CSA C22 2 NO 230-2009 Tray cables (Second Edition Update No 1 February 2014).pdf

1、C22.2 No. 230-09Tray cablesLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to ach

2、ieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any repres

3、entations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA

4、does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES

5、, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DA

6、TA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COS

7、TS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to

8、those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary stand

9、ards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is

10、 the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protec

11、ted by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, mo

12、dification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held re

13、sponsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-comm

14、ercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this d

15、ocument in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attache

16、d standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such

17、 copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Update No. 1C22.2 No. 230-09February 2014Note: For information about the Standards Update Service, go to shop.csa.ca or e-mail techsupportcsagroup.

18、org.Title: Tray cables originally published February 2009The following revisions have been formally approved and are marked by the symbol delta () in the margin on the attached replacement pages:Revised Clause 4New NoneDeleted None Update your copy by inserting these revised pages.Keep the pages you

19、 remove for reference. 2014 CSA Group Tray cablesFebruary 2014C22.2 No. 230-09Tray cables1 Scope1.1 This Standard applies to single conductor and multi-conductor constructions, without metal sheath or armour, suitable for use in cable trays and other applications when installed in accordance with th

20、e Canadian Electrical Code, Part I.1.2 The test and marking requirements of this Standard are in addition to the basic requirements for cable construction that appear in other published CSA product Standards.1.3 In CSA Standards, “shall” is used to express a requirement, i.e., a provision that the u

21、ser is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; “may” is used to express an option or that which is permissible within the limits of the standard; and “can” is used to express possibility or capab

22、ility. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requir

23、ements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.2 Reference publications2.1 This Standard refers to the following publications, and where such reference is made, it shall be to the edition listed below, including all amendments publishe

24、d thereto.CSA (Canadian Standards Association)C22.1-09Canadian Electrical Code, Part ICAN/CSA-C22.2 No. 0-M91 (R2006)General Requirements Canadian Electrical Code, Part IIC22.2 No. 30-M1986 (R2007)Explosion-proof enclosures for use in Class I hazardous locationsCAN/CSA-C22.2 No. 38-05Thermoset-insul

25、ated wires and cablesC22.2 No. 75-08Thermoplastic-insulated wires and cables1(Replaces p. 1, February 2009)C22.2 No. 230-09 2014 CSA GroupFebruary 2014C22.2 No. 96-09Portable power cablesCAN/CSA-C22.2 No. 239-97 (R2006)Control and instrumentation cablesCAN/CSA-C22.2 No. 2556-07Wire and cable test me

26、thodsC68.10-08Shielded power cable for commercial and industrial applications, 546 kV3 General requirementsGeneral requirements applicable to this Standard are given in CAN/CSA-C22.2 No. 0.4 Construction4.1 Constructions include types specified in the following Standards:(a) CAN/CSA-C22.2 No. 38;(b)

27、 CSA C22.2 No. 75;(c) CSA C22.2 No. 96;(d) CAN/CSA-C22.2 No. 239; and(e) CSA C68.10.4.2 Single conductor constructions shall not be smaller than 1/0 AWG.5 Tests5.1 General5.1.1 Tests (mandatory)The following tests shall be conducted on all cables:(a) flame (see Clause 5.2);(b) abnormal low temperatu

28、re impact at 25 C or 40 C (see Clause 5.3);Note: The abnormal low temperature impact test at 40 C is only required where the product marking is “ 40 C” or “MINUS 40 C”.(c) mechanical damage impact (see Clause 5.4);(d) mechanical damage crushing (see Clause 5.5); and(e) weather resistance (see Clause

29、 5.6).5.1.2 Tests (optional)The following tests are optional and require a special marking as shown in Clause 6:(a) abnormal low temperature impact at 40 C (Clause 5.3); and(b) oil resistance (Clause 5.7).5.2 FlameFinished cables shall not have a char length greater than 1.5 m when specimens are tes

30、ted in accordance with the vertical tray flame test (Method 2, FT4) of CAN/CSA-C22.2 No. 2556.(Replaces p. 2, February 2009)2Standards Update ServiceC22.2 No. 230-09February 2009Title: Tray cablesPagination: 17 pages (viii preliminary and 9 text), each dated February 2009To register for e-mail notif

31、ication about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2419618.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at c

32、sagroup.org/legal to find out how we protect your personal information.Published in February 2009 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.Sh

33、opCSA.caC22.2 No. 230-09Tray cablesCSA Standard100%ISBN 978-1-55491-095-3Technical Editor: Leonard Letea Canadian Standards Association 2009All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.To purchase CSA Standard

34、s and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.The Canadian Standards Association (CSA) prints its publications on Rolland Enviro100, which contains 100% recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certi

35、fied, and was manufactured using biogas energy.February 2009 iiiContents Canadian Standards Association Tray cablesTechnical Committee on Wiring Products ivSubcommittee on Fixed Installation Wires and Cables vPreface viii1Scope 12 Reference publications 13 General requirements 24 Construction 25 Tes

36、ts 25.1 General 25.1.1 Tests (mandatory) 25.1.2 Tests (optional) 25.2 Flame 25.3 Abnormal low temperature Impact 35.4 Mechanical damage Impact 35.4.1 Method 1 (TC types only) 35.4.2 Method 2 (TC-ER types) Impact at room temperature 45.5 Mechanical damage Crushing 55.5.1 Method 1 (TC types only) 55.5

37、.2 Method 2 (TC-ER types) Crushing at room temperature 65.6 Weather resistance 75.7 Oil resistance (optional) 75.8 Explosion on cables with bundled subassemblies (optional) 76Marking 86.1 General 86.2 Product markings 86.2.1 Product markings (mandatory) 86.2.2 Product markings (optional) 86.3 Packag

38、e markings 96.3.1 Package markings (mandatory) 96.3.2 Package markings (optional) 9C22.2 No. 230-09 Canadian Standards Associationiv February 2009Technical Committee on Wiring ProductsK.L. Rodel Hubbell Canada LP,Pickering, OntarioRepresenting ManufacturersChairS. Paulsen Province of New Brunswick,F

39、redericton, New BrunswickRepresenting Regulatory AuthoritiesVice-ChairB. Haydon Canadian Standards Association,Mississauga, OntarioProject ManagerRepresenting Regulatory AuthoritiesG. Montminy Rgie du btiment du Qubec,Qubec, QubecT. Olechna Electrical Safety Authority,Mississauga, OntarioA. Tsissere

40、v City of Vancouver,Vancouver, British ColumbiaRepresenting ManufacturersC. Davis Electro Cables Incorporated,Trenton, OntarioP. Desilets Leviton Manufacturing of Canada Limited,Pointe-Claire, QubecB.F. OConnell Tyco Thermal Controls (Canada) Ltd.,Trenton, OntarioD.S. Reith Nexans Canada Inc.,Markha

41、m, OntarioRepresenting General InterestsB. Beland Sherbrooke, QubecD.H. Dunsire Winnipeg, ManitobaConsumer RepresentativeC. Samuels ConocoPhillips Canada Ltd.,Calgary, AlbertaT. Simmons British Columbia Institute of Technology,Burnaby, British Columbia Canadian Standards Association Tray cablesFebru

42、ary 2009 vSubcommittee on Fixed Installation Wires and CablesM. Hartley Nexans Canada Inc.,Markham, OntarioChairC. Hunter Alcan Cable,Las Vegas, Nevada, USAVice-ChairE. Aberbach General Cable Industries, Inc.,Willimantic, Connecticut, USAH. Aitken Nexans Canada Inc.,Fergus, OntarioE.J. Alf Transport

43、 Canada,Ottawa, OntarioJ.M. Asselin Alcan Cable,Mississauga, OntarioG.C. Baker General Cable Industries, Inc.,BICC Brand Utility Cable,Suffern, New York, USAS. Campolo Leviton Manufacturing Company, Inc.,Little Neck, New York, USAC. Choo-Wing General Cable Canada Ltd.,Toronto, OntarioW.F. Constantin

44、e Draka Cableteq USA,North Dighton, Massachusetts, USAD.J. Cotoara Amerace,Richmond Hill, OntarioT. Edwards Alcan Cable,Atlanta, Georgia, USAJ. Ferguson Shawflex,Toronto, OntarioJ.M. Gallagher Bayer MaterialScience LLC,Baytown, Texas, USAB. Harmer CSA International,Toronto, OntarioS. Hawkins ShawCor

45、 Ltd.,Toronto, OntarioC22.2 No. 230-09 Canadian Standards Associationvi February 2009D. Henry Manitoba Department of National Defence,Westwin, ManitobaL.B. Ingram Alcan Cable,Williamsport, Pennsylvania, USAP. Jackson Shawflex,Toronto, OntarioT.R. Jurczak General Cable,Fort Wayne, Indiana, USAG. Kris

46、hnan Southwire Canada Company,Stouffville, OntarioP.M. Leblanc General Cable Industries, Inc.,BICC Brand Utility Cable,Suffern, New York, USAC. Lemay Prysmian Power Cables and Systems Canada Ltd.,Saint-Jean-sur-Richelieu, QubecL. Lisker American Insulated Wire Corporation,Mansfield, Massachusetts, U

47、SAS. Moore Draka Cableteq USA,Schuylkill Haven, Pennsylvania, USAK. Nuckles Southwire Company,Carrollton, Georgia, USAB. Parmar Greater Toronto Airports Authority,Toronto, OntarioG. Passler Shawflex,Toronto, OntarioP. Petit Pawtucket, Rhode Island, USAJ. Polak Hydro One Networks Inc.,Toronto, Ontari

48、oW.F. Powers Southwire Company,Carrollton, Georgia, USAJ. Prema Shawflex,Toronto, OntarioL. Radom Magna Electric Corporation,Regina, SaskatchewanD.S. Reith Nexans Canada Inc.,Markham, OntarioR.D. Roulston Pyramid Corporation,Calgary, Alberta Canadian Standards Association Tray cablesFebruary 2009 vi

49、iV. Rowe Westbank, British ColumbiaT. Rudd Belden (Canada) Inc.,Cobourg, OntarioR. Tonelli Delco Wire and Cable Limited,Concord, OntarioA. Tsisserev City of Vancouver,Vancouver, British ColumbiaD. Wasilewski Draka Cableteq USA,Schuylkill Haven, Pennsylvania, USAE.H. Wiebe Manitoba Hydro,Winnipeg, ManitobaA. Yip Transport Canada,Toronto, OntarioL. Letea Canadian Standards Association,Mississauga, OntarioProject ManagerC22.2 No. 230-09 Canadian Standards Associationviii February 2009PrefaceThis is the second edition