CSA C22 2 NO 24-2015 Temperature-indicating and -regulating equipment (Ninth Edition).pdf

1、C22.2 No. 24-15Temperature-indicating and -regulatingequipmentLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approvedby the Standards Council of Canada. This process brings together volunteers r

2、epresenting varied viewpoints and interests to achieve consensusand develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of

3、 liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringementof

4、 any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicablestatute, rule, or regulation

5、.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL

6、 DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS

7、BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to ano

8、ther person or entity. The information in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any and all use of or reliance on the information contained in this docum

9、ent.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA

10、Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and allinventions and trade secrets that

11、may be contained in this document, whether or not such inventions and trade secrets are protected bypatents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document mayviolate laws that protect CSA Groups and/or others intellectual

12、 property and may give rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibil

13、ity that some of the elements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely their own res

14、ponsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form: load this document onto a computer for the sole purpose of re

15、viewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have suchcopies, and only if this Legal Notice appears on each such copy.In additio

16、n, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained

17、 in this Legal Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this documentconstitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update Servi

18、ceC22.2 No. 24-15January 2015Title: Temperature-indicating and -regulating equipmentTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2423215.If you requ

19、ire assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personalinformation.ISBN 978-1-77139-643-1 2015 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form

20、whatsoeverwithout the prior permission of the publisher.Published in January 2015 by CSA GroupA not-for-profit private sector organization178 Rexdale Boulevard,Toronto, Ontario, Canada M9W 1R3To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800

21、-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Temperature-indicating and-regulating equipmentC22.2 No. 24-15C22.2 No. 24-15Temperature-indicating and -regulating equipmentJanuary 2015 2015 CSA Group 1ContentsTechnical Committee on Consumer

22、and Commercial Products 5Subcommittee on Automatic Controls for Household Use 7Working Group on C22.2 No. 24 9Preface 101 Scope 122 Reference publications 123 Definitions 164 General requirements 184.1 General 184.2 Controls for specific applications 185 Construction 185.1 General 185.2 Frame and en

23、closure 195.2.1 General 195.2.2 Enclosures for transformers 205.2.3 Thickness of sheet metal enclosures 205.2.4 Thickness of enclosures made of insulating material 215.2.5 Enclosure doors and covers 215.2.6 Openings in enclosures 225.2.7 Weatherproof enclosures 235.2.8 Protection against rusting 235

24、.3 Mounting 235.4 Parts containing liquid metal 245.5 Operating mechanism and controls involving electronics 245.5.1 Operating mechanisms 245.5.2 Thermostat with marked OFF position 245.5.3 Electronic controls 255.5.4 Evaluation of safety controls 255.5.5 Safety control classification 255.5.6 Circui

25、t interfacing with safety controls 265.6 Supply connections 265.6.1 Permanently connected equipment 265.6.2 Cord-connected equipment 275.6.3 Bushings for cords 285.7 Terminal parts and leads 285.8 Electrical insulation 295.9 Current-carrying parts 305.10 Wiring 305.11 Transformers 32C22.2 No. 24-15T

26、emperature-indicating and -regulating equipmentJanuary 2015 2015 CSA Group 25.12 Capacitors 325.13 Suppressors and isolators 325.13.1 Surge suppressors 325.13.2 Optical devices 335.14 Switches 335.15 Fuses and fuseholder assemblies 335.16 Coil windings 335.17 Spacings 345.17.1 General 345.17.2 Low-v

27、oltage circuits 345.17.3 Class 2 circuits 355.17.4 Spacing on printed circuit boards 365.17.5 Creepages Materials with a known comparative track index 365.17.6 Through-air spacings Dielectric voltage-withstand test 365.17.7 Surge-controlled circuits 375.18 Separation of circuits 375.18.3 Barriers fo

28、r separation of circuits 385.18.4 Grouping of conductors 385.18.5 Grounded shielding 385.19 Assemblies secured by adhesives 395.20 Means for factory calibration of safety controls 395.21 Grounding and bonding 395.22 Power supplies 405.23 Motors 405.24 Telecommunication network equipment 405.25 Commu

29、nication applications 405.26 Temperature controls provided with a ground fault circuit interrupter 405.27 Electronic gas/air ratio controls 415.28 Thermal cut-offs 415.29 Thermistors 415.30 Room thermostats 415.31 Solar domestic hot water applications 416 Marking 417 Tests 447.1 Sequence of tests 44

30、7.2 Rated conditions 447.3 Rating 457.3.1 Open-circuit voltage 457.3.2 Input and output 457.4 Temperature 457.5 Operation 477.5.1 Electromagnets 477.5.2 Combination gravity-type tip switches and temperature-limiting thermostats 477.6 Calibration 477.7 Overload 487.8 Conditioning of safety controls 5

31、17.9 Endurance 51C22.2 No. 24-15Temperature-indicating and -regulating equipmentJanuary 2015 2015 CSA Group 37.10 Dielectric strength 537.11 Short-circuit 547.12 Snap-on covers 567.13 Impact 567.14 Flame Test 577.15 Negative bias capillary controls 577.16 Damper motors 577.17 Evaluation of coatings

32、on printed circuit wiring boards 577.17.1 General 577.17.2 Dielectric strength on printed wiring boards 577.17.3 Dielectric strength after temperature conditioning 587.17.4 Dielectric strength after humidity conditioning 587.17.5 Adhesion 587.18 Assemblies secured by adhesives 587.19 Strength of flu

33、id-containing parts 597.20 Fluid leakage 597.21 Parts containing liquid metal 607.22 Strain relief 607.23 Additional requirements for manual reset temperature-limiting controls 617.24 Dielectric voltage-withstand test in lieu of measuring spacings 617.25 Surge immunity test 627.26 Electrical fast tr

34、ansient/burst immunity test 627.27 Abnormal testing 627.28 Push/pull-and-turn controls 637.29 Leakage current 638 Requirements for extra-low-voltage thermostats with heat anticipators 648.1 Scope 648.2 Enclosures 648.3 Burnout 658.3.1 Test criteria 658.3.2 Test conditions 658.3.3 Test procedure 658.

35、4 Marking 669 Supplementary requirements for thermally activated relays and sequencers for use in electriccentral warm air furnaces 669.1 Scope 669.2 General 669.3 Initial calibration 679.4 Operation at minimum normal voltage and temperature 679.5 Positive off and extreme temperature 679.6 Operation

36、 at maximum normal temperature and overvoltage 689.7 Overload and endurance 689.8 Number of endurance operations 689.9 Recalibration 689.10 Marking 6810 Fluorescent lamp ballast protectors 69C22.2 No. 24-15Temperature-indicating and -regulating equipmentJanuary 2015 2015 CSA Group 410.1 Scope 6910.2

37、 General 6910.3 Calibration 6910.4 Endurance 6910.5 Spacings 7010.6 Limited short-circuit 7010.7 Marking 7011 Tests for single-operation devices 7011.1 General 7011.2 Reset mechanism 7011.3 Calibration test 7111.4 Refunctioning temperature test 7111.5 Conditioning test 7111.6 Refunctioning temperatu

38、re test below 0 C but not below 35 C 7111.7 Refunctioning temperature test below 35 C 7211.8 Overload test 7211.9 Dielectric strength 73Annex A (normative) Electronic gas/air ratio controls (see Clause ) 101Annex B (informative) Marking translations 109C22.2 No. 24-15Temperature-indicating and -regu

39、lating equipmentJanuary 2015 2015 CSA Group5Technical Committee on Consumer andCommercial ProductsA. Milne 21st Olympiad Sales,Burlington, OntarioCategory: General InterestChairD. Mascarenhas Brampton, OntarioCategory: General InterestVice-ChairD.P. Badry Government of Yukon,Whitehorse,YukonCategory

40、: Regulatory AuthorityG. Benjamin Thomas reference publications list in Clause 2 expanded and updated; definitions added to Clause 3; construction provisions clarified in Clauses 5.1.8 and 5.1.9; Clauses 5.2.6.11 and 5.2.6.12 expanded to clarify investigation; provisions applicable to mercury remove

41、d from Clause 5.4; Clause 5.5 revised and expanded; Clause 5.10.15 added; Clause 5.11 expanded to include additional provisions for transformers; Clause 5.12.5 added to clarify capacitors used in applications that require X and Y classifications; Clause 5.13 rewritten to define surge suppressors and

42、 optical devices; provisions applicable to mercury switches (Clauses 4.14.3 and 4.14.4 in the previous edition) deletedbecause mercury switches are no longer acceptable; new clauses added to the construction provisions in Clause 5 as follows: Clause 5.22, Power supplies; Clause 5.23, Motors; Clause

43、5.24,Telecommunication network equipment; Clause 5.25, Communication applications; Clause 5.26,Temperature controls provided with a ground fault circuit interrupter; Clause 5.27, Electronic gas/air ratio controls; Clause 5.28,Thermal cut-offs; Clause 5.29,Thermistors; and Clause 5.30, Room thermosta

44、ts; Clause 6.1(m) added; Clause 7.6.1 clarified; Clause 7.7.21 added for controls provided with manual actions; Clauses 7.9.2.1, 7.9.2.2, and 7.9.2.3 added for clarity; Clause 7.9.9 added for clarity; Clause 7.10.10 added for clarity; Clause 7.11.6 revised; Clause 7.16.4 added to address damp actuat

45、ors; Clauses7.21 revised to remove references to mercury; Clause 7.25 updated and title changed from “Transient-voltage surge suppression” to “Surgeimmunity test”; Clauses 7.26 to 7.29 added; Clause 11 added; Table 4 updated with additional tests: surge immunity, short-circuit, and abnormal; Table 6

46、 updated (Items 3, 4, and 7 to 9); Table 10 updated Items 3, 4, and 6 to 9 and Notes and ; Figure 5 corrected;C22.2 No. 24-15Temperature-indicating and -regulating equipmentJanuary 2015 2015 CSA Group 11 Figures 7 and 8 added; Annex A (normative) added; and Annex A from the previous edition renamed

47、Annex B.Permission to use extracts from ISO 23552-1:2007, Safety and control devices for gas and/or oil burnersand gas and/or oil appliances Particular requirements Part 1: Fuel/air ratio controls, electronictype, was provided by the Standards Council of Canada in cooperation with IHS Canada. No fur

48、therreproduction of this material is permitted without prior written approval from the Standards Council ofCanada.This Standard is considered suitable for use for conformity assessment within the stated scope of theStandard.This Standard was prepared by the Working Group on C22.2 No. 24 and the Subc

49、ommittee onAutomatic Controls for Household Use, under the jurisdiction of the Technical Committee on Consumerand Commercial Products and the Strategic Steering Committee on Requirements for Electrical Safety,and has been formally approved by the Technical Committee.Interpretations: The Strategic Steering Committee on Requirements for Electrical Safety has providedthe following direction for the interpretation of standards under its jurisdiction: “The literal text shall beused in judging compliance of pr