CSA B365-2010 Installation code for solid-fuel-burning appliances and equipment (Seventh Edition).pdf

1、B365-10Installation code for solid-fuel-burning appliances andequipmentLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers represe

2、nting varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liability

3、This document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any thi

4、rd partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHAL

5、L CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENU

6、E, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE PO

7、SSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The

8、information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-p

9、rofit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether

10、it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not

11、such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or o

12、thers to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subjec

13、t of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being pr

14、ovided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if i

15、t is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way

16、or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of

17、the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.CSA Standards Update ServiceB365-10April 2010Title: Installation code for solid-fuel-burning appliances

18、 andequipmentPagination: 48 pages (vii preliminary and 41 text), each dated April 2010To register for e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register

19、for updates to this publication is 2420543.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Published in April 2010 by Canadian Standards AssociationA not-for-pr

20、ofit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caB365-10Installation code for solid-fuel-burning appliances andequipmentCSA Standard100%ISBN 978-1-55491-384-8Technical Editor:Laura Con

21、tasti Canadian Standards Association 2010All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.To purchase CSA Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6

22、727 or 416-747-4044.The Canadian Standards Association (CSA) prints its publications on Rolland Enviro100, which contains 100%recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.April 2010 iiiContents Canadian Standards Association

23、 Installation code for solid-fuel-burning appliances andequipmentTechnical Committee on Installation Code for Solid-Fuel-Burning Equipment vPreface vii1Scope 12 Reference publications 23 Definitions 34 General requirements 54.1 Appliances and equipment 54.2 Application 54.2.1 Manufacturers certified

24、 instructions 54.2.2 Mobile home installation 54.3 Hazardous locations 54.4 Ancillary equipment 64.5 Suitability of equipment 64.6 Accessibility 64.7 Electrical features 64.8 Oil-fired, gas-fired, or electric equipment 65 Air for combustion and ventilation 65.1 Protection against depressurization wi

25、thin a building 65.1.1 Heating appliances 65.1.2 Decorative appliances 75.1.3 Protection against depressurization 75.1.4 Spillage detection and alarm systems 75.1.5 Documentation 75.2 Outdoor combustion air ducts 75.3 Ventilation air supply in confined spaces 76 Venting flue gases 86.1 General 86.2

26、Chimneys 86.3 Breech pipes and thimbles 106.4 Flue pipes 106.5 Fireplace inserts and hearth-mounted stoves 116.6 Termination of appliances certified for side-wall venting 137 Controls and safety devices 137.1 General 137.2 Automatic fuel-feeding device controls 138 Installation of appliances 158.1 F

27、loor protection 158.1.1 General 158.1.2 Floor protection 158.1.3 Ember protection 158.1.4 Radiant heat protection 158.2 Wall and ceiling clearances of appliances 16B365-10 Canadian Standards Associationiv April 20109 Installation of ducts 179.1 Materials 179.1.1 Ducts 179.1.2 Joints 179.1.3 Tape 179

28、.2 Clearances 179.2.1 Plenums 179.2.2 Supply air ducts 179.2.3 Return air ducts 1710 Tests 1710.1 Tests and observations 1710.2 Test requirements 1810.2.1 Test point locations 1810.2.2 Draft 1810.2.3 Smoke density 1810.2.4 Analysis of flue gases 1810.2.5 Functioning of safety and operating controls

29、1810.2.6 Fuel input 1811 Additional requirements for solid-fuel-burning add-on furnaces and add-on boilers 19AnnexesA (informative) Fuel and ash storage 30B (informative) Procedure for safety inspection of an existing oil- or gas-fired appliance 32C (informative) Procedure for installing a solid-fue

30、l-burning add-on furnace or boiler on an existing oil-fired, gas-fired, or electric appliance 34D (informative) Outdoor combustion air 35E (informative) Chimney inspection 37F (informative) Functioning of safety and operating controls 38G (informative) Quality of work and responsibilities of install

31、ers 39H (informative) Breech pipe installation 40I (informative) Bibliography 41Tables1 Mild steel flue pipe Minimum thickness 192 Clearances to combustible material for uncertified appliances using solid fuel 203 Reduction in appliance and ductwork clearances from combustible material with specifie

32、d forms of protection 20Figures1 Attachment of a breech pipe to a masonry chimney 212 Passing a flue or breech pipe through a wall of combustible material 223 Minimum clearances to combustible material 234 Flue pipe clearances to walls and ceilings with specified protection 255 Minimum flue pipe cle

33、arances to walls 266 Application of wall and ceiling protection 277 Clearances from the firebox bottom to the floor 29 Canadian Standards Association Installation code for solid-fuel-burning appliances andequipmentApril 2010 vTechnical Committee on Installation Code for Solid-Fuel-Burning EquipmentG

34、.H. Yoshida Office of the Ontario Fire Marshal,Toronto, OntarioChairR. Braaten Carleton Place, Ontario Vice-ChairJ. Herald The Foundry,Orangeville, OntarioVice-ChairR. Blanchard Tarion,Dorchester, OntarioM. Byle Stove Parlour and Gallery Inc.,Tiverton, OntarioAssociateV. De Simini Manor Underwriting

35、 Solutions,King City, OntarioG. Dick Markham Fire and Emergency Services,Markham, OntarioAssociateH. Fletcher Intertek Testing Services NA Ltd.,Mississauga, OntarioAssociateD. Fugler Canada Mortgage and Housing Corporation,Ottawa, OntarioAssociateZ. Gadomski Wood Energy Technicians of BC (WETBC),Por

36、t Coquitlam, British ColumbiaD. Green National Research Council Canada,Ottawa, OntarioAssociateE. Grzesik Ontario Ministry of Energy, Toronto, OntarioJ. Gulland The Wood Heat Organization Inc.,Killaloe, OntarioM. Hladysh Selkirk Canada Corp.,Stoney Creek, OntarioK. Johnson Newmac Manufacturing Inc.,

37、Derbert, Nova ScotiaN. Khan Ontario Ministry of Municipal Affairs and Housing,Toronto, OntarioB365-10 Canadian Standards Associationvi April 2010J.L. LHeureaux SBI Fabriquant de poles international inc.,Qubec, QubecJ. Morrison Chimney Swift Ltd.,Rockwood, OntarioE. Myers Alternative Enterprises,Pete

38、rborough, OntarioD. Olivier Association des Professionnels du Chauffage,Montral, QubecB. Palmateer The Corporation of the City of Peterborough,Peterborough, OntarioF. Preto CANMET Energy Technology Centre,Ottawa, OntarioV.R. Rochon Rochon Engineering Incorporated,Concord, OntarioC. Salvian Alberta M

39、unicipal Affairs and Housing,Edmonton, AlbertaC.A. Short Fredericton, New BrunswickRepresenting ConsumersD. Stewart Office of the Fire Marshal,Halifax, Nova ScotiaT. Stroud Hearth, Patio and Barbecue Association,Arlington, Virginia, USAAssociateP. Wallis Green Valley Heating, Lucan, OntarioB. Yanik

40、W.I.S.E.,Crystal Beach, OntarioL. Contasti Canadian Standards Association,Mississauga, OntarioProject Manager Canadian Standards Association Installation code for solid-fuel-burning appliances andequipmentApril 2010 viiPrefaceThis is the seventh edition of CSA B365, Installation code for solid-fuel-

41、burning appliances and equipment. It supersedes the previous editions, published in 2001, 1991, 1987, 1984, 1982, and 1980.Major changes in this edition include revised requirements for the venting of flue gases and for floor and ember protection of appliances.This Code was prepared by the Technical

42、 Committee on Installation Code for Solid-Fuel-Burning Equipment, under the jurisdiction of the Strategic Steering Committee on Fire Safety and Fuel-Burning Equipment, and has been formally approved by the Technical Committee.April 2010Notes: (1) Use of the singular does not exclude the plural (and

43、vice versa) when the sense allows.(2) Although the intended primary application of this Code is stated in its Scope, it is important to note that it remains the responsibility of the users of the Code to judge its suitability for their particular purpose.(3) This publication was developed by consens

44、us, which is defined by CSA Policy governing standardization Code of good practice for standardization as “substantial agreement. Consensus implies much more than a simple majority, but not necessarily unanimity”. It is consistent with this definition that a member may be included in the Technical C

45、ommittee list and yet not be in full agreement with all clauses of this publication.(4) CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appropriate committee.(5) All enquiries regarding this Code, including requests for interpretation, shou

46、ld be addressed to Canadian Standards Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6. Requests for interpretation should(a) define the problem, making reference to the specific clause, and, where appropriate, include an illustrative sketch;(b) provide an explanation

47、of circumstances surrounding the actual field condition; and(c) be phrased where possible to permit a specific “yes” or “no” answer.Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are published in CSAs periodical Info Update,

48、 which is available on the CSA Web site at www.csa.ca. Canadian Standards Association Installation code for solid-fuel-burning appliances andequipmentApril 2010 1B365-10Installation code for solid-fuel-burning appliances andequipment1Scope1.1This Code specifies requirements for the installation, alt

49、eration, and maintenance of solid-fuel-burning appliances and equipment installed indoors or outdoors.1.2In this Code solid-fuel-burning appliances include(a)furnaces;(b) boilers;(c) stoves;(d) ranges;(e) space heaters;(f) factory-built fireplaces; and(g) water heaters.1.3In this Code, the term “solid fuel” includes(a)cordwood;(b) wood chips;(c) sawdust;(d) peat logs;(e) wood and other biomass pellets;(f) kernel corn; and(g) coal.1.4This Code does not apply to(a)incinerators;(b) site-built fireplaces;(c) process equipment; or(d)