear passes the tests in a worst-case luminaire, the question remains who is responsible in ca

41、se the real luminaire, where it is built in, does not comply. The conclusion is that it is not advisable to change the basic principle of CISPR 15 that no emission requirements apply to components built into a luminaire. There is, however, a need for an independent test method to check the behaviour

42、 of an electronic control gear in the radiofrequency spectrum. This edition of CISPR/TR 30-1, which replaces CISPR/TR 30, is published in conjunction with CISPR/TR 30-2. Each part of CISPR 30 series is independent and describes the test set-up for electronic control gear use together with a special

43、lamp family. The formatting into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognised. CISPR 30-1 is a technical report for such a method, and it concerns electronic control gear for single- a

44、nd double-capped fluorescent lamps. CISPR 30-2 describes reference luminaires for EMC testing of electronic control gear for discharge lamps other than fluorescent lamps. 6 TR CISPR 30-1 IEC:2012(E) TEST METHOD ON ELECTROMAGNETIC EMISSIONS Part 1: Electronic control gear for single- and double-cappe

45、d fluorescent lamps 1 Scope This part of CISPR 30, which is a technical report, details, with the aid of reference luminaires, an independent method by which the radio disturbance characteristics of electronic control gear for fluorescent lamp luminaires with protection classes I and/or II may be co

46、mpared against the requirements of CISPR 15. This technical report covers electronic control gear for double-capped fluorescent lamps fitted with G5 or G13 lamp caps and to single-capped fluorescent lamps fitted with lamp caps: 2GX7, 2G8, 2G10, 2G11, 2GX13, G23, GX23, G24q, GX24q, GR8, and GR10q. NO

47、TE The above listing shows a typical selection of caps which are commonly used and does not lay claim to be exhaustive. It is specifically applicable for equipment to be connected to 230 V 50 Hz mains power networks. For other power systems, modifications may be necessary. 2 Normative references The

48、 following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. CISPR 15:2

49、005, Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment Amendment 1 (2006) Amendment 2 (2008) 3 Presumption of compliance The electronic lamp control gear in conjunction with the appropriate reference luminaire is deemed to comply with the radiofrequency disturbance limits of CISPR 15 if it complies with the terminal voltage limits of Table 2a of CISPR 15:2005 and with the radiated disturbance limits of Table 3a and Table 3