CSA C22 2 NO 206-2013 Lighting Poles (Second Edition).pdf

1、C22.2 No. 206-13Lighting polesLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints a

2、nd interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is pr

3、ovided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellect

4、ual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT SHALL CSA GR

5、OUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE,

6、 BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF TH

7、E POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or en

8、tity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA Group i

9、s a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the

10、users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be conta

11、ined in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property

12、and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that

13、 some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsib

14、ility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewi

15、ng it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.In addition, u

16、sers may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in

17、this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update Service

18、C22.2 No. 206-13March 2013Title: Lighting polesTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2422420.If you require assistance, please e-mail techsup

19、portcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legalto find out how we protect your personal information.ISBN 9781771391767 2013 CSA GroupAll rights reserved. No part of this publication may be reproduced to any form whatsoever without the prior permission o

20、f the publisher.Published in March 2013 by CSA Group A not-for-profit private sector organization 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.T

21、MA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Lighting polesC22.2 No. 206-13C22.2 No. 206-13Lighting polesMarch 2013 2013 CSA Group 1ContentsTechnical Committee on Consumer and Commercial Products 2Integrated Committee on Lighting Products 4CSA C22.2 No. 206 Task For

22、ce 9Preface 101 Scope 122 Reference publications 123 Definitions 144 General requirements 145 Mechanical construction 145.1 Access cover 145.2 Means of mounting 155.3 Conductor supports 155.4 Transformer support 155.5 Strain relief 155.6 Weather cap 155.7 Corrosion protection 155.8 Protection agains

23、t deterioration 156 Electrical construction 156.1 Bonding and grounding 156.2 Supply connections 166.3 Raceways and conductor openings 166.4 Separation of circuits 167 Structural requirements 168 Marking 17Annex A (Normative) Grounding and Bonding 18Annex B (Normative) Supplemental requirements for

24、lighting poles equipped with electrical components 22C22.2 No. 206-13Lighting polesMarch 2013 2013 CSA Group 2Technical Committee on Consumer and Commercial ProductsA. Milne 21st Olympiad Sales, Burlington, OntarioRepresenting General InterestsChairD. Mascarenhas Brampton, OntarioRepresenting Genera

25、l InterestsVice-ChairL. Letea CSA Group, Mississauga, OntarioProject ManagerRepresenting Regulatory AuthoritiesD.P. Badry Government of Yukon, Whitehorse, Yukon TerritoryN.J. Breton Electrical Safety Authority, Mississauga, OntarioD.G. Roy Health Canada, Ottawa, OntarioRepresenting ManufacturersJ.E.

26、 Evans Evans Regulatory Certification Consulting, Jasper, OntarioW. Hansen Trane Ingersoll Rand, La Crosse, Wisconsin, USAS. Lawrence Cisco Systems Video Technology Canada, Inc., Scarborough, OntarioG. Lundy IBM Canada Limited, Markham, OntarioR. Martel Electro-Federation Canada, Toronto, OntarioC22

27、.2 No. 206-13Lighting polesMarch 2013 2013 CSA Group 3S. Michaud Thomas b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are

28、processed in accordance with the CSA Directives and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.5) This Standard is subject to periodic review, and suggestions for its improvement will be referred to the appropriate co

29、mmittee. To submit a proposal for change, please send the following information to inquiriescsagroup.organd include “Proposal for change” in the subject line:a) Standard designation (number);C22.2 No. 206-13Lighting polesMarch 2013 2013 CSA Group 11b) relevant clause, table, and/or figure number;c)

30、wording of the proposed change; andd) rationale for the change.C22.2 No. 206-13Lighting polesMarch 2013 2013 CSA Group 12C22.2 No. 206-13Lighting poles1 Scope1.1 This Standard applies to free-standing poles of ferrous metal, aluminum, polymeric, concrete, and wood, and to their accessories, for use

31、in the support of lighting equipment having ratings of 600 V and less, and intended to be installed in the commercial and industrial nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I.1.2 This Standard applies to poles used for the support of lighting equipme

32、nt, such as luminaires, electric signs, and traffic lights. The poles may also serve as supports for aerial conductors, PV modules, and wind turbines used to supply the lighting equipment and, in the case of concrete or metal poles, provide wireways for conductors entering the poles.1.3 This Standar

33、d applies to the electrical features of poles as well as to the mechanical strength aspects and the ability to support their design loads.1.4 This Standard does not apply to the erection of poles or the installation of accessories on site.Note: Lighting Poles for residential applications less than 4

34、 m in height may be evaluated to the requirements of CSA C22.2 No 250.0 for electrical safety only, and be marked NOT EVALUATED FOR STRUCTURAL STRENGTH and NA PAS T VALU QUANT LA RSISTANCE STRUCTURALE.1.5 General requirements applicable to this Standard are given in CAN/CSA-C22.2 No. 0.1.6 In CSA Gr

35、oup Standards, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; “may” is used to express an option or that which is permissible

36、 within the limits of the standard; and “can” is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to table

37、s and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.2 Reference publicationsWhere reference is made to CSA Group Standards of the Canadian Electrical Code,

38、 Parts I and II, such reference shall be considered to refer to the latest edition and all revisions thereto, unless otherwise C22.2 No. 206-13Lighting polesMarch 2013 2013 CSA Group 13specified. This Standard shall refer to the following, and the year dates shown indicate the latest editions availa

39、ble at the time of publication:CSA GroupCAN/CSA-A14-07 (R2012)Concrete polesC22.1-2012Canadian Electrical Code, Part ICAN/CSA-C22.2 No. 0-10General RequirementsCanadian Electrical Code, Part IICAN/CSA-C22.2 No. 0.4-04 (R2009)Bonding of electrical equipmentC22.2 No. 107.1-01 (R2011)General use power

40、suppliesCAN/CSA-C22.2 No. 107.2-01 (R2011)Battery ChargersC22.2 No. 250.0-08LuminairesCAN/CSA-C22.2 No. 60950-1-07 (R2012)Information Technology Equipment Safety Part 1: General RequirementsCAN/CSA-C22.2 No. 61730-1:11Photovoltaic (PV) module safety qualification Part 1: Requirements for constructio

41、nCAN/CSA-C22.2 No. 61730-2:11Photovoltaic (PV) module safety qualification Part 2: Requirements for testingCAN/CSA-C61400-1-08Wind Turbines Part 1: Design RequirementsCAN/CSA-C61400-2-08Wind Turbines Part 2: Design Requirements for Small Wind TurbinesCAN/CSA-O15-05 (R2009)Wood utility poles and rein

42、forcing stubsCAN/CSA-O80 Series-08Wood preservationO86-09Engineering design in woodC22.2 No. 206-13Lighting polesMarch 2013 2013 CSA Group 14CAN/CSA-S6-06Canadian Highway Bridge Design CodeCAN/CSA-S157-05 (R2010)Strength design in aluminumAASHTO (American Association of State Highway and Transportat

43、ion Officials)LTS-1Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals-1975 2009ASME (American Society of Mechanical Engineers)ANSI/ASME B18.6.3-2010Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)ANSI/ASME B18.6.4-1998 (R2005)Thre

44、ad Forming and Thread Cutting Tapping Screws and Metallic Drive Screws (Inch)ANSI/ASME B18.6.7M-1999 (R2005)Metric Machine ScrewsNRCC (National Research Council Canada)National Building Code of Canada, 20103 DefinitionsThe following definition shall apply in this Standard:Energized having an electri

45、cal potential with respect to the earth.4 General requirements4.1 A pole shall have the necessary strength and rigidity to support the design loads without permanent damage or deformation of the assembly and loosening or displacement of the component parts.4.2 Floodlights, secondary wiring, conduit,

46、 conduit fittings, distribution panelboards shall be approved for the purpose for which they are to be used, and other electrical pole equipment shall be of a type suitable for that purpose.5 Mechanical construction5.1 Access coverAny removable part of an enclosure below 3 m from ground, such as an

47、access opening, shall be secured to the enclosure by hardware that requires the use of special tools to be opened or removed.C22.2 No. 206-13Lighting polesMarch 2013 2013 CSA Group155.2 Means of mountingA base plate shall be provided with each pole intended for flange mounting.5.3 Conductor supports

48、Provision shall be made for the installation of conductor supports so that the lengths of unsupported conductors will not exceed the distances specified in Table 1.5.4 Transformer supportPoles with bases or tops intended to support or accommodate ballasts or transformers shall have provision for rig

49、id support of the device.5.5 Strain reliefA means of attaching a strain relief shall be provided inside, at the top of the pole, on poles 15 m above grade and higher, except where the electrical conductors exit directly from the top of the pole.5.6 Weather capExcept where electrical conductors exit directly from the top, all poles shall be provided with a tight- fitting cap.5.7 Corrosion protection5.7.1 Ferrous metal poles shall be protected against rusting in accordance with CAN/CSA-C22.2 No. 0.5.7.2 Aluminum poles shall be prote