CSA C22 2 NO 18 5-2013 Positioning devices (Second Edition).pdf

1、C22.2 No. 18.5-13Positioning devicesLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpo

2、ints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document

3、 is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys int

4、ellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL

5、 CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST R

6、EVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISE

7、D OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another perso

8、n or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA

9、 Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group

10、 and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may

11、 be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual

12、property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibi

13、lity that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own

14、responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWING

15、ITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ relevant clause, table, and/or figure number; wording of the proposed change; and rationalefor the change.To purchase CSA Group Standards and related publications, visit CSA Groups Online Store atshop.csa.ca or call toll-free 1-800-463-67

16、27 or 416-747-4044.Copyright 2013 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the s

17、ole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the Fifth Edition. The most recent designation of ANSI/UL1565 as an American National Standard (ANSI) occurred on January 23, 2013. ANSI approval for astandard does not include the Cover Page, Transmittal Pages, Title Page

18、 (front and back), or thePreface.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at http:/.To purchase UL Standards, visit Comm 2000

19、 at http:/m- call toll-free 1-888-853-3503.CONTENTSPreface .51 Scope .72 Dated and undated references 73 Normative references 74 Definitions 85 Classification .96 General requirements 107 Marking .117.1 General 117.2 Specific markings based on classification .118 General notes on tests .129 Mechanic

20、al strength requirements .1310 Polymeric materials .1410.1 Flammability classification .1410.2 Relative thermal index rating .1410.3 Substitution of materials .1510.4 Material requirements .1511 Corrosion resistance 1512 Sharp edges .1613 Installation test .1614 Mechanical strength test method .1614

21、.1 General .1614.2 Assembly for test Positioning Devices .1714.3 Assembly for test Separate Mounting Devices .1815 Mechanical strength/elevated temperature test Wiring Ducts .1916 Environmental conditioning .1917 Smoke and heat release tests 20TABLES .21FIGURES 22ANNEX A ADHESIVES (Normative)A1 Scop

22、e .27A2 Requirements 27A3 Method General 27A4 As-received test 27A5 Effect of temperature 28A6 Effect of humidity .30A7 Effect of cold .30A8 Effect of cyclic conditions 30A9 Other test considerations 30JANUARY 25, 2013 CSA C22.2 NO. 18.5-13 UL 1565 3ANNEX B WATER AND ULTRAVIOLET LIGHT EXPOSURE (Norm

23、ative)B1 Retention of mechanical strength following water and ultraviolet light exposure 32B2 Normative references .32B3 Ultraviolet light exposure 32B3.1 Apparatus .32B3.2 Method .33ANNEX C SMOKE AND HEAT RELEASE TEST (Normative)C1 Scope .34C2 Apparatus .34C2.1 General .34C2.2 Ignition source .34C2

24、.3 Test frame enclosure and burner 36C2.4 Collection hood and exhaust duct 38C2.5 Velocity measuring instruments 40C2.6 Gas sampling and analysis equipment 42C2.7 Smoke measuring instruments .42C2.8 Data acquisition 42C3 Pretest calibration 42C3.1 Oxygen analyzer .42C3.2 Heat release rate 43C3.3 Pho

25、tometer system .44C4 Test procedure .44C4.1 Initial preparation 44C4.2 Procedure .44C5 Calculations .44C5.1 Calibration constant 44C5.2 Heat release rate 45C5.3 Smoke release rate 47C5.4 Normalized optical density 47C6 Report 48ANNEX D SUBSTITUTION OF MATERIALS (Informative)D1 Normative references .

26、49D2 Criteria for substitution of materials .49ANNEX E POLYMERIC MATERIAL MODIFICATIONS (Informative)E1 Regrind material 50E2 Additives used in the molding process 50E3 Blending materials 51JANUARY 25, 2013CSA C22.2 NO. 18.5-13 UL 15654PrefaceThis is the harmonized CSA Group and UL Standard for Posi

27、tioning Devices. It is the second edition ofCSA C22.2 No. 18.5, and the fifth edition of UL 1565. This edition of CSA-C22.2 No. 18.5 supersedes theprevious edition published in 2002. This edition of UL 1565 supersedes the previous edition published in2002.This harmonized Standard was prepared by Und

28、erwriters Laboratories and CSA Group. The efforts andsupport of the members of the Technical Harmonization Committee, which includes end productmanufacturers and material suppliers, are gratefully acknowledged.This Standard is considered suitable for use for conformity assessment within the stated s

29、cope of theStandard.This Standard was reviewed by the Technical Subcommittee on ICCM03-Fittings, Hardware andPositioning Devices, under the jurisdiction of the Technical Committee on Wiring Products, and has beenformally approved by the Technical Committee.This standard has been approved by the Amer

30、ican National Standards Institute (ANSI) as an AmericanNational Standard.Where reference is made to a specific number of samples to be tested, the specified number isconsidered a minimum quantity.Note: Although the intended primary application of this standard is stated in its scope, it is important

31、 to note that it remainsthe responsibility of the users of the standard to judge its suitability for their particular purpose.Level of harmonizationThis Standard is published as an equivalent standard for CSA and UL. An equivalent standard is astandard that is substantially the same in technical con

32、tent except as follows. Technical deviations areallowed for Codes and Governmental Regulations, and those recognized as being in accordance withNAFTA Article 905, for example because of fundamental, climatic, geographical, technological orinfrastructural factors, scientific justification or the leve

33、l of protection that the country considersappropriate. Presentation is word for word except for editorial changes.InterpretationsThe interpretation by the SDO (Standards Development Organization) of an equivalent standard shall bebased on the literal text to determine compliance with the standard in

34、 accordance with the proceduralrules of the SDO. If more than one interpretation of the literal text has been identified, a revision shall beproposed as soon as possible to each of the SDOs to more accurately reflect the intent.CSA Group effective dateThe effective date for CSA Group will be announc

35、ed through CSA Informs or a CSA Group certificationnotice.UL effective dateAs of June 1, 2014, all products Listed or Recognized by UL must comply with the requirements in thisstandard.JANUARY 25, 2013 CSA C22.2 NO. 18.5-13 UL 1565 5Between January 25, 2013 and June 1, 2014, new product submittals t

36、o UL may be evaluated under allrequirements in this standard or, if requested in writing, evaluated under presently effective requirementsonly. The presently effective requirements are contained in the fourth edition of UL 1565.A UL effective date is one established by Underwriters Laboratories Inc.

37、 and is not part of the ANSIapproved standard.JANUARY 25, 2013CSA C22.2 NO. 18.5-13 UL 156561 Scope1.1 This standard applies to those metallic and nonmetallic devices used for positioning which mayinclude bundling and securing or to a limited extent supporting cable, wire, conduit, or tubing of a wi

38、ringsystem in electrical installations, to reduce the risk of fire, electric shock, or injury to persons. Thisstandard applies to, but is not limited to, cable clamps, cable and conduit clips, and non-raceway wiringducts.1.2 These requirements do not apply to cable ties or cable tie accessories, coa

39、ted electrical sleeving,extruded insulating tubing, metallic or nonmetallic raceways or woven flexible nonmetallic tubing (fiberloom) employed as mechanical protection for insulated wires or equipment covered by other standards orrequirements.Note 1: Cable ties and cable tie accessories are covered

40、in the Standard for Cable Ties for Electrical Installations,CAN/CSA-C22.2 No. 62275 or UL 62275.Note 2: Nonmetallic Mechanical Protective Tubing (NMPT) is covered in the Standard for Nonmetallic MechanicalProtective Tubing (NMPT), CSA C22.2 No. 227.3 or UL 1696.1.3 These requirements do not apply to

41、 any mechanical protection or electrical insulation that is providedby these devices.1.4 These requirements do not apply to hardware for the support of conduit, tubing, and cable from abuilding structure, such as hangers, staples, straps, and similar devices for installation in accordance withthe Na

42、tional Electrical Code, NFPA 70, and the Canadian Electrical Code (CE Code) Part I.Note: Hardware for the support of conduit, tubing, and cable from a building structure such as hangers, staples,straps, and similar devices for installation in accordance with the National Electrical Code, NFPA 70, an

43、d theCanadian Electrical Code (CE Code) Part I are covered in the Standard for Hardware for the Support of Conduit,Tubing, and Cable, CSA C22.2 No. 18.4 or UL 2239.1.5 In Canada, the requirements in this standard generally address class of workmanship in accordancewith the Canadian Electrical Code (

44、CE Code) Part 1, and where applicable, minor combustiblecomponents in the National Building Code of Canada.2 Dated and undated references2.1 For undated references to Standards, such references shall be considered to refer to the latest editionand all amendments to that edition up to the time when t

45、his Standard was approved. For dated referencesto Standards, such references shall be considered to refer to the dated edition and all amendmentspublished up to the time the Standard was approved.3 Normative referencesCSA Group StandardsC22.1-12Canadian Electrical Code, Part ICAN/CSA-C22.2 No. 0-10G

46、eneral Requirements Canadian Electrical Code, Part IIJANUARY 25, 2013 CSA C22.2 NO. 18.5-13 UL 1565 7CAN/CSA-C22.2 No. 0.17-00Evaluation of Properties of Polymeric MaterialsC22.2 No. 18.4-04Hardware for the Support of Conduit, Tubing, and CableUL StandardsUL 746BPolymeric Materials Long Term Propert

47、y EvaluationsUL 2239Hardware for the Support of Conduit, Tubing, and CableASTM StandardsASTM B117-97Standard Practice for Operating Salt-Spray (Fog) ApparatusIEC StandardsIEC 60216-4-1 (2006)Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 4:Aging O

48、vens Section One: Single Chamber Ovens (Third Edition)IEC 60695-11-10 (2003)Fire Hazard Testing Part 11-10: Test Flames 50 W Horizontal and Vertical Flame Test Methods. (FirstEdition)National Research Council of Canada PublicationNational Building Code of Canada 2011NFPA PublicationNational Electric

49、al Code (NEC)ANSI/NFPA 70-20114 Definitions4.1 For the purpose of this Standard, the following definitions apply to the use of positioning devicesdescribed in Clause 1, Scope.4.2 AIR HANDLING SPACES Ducts or plenums used for environmental air and other spaces usedfor environmental air, such as above hung ceili