CSA B140 0-2003 Oil-Burning Equipment General Requirements (Third Edition).pdf

1、B140.0-03(reaffirmed 2013)Oil-Burning Equipment: General RequirementsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volu

2、nteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and ex

3、clusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-inf

4、ringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule,

5、 or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL

6、 OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT,

7、EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any

8、person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the informatio

9、n contained in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights

10、and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inve

11、ntions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA G

12、roups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rights

13、Attention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such pat

14、ent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOM

15、PUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$(b) editorial clarifications;(c) added requirements for appliances that have the burner mounted on a hinged door;(d) removal of the requirement for pressure-relief ports;(e) revisions to the markings and in

16、structions;(f) clarification on the interpretation of the smoke density test;(g) revision of the term “flue pipe” to “vent connector”;(h) specification of generic test methods rather than specific test equipment;(i) revision of the casing (jacket) heat loss test;(j) added requirements for direct con

17、nection of combustion air;(k) the addition of a gas passageway leakage test;(l) added requirements for used-oil appliances; and(m) added requirements for burner shut-off systems in case of an obstructed vent.This Standard was prepared by the Technical Committee on Oil-Burning Appliance Standards, un

18、derthe jurisdiction of the Strategic Steering Committee on Fire Safety and Fuel Burning Equipment, and hasbeen formally approved by the Technical Committee. It will be submitted to the Standards Council ofCanada for approval as a National Standard of Canada.October 2003Notes:(1) Use of the singular

19、does not exclude the plural (and vice versa) when the sense allows.(2) Although the intended primary application of this Standard is stated in its Scope, it is important to note that itremains the responsibility of the users of the Standard to judge its suitability for their particular purpose.(3) T

20、his publication was developed by consensus, which is defined by CSA Policy governing standardization Code ofgood practice for standardization as “substantial agreement. Consensus implies much more than a simple majority, butnot necessarily unanimity”. It is consistent with this definition that a mem

21、ber may be included in the Technical Committeelist and yet not be in full agreement with all clauses of this publication.(4) CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appropriatecommittee.(5) All enquiries regarding this Standard, inc

22、luding requests for interpretation, should be addressed to CanadianStandards Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6. Requests for interpretation should(a) define the problem, making reference to the specific clause, and, where appropriate, include an illustra

23、tive sketch;(b) provide an explanation of circumstances surrounding the actual field condition; and(c) be phrased where possible to permit a specific “yes” or “no” answer.Committee interpretations are processed in accordance with the CSA Directives and guidelines governingstandardization and are pub

24、lished in CSAs periodical Info Update, which is available on the CSA Web site at www.csa.ca. Canadian Standards Association Oil-Burning Equipment: General RequirementsOctober 2003 xiForewordThe Canadian Standards Association (CSA) develops standards under the name Canadian StandardsAssociation, and

25、provides certification and testing under the name CSA International. CSA Internationalprovides certification services for manufacturers who, under license from CSA, wish to use theappropriate registered CSA Marks on certain products of their manufacture to indicate conformity withCSA Standards.CSA C

26、ertification for a number of products is provided in the interest of maintaining agreed-uponstandards of quality, performance, interchangeability and/or safety, as appropriate. Where applicable,certification may form the basis for acceptance by inspection authorities responsible for enforcement ofre

27、gulations. Where feasible, programs will be developed for additional products for which certification isdesired by producers, consumers, or other interests. In performing its functions in accordance with itsobjectives, CSA does not assume or undertake to discharge any responsibility of the manufactu

28、rer or anyother party. The opinions and findings of the Association represent its professional judgement givenwith due consideration to the necessary limitations of practical operation and state of the art at the timethe Standard is processed.Products in substantial accord with this Standard but whi

29、ch exhibit a minor difference or a new featuremay be deemed to meet the Standard providing the feature or difference is found acceptable utilizingappropriate CSA International Operating Procedures. Products that comply with this Standard shall notbe certified if they are found to have additional fea

30、tures which are inconsistent with the intent of thisStandard. Products shall not be certifiable if they are discovered to contravene applicable laws orregulations.Testing techniques, test procedures, and instrumentation frequently must be prescribed byCSA International in addition to the technical r

31、equirements contained in Standards of CSA. In additionto markings specified in the Standard, CSA International may require special cautions, markings, andinstructions that are not specified by the Standard.Some tests required by CSA Standards may be inherently hazardous. The Association neither assu

32、mesnor accepts any responsibility for any injury or damage that may occur during or as the result of tests,wherever performed, whether performed in whole or in part by the manufacturer or the Association, andwhether or not any equipment, facility, or personnel for or in connection with the test is f

33、urnished by themanufacturer or the Association.Manufacturers should note that, in the event of the failure of CSA International to resolve an issuearising from the interpretation of requirements, there is an appeal procedure: the complainant shouldsubmit the matter, in writing, to the Secretary of t

34、he Canadian Standards Association.If this Standard is to be used in obtaining CSA Certification please remember, when making applicationfor certification, to request all current Amendments, Bulletins, Notices, and Technical Information Lettersthat may be applicable and for which there may be a nomin

35、al charge. For such information or forfurther information concerning CSA Certification, please address your inquiry to Applications andCustomer Service, CSA International, 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3. Canadian Standards Association Oil-Burning Equipment: General Requireme

36、ntsOctober 2003 1B140.0-03Oil-Burning Equipment: General Requirements1. Scope1.1This Standard covers construction, general requirements, test methods, marking, and instructions thatare common to some or all of the CSA B140 series of Standards.1.2This is not a complete Standard in itself and must be

37、used in conjunction with one of the other Standardsin the CSA B140 series to form a complete Standard for a particular type of oil-burning appliance orequipment.1.3Each of the other Standards in the B140 series covers construction requirements, marking, instructions,and the detailed testing procedur

38、es for a single classification or a closely related group of oil-burningequipment.1.4Devices or products that comply with the CSA B140 series of Standards may not be acceptable if theyhave additional features which, when examined and tested, are found to reduce the degree of protectionprovided by th

39、e Standards.1.5The values given in SI (metric) units are the standard. The values given in parentheses are forinformation only.2. Definitions and Reference Publications2.1 DefinitionsThe definitions in CSA Standard B139 apply in this Standard. Derivatives of defined terms are to beinterpreted in acc

40、ordance with the corresponding definitions.2.2 Reference PublicationsThis Standard refers to the following publications, and where such reference is made, it shall be to theedition listed below.CSA (Canadian Standards Association)B51-03Boiler, Pressure Vessel, and Pressure Piping CodeB139 (under dev

41、elopment)Installation Code for Oil-Burning EquipmentB140.0-03 Canadian Standards Association2 October 2003B140 series of Standards:B140.1-1966 (R2001)Vapourizing-Type Oil BurnersCAN/CSA-B140.2.1-M90 (R2000)Oil Burners; Atomizing-TypeB140.2.2-1971 (R2001)Pressure Atomizing Oil Burner NozzlesB140.3-19

42、62 (R2001)Oil Burning Stoves and Water HeatersB140.4-1974 (R2001)Oil-Fired Warm Air FurnacesB140.7.1-1976 (R2001)Oil-Fired Steam and Hot-Water Boilers for Residential UseB140.7.2-1967 (R2001)Oil-Fired Steam and Hot-Water Boilers for Commercial and Industrial UseB140.10-1974 (R2001)Oil-Fired Warm Air

43、 Heating Appliances for Mobile Housing and Recreational VehiclesCAN/CSA-B140.11-M89 (R2000)Oil/Gas-Fired Commercial/Industrial Pressure Washers and Steam CleanersB140.12-03Oil-Burning Equipment: Service Water Heaters for Domestic Hot Water, Space Heating, and Swimming PoolsB140.14-M1979 (R2001)Autom

44、atic Flue-Pipe Dampers for Use with Oil-Fired AppliancesCAN/CSA-B149.1-00Natural Gas and Propane Installation CodeCAN3-B255-M81 (R2000)Mechanical Flue-Gas ExhaustersC22.1-02Canadian Electrical Code, Part IC22.2Canadian Electrical Code, Part IIC22.2 No. 3-M1988 (R1999)Electrical Features of Fuel-Burn

45、ing EquipmentC22.2 No. 24-93 (R1999)Temperature-Indicating and -Regulating EquipmentCAN/CSA-C22.2 No. 199-M89 (R1999)Combustion Safety Controls and Solid-State Igniters for Gas- and Oil-Burning Equipment Canadian Standards Association Oil-Burning Equipment: General RequirementsOctober 2003 3ANSI/ASM

46、E (American National Standards Institute/American Society of MechanicalEngineers)B1.20.1-1983 (Reaffirmed 2001)Pipe Threads, General Purpose (Inch)API (American Petroleum Institute)Manual of Petroleum Measurement Standards, 1994 (Reaffirmed 2000), Chapter 9, Section 3ASTM (American Society for Testi

47、ng and Materials)A 53/A 53M-99Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessB 43-98Standard Specification for Seamless Red Brass Pipe, Standard SizesB 68-02Standard Specification for Seamless Copper Tube, Bright AnnealedB 75-02Standard Specification fo

48、r Seamless Copper TubeB 86-98e1Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die CastingsB 135-00Standard Specification for Seamless Brass TubeB 154-95Standard Test Method for Mercurous Nitrate Test for Copper and Copper AlloysB 210-00Standard Specification for Aluminum an

49、d Aluminum-Alloy Drawn Seamless TubesB 234M-00Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat ExchangersB 241/B 241M-00Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded TubeB 302-98Standard Specification for Threadless Copper Pipe, Standard SizesB 315-99Standard Specification for Seamless Copper Alloy Pipe and Tube