CSA C22 2 NO 243-2015 Vacuum cleaners blower cleaners and household floor finishing machines (Fifth Edition).pdf

1、C22.2 No. 243-15Vacuum cleaners, blower cleaners, and household floor finishing machinesLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process b

2、rings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standard

3、s.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantabil

4、ity, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applic

5、able statute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT

6、LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE

7、OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any

8、 duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance

9、 on the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual

10、property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrar

11、y), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws th

12、at protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this docume

13、nt.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity

14、 of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load thi

15、s document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if

16、this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do no

17、t agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms an

18、d conditions of this Legal Notice.Standards Update ServiceC22.2 No. 243-15 April 2015Title: Vacuum cleaners, blower cleaners, and household floor finishing machinesTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that

19、you will need to register for updates to this publication is 2423107.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.CSA GroupCSA C22.2 No. 243-15Fifth

20、EditionUnderwriters Laboratories Inc.UL 1017Ninth EditionVacuum Cleaners, Blower Cleaners, and Household Floor FinishingMachinesApril 13, 2015ANSI/UL 1017-2015Commitment for AmendmentsThis standard is issued jointly by the Canadian Standards Association (operating as CSA Group ), andUnderwriters Lab

21、oratories Inc. (UL). Comments or proposals for revisions on any part of the standardmay be submitted to CSA Group, or UL at anytime. Revisions to this standard will be made only afterprocessing according to the standards development procedures of CSA Group, and UL. CSA Groupand UL will issue revisio

22、ns to this standard by means of a new edition or revised or additional pagesbearing their date of issue.ISBN 978-1-77139-599-1 2015 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without theprior permission of the publisher.This Standard is subject

23、 to review ve years from the date of publication, and suggestions for itsimprovement will be referred to the appropriate committee. To submit a proposal for change, pleasesend the following information to inquirescsagroup.org and include Proposal for change in thesubject line: Standard designation (

24、number); relevant clause, table, and/or gure number; wording ofthe proposed change; and rationale for the change.To purchase CSA Group Standards and related publications, visit CSA Group s Online Store atshop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.Copyright 2015 Underwriters Laborat

25、ories Inc.UL s Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All of UL s Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standa

26、rd for Safety consists of the Ninth Edition. The most recent designation ofANSI/UL 1017 as an American National Standard (ANSI) occurred on April 13, 2015. ANSI approvalfor a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back),Preface, or Annex H.Comments or prop

27、osals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in UL s On-Line Collaborative StandardsDevelopment System (CSDS) at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- call toll-free 1-888-853-3503.CONTE

28、NTSPreface .71 Scope .92 General .102.1 Attachments 102.2 Fluids Proprietary 112.3 Instructions provided with the appliance 122.4 Secondary circuits .122.5 Units of measurement 122.6 Reference publications .123 Denitions 214 Construction .244.1 Components 244.2 Enclosures .264.3 Mechanical assembly

29、314.4 Corrosion protection .324.5 Supply connections 334.6 Current-carrying parts 404.7 Internal wiring and external interconnections 414.8 Electrical insulation 454.9 Motors .464.10 Switches, relays, and similar controls .494.11 Controls End product test parameters .534.12 Capacitors .564.13 Lampho

30、lders .574.14 Receptacles .584.15 Spacings 604.16 Grounding and bonding .634.17 Protective devices 644.18 Heating elements Vacuum with steam-cleaning attachment 664.19 Thermal links 664.20 Protection against injury to persons .665 Tests .735.1 General 735.2 Normal loads .735.3 Leakage current .775.4

31、 Leakage current following humidity conditioning .785.5 Leakage current Abnormal operating conditions .795.6 Starting current 795.7 Rating .805.8 Temperature 805.9 Severe operating conditions 825.10 Abnormal operation .825.11 Dielectric voltage-withstand test 845.12 Resistance to moisture 855.13 Sta

32、bility .975.14 Strain relief 985.15 Switches, relays, and similar controls .985.16 Cord reel exing .995.17 Power-supply cord exing 100APRIL 13, 2015 CSA C22.2 NO. 243-15 UL 1017 35.18 Internal wiring and interconnecting cord exing .1015.19 Physical abuse .1025.20 Strength of handles .1035.21 Polymer

33、ic enclosure parts 1045.22 Polymeric materials used as structural support 1095.23 Adhesives 1095.24 Thermoplastic motor insulation systems 1115.25 End-product arc resistance .1135.26 Abnormal overload 1135.27 Glow-wire end-product test .1145.28 Blower cleaner impeller tests .1145.29 Integral insulat

34、ion .1155.30 Testing of temperature control devices used in a vacuum with a steam-cleaningattachment .1165.31 Mechanical valve endurance test 1175.32 General purpose transformers 1175.33 Interlock system endurance Floor sweepers 1186 Double Insulation .1186.1 Scope 1186.2 Denitions .1196.3 Construct

35、ion general 1196.4 Reinforced insulation .1206.5 Power supply cord 1236.6 Strain relief 1236.7 Bushings 1236.8 Capacitors .1236.9 Extra-low voltage circuits .1236.10 Spacings .1236.11 Internal wiring .1236.12 Leakage-current test .1246.13 Dielectric voltage-withstand test .1256.14 Insulation resista

36、nce .1256.15 Resistance to impact test 1266.16 Abnormal operation test 1266.17 Overload test on motors .1266.18 Investigation of armature employing reinforced insulation 1276.19 Resistance to moisture test .1286.20 Manufacturing and production tests .1287 Rechargeable Battery-Powered Appliances 1288

37、 Current-carrying hoses and accessory electried wall valves .1308.1 Scope 1308.2 Construction General .1318.3 Tests General 1328.4 Dielectric voltage-withstand test 1328.5 Leakage-current test 1328.6 Oven conditioning test 1338.7 Voltage drop test .1338.8 Temperature test .1338.9 Overload test 1348.

38、10 Limited overcurrent test 1348.11 Crushing test .1358.12 Thermal shock test 1358.13 Flexing test .136APRIL 13, 2015CSA C22.2 NO. 243-15 UL 101748.14 Abrasion test .1378.15 Wet pick-up 1388.16 Endurance test .1398.17 Marking 1399 Appliances Generating Ultraviolet (UV) Radiation .1399.1 General .139

39、9.2 Construction .1409.3 Protection against injury to persons .1409.4 Performance .1429.5 Markings 1459.6 Instructions 14610 Manufacturing and Production Tests .14610.1 Dielectric voltage-withstand .14610.2 Grounding-continuity .14811 Marking 14811.1 General 14811.2 Permanence 15011.3 Details .15011

40、.4 Cautionary .15212 Instruction Manual .15612.1 General 15612.2 Instructions pertaining to a risk of re, electric shock, or injury to persons 15712.3 Grounding/double insulation instructions .16212.4 Polarization instructions 16412.5 Installation and operating instructions 16412.6 User-maintenance

41、instructions 16712.7 Proprietary uid instructions 167ANNEX A (Normative)A1 Probe Tolerances .207ANNEX B (Normative) Tab TerminalsB1 General 208B2 Material Requirements .208B3 Dimensional Requirements .208ANNEX C (Normative)C1 International Symbols 214ANNEX D (Informative) Secondary Circuits and the

42、Level of Evaluation RequiredD1 General 215D2 Class 2 Circuits .216D3 Limited Voltage/Current Circuits .217D4 Limited Voltage Circuit Requirements 218D5 Limited Energy Circuits 219APRIL 13, 2015 CSA C22.2 NO. 243-15 UL 1017 5D6 Limiting Impedance Circuits 220D7 Safety Extra-Low Voltage Circuits .222D

43、8 Secondary Circuit Tests 222D8.1 General 222D8.2 Maximum voltage .223D8.3 Maximum current test for inherently limited circuits 223D8.4 Maximum power (limited energy) test 224D8.5 Limited power point determination test .224D8.6 Power dissipation test .225D8.7 Component failure 225ANNEX E (Informativ

44、e)E1 Test Carpet and Padding Specications 227ANNEX F (Informative)F1 Flowchart For Polymeric Fluid Handling Components (PFHC) .228ANNEX G (Informative) Methods of Applying ISO 13849-1 to AppliancesG1 General 230G2 Risk Assessment 230G3 Residual Risk Analysis .230G4 Performance Levels .231ANNEX HFren

45、ch Language MarkingsThis ANNEX is provided for information onlyAPRIL 13, 2015CSA C22.2 NO. 243-15 UL 10176PrefaceThis is the harmonized CSA Group, and UL standard for Vacuum Cleaners, Blower Cleaners, andHousehold Floor Finishing Machines. It is the fth edition of CSA-C22.2 No. 243, and the ninth ed

46、ition ofUL 1017. This edition of CSA-C22.2 No. 243 supersedes the previous edition(s) published in 2010. Thisedition of UL 1017 supersedes the previous edition(s) published in 2010.This harmonized standard was prepared by the CSA Group and Underwriters Laboratories Inc. (UL). Theefforts and support

47、of the Vacuum Cleaner industry of both the USA and Canada are gratefullyacknowledged.This Standard is considered suitable for use for conformity assessment within the stated scope of theStandard.This standard was reviewed by the Integrated Committee on Electrical Motor-Operated CleaningAppliances fo

48、r Commercial Use, under the jurisdiction of the CSA Technical Committee on Consumer andCommercial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety,and has been formally approved by the CSA Technical Committee.This standard has been approved by the American Nati

49、onal Standards Institute (ANSI) as an AmericanNational Standard.Application of StandardWhere reference is made to a specic number of samples to be tested, the specied number isconsidered a minimum quantity.Note:Althoughtheintendedprimaryapplicationofthisstandardisstatedinitsscope,itisimportanttonotethatit remains the responsibility of the users of the standard to judge its suitability for their particular purpose.Level of HarmonizationThis standard is published as an identical standard for CSA Grou