CSA C22 2 NO 267-2010 Armoured segmented power and communication assembly (ASPCA) (First Edition).pdf

1、C22.2 No. 267-10Armoured segmented power and communication assembly (ASPCA)Legal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers rep

2、resenting varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabi

3、lityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any

4、 third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT

5、SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST RE

6、VENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF TH

7、E POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity.

8、The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-f

9、or-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whet

10、her it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or

11、not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/

12、or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the su

13、bject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is bein

14、g provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document

15、if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any

16、way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies

17、 of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.CSA Standards Update ServiceC22.2 No. 267-10November 2010Title:Armoured segmented power and communi

18、cation assembly (ASPCA)Pagination:27 pages (vii preliminary and 20 text), each dated November 2010To register for e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need

19、to register for updates to this publication is 2420864.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Published in November 2010 by Canadian Standards Associat

20、ionA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caC22.2 No. 267-10Armoured segmented power and communication assembly (ASPCA)CSA Standard100%ISBN 978-1-55491-491-3 Canadi

21、an Standards Association 2010All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.To purchase CSA Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-7

22、47-4044.The Canadian Standards Association (CSA) prints its publications on Rolland Enviro100, which contains 100%recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.November 2010 iiiContents Canadian Standards Association Armoured

23、 segmented power and communication assembly (ASPCA)Technical Committee on Wiring Products vIntegrated Committee on Portable and Mine Power Cable viPreface vii1Scope12 Reference publications 13 Definitions 34 Construction 34.1 General 34.2 Power conductors 34.3 Bonding conductors 44.3.1 General 44.3.

24、2 Bonding of SRS system 44.4 Insulation 44.5 Optical fiber 44.6 Coaxial cable 44.7 Mechanical strain relief system 54.8 Binder (optional) 54.9 Thermally protective layer (optional) 54.10 Armour 54.11 Overall outer jacket (optional) 54.12 Fittings 64.13 Boxes 65Marking65.1 General 65.1.1 Cables witho

25、ut an outer jacket 65.1.2 Cables with an outer jacket 65.2 Product marking 65.3 Package marking 75.4 Installation instructions 75.5 Connections and terminations 75.6 Tag marking 86 Testing 86.1 Performance tests on insulated conductors 86.1.1 Long-term insulation resistance in water 86.1.2 Long-term

26、 insulation resistance in air for 90 C rated conductors 96.1.3 Capacitance and relative permittivity 96.1.4 Conductor corrosion 96.1.5 Insulation fall-in 106.1.6 Cold bend and cold impact 106.1.7 Deformation 106.1.8 Hot-creep elongation and hot-creep set 106.1.9 Durability of ink printing 106.1.10 S

27、hrinkback 11C22.2 No. 267-10 Canadian Standards Associationiv November 20106.1.11 AC spark test 116.1.12 Insulation resistance in water at 15 C 116.1.13 Electrical continuity 116.2 Performance tests on completed cable assembly 116.2.1 Mechanical 116.2.2 Flame tests 166.2.3 Electrical tests 16Tables1

28、 Minimum size of bonding conductors 192 Test potential for spark test 193 Mandrel diameter for metal sheath flexibility test 204 Data integrity BER ratio 20 Canadian Standards Association Armoured segmented power and communication assembly (ASPCA)November 2010 vTechnical Committee on Wiring Products

29、K. Rodel Hubbell Canada,Pickering, OntarioRepresenting ManufacturersChairL. Letea Canadian Standards Association,Mississauga, OntarioProject ManagerRepresenting Regulatory AuthoritiesG. Montminy Rgie du btiment du Qubec,Qubec, QubecT. Olechna Electrical Safety Authority,Mississauga, OntarioM. Shea C

30、ity of Victoria, Victoria, British ColumbiaRepresenting ManufacturersC. Davis Electro Cables Incorporated,Trenton, OntarioP. Desilets Leviton Manufacturing of Canada Limited,Pointe-Claire, QubecB. OConnell Tyco Thermal Controls (Canada) Ltd.,Trenton, OntarioD.S. Reith Nexans Canada Inc.,Markham, Ont

31、arioRepresenting General InterestsB. Beland Sherbrooke, QubecD.H. Dunsire Winnipeg, ManitobaC. Samuels ConocoPhillips Canada Ltd.,Calgary, AlbertaT. Simmons British Columbia Institute of TechnologyBurnaby, British ColumbiaA.Z. Tsisserev Stantec ConsultingVancouver, British ColumbiaC22.2 No. 267-10 C

32、anadian Standards Associationvi November 2010Integrated Committee on Portable and Mine Power CableB.L. Fisher General Cable Industries, Inc.,Marion, Indiana, USAChairC. Choo-Wing General Cable Canada Ltd., Toronto, OntarioW.F. Constantine Draka Cableteq USA,North Dighton, Massachusetts, USAS.B. Frie

33、dman General Cable Industries, Inc.,Lincoln, Rhode Island, USAM.A. Fuller AmerCable Inc.,Beaver, Pennsylvania, USAE.J. Gagnon Electrical Cable Supply Ltd.,Edmonton, AlbertaT. Hamden CSA International,Toronto, OntarioJ. Johnson Electro Cables Inc.,Trenton, OntarioR. Kummer Southwire Company,Carrollto

34、n, Georgia, USAG. Lobay CANMET, Natural Resources Canada,Kars, OntarioN. Moubed Anixter Canada Inc.,Mississauga, OntarioI. Muller Nexans Canada Inc.,Markham, OntarioG. Patton Patton (b) provide an explanation of circumstances surrounding the actual field condition; and(c) where possible, phrase the

35、request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are published in CSAs periodical Info Update, which is available on the CSA website at http:/st

36、andardsactivities.csa.ca.(5) CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appropriate committee. To submit a proposal for change to CSA Standards, please send the following information to inquiriescsa.ca and include “Proposal for change”

37、 in the subject line:(a) Standard designation (number);(b) relevant clause, table, and/or figure number;(c) wording of the proposed change; and(d) rationale for the change. Canadian Standards Association Armoured segmented power and communication assembly (ASPCA)November 2010 1C22.2 No. 267-10Armour

38、ed segmented power and communication assembly (ASPCA)1Scope1.1This Standard specifies the construction and testing of armoured segmented power and communication assembly (ASPCA) composite cable systems suitable for emergency applications rated up to 600 V.Note: Systems can include power conductors,

39、optical fibers, coaxial cables and fittings (connectors and boxes), intended for installation in accordance with the rules of the Canadian Electrical Code, Part I, on systems having nominal voltages of 600 V or less.1.2This Standard applies to fire-resistant-rated, armoured, thermally-insulated, str

40、ain-relieved, multi-conductor, segmented, power and communications cable systems, rated up to 600 V and intended for use in industrial and commercial applications.1.3In CSA standards, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply w

41、ith the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard.Notes accompanying clauses do not include requirements or alternative requirements; the purp

42、ose of a note accompanying a clause is to separate from the text explanatory or informative material.Notes to tables and figures are considered part of the table or figure and may be written as requirements.Annexes are designated normative (mandatory) or informative (nonmandatory) to define their ap

43、plication.2 Reference publicationsThis Standard refers to the following publications, and where such reference is made, it shall be to the edition listed below, including all amendments published thereto.CSA (Canadian Standards Association)C22.1-09Canadian Electrical Code, Part IC22.2 No. 0.3-09Test

44、 methods for electrical wires and cablesCAN/CSA-C22.2 No. 0.4-04 (R2009)Bonding of electrical equipmentCAN/CSA-C22.2 No. 18.1-04 (R2009)Metallic outlet boxesC22.2 No. 267-10 Canadian Standards Association2 November 2010CAN/CSA-C22.2 No. 18.3-04 (R2009)Conduit, tubing, and cable fittingsC22.2 No. 38-

45、10Thermoset insulated wires and cablesC22.2 No. 51-09Armoured cablesCAN/CSA-C22.2 No. 94.1-07Enclosures for electrical equipment, non-environmental considerationsC22.2 No. 131-07Type TECK 90 cableC22.2 No. 210-05Appliance wiring material productsC22.2 No. 214-08Communications cablesC22.2 No. 232-09O

46、ptical fiber cablesCAN/CSA-C22.2 No. 2556-07Wire and cable test methodsT529-95 (withdrawn)Telecommunications Cabling Systems in Commercial BuildingsNEMA/ICEA (National Electrical Manufacturers Association/Insulated Cable Engineers Association)ANSI/NEMA WC 74/ICEA S-93-639-2006546 kV Shielded Power C

47、able for Use in the Transmission and Distribution of Electrical EnergyNFPA (National Fire Protection Association)262-2007Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling SpacesNRCC (National Research Council of Canada)National Building Code of Canada, 20

48、05TIA/EIA (Telecommunications Industry Association/Electronics Industries Association)568-B Series568-C:2008Optical Fiber Cabling Components StandardULC (Underwriters Laboratories of Canada)S102.4-10Standard Method for Test for Fire and Smoke Characteristics of Electrical Wiring, Cables and Non-meta

49、llic RacewaysS139-2000Standard Method of Fire Test for Evaluation of Integrity of Electrical Cables Canadian Standards Association Armoured segmented power and communication assembly (ASPCA)November 2010 33 DefinitionsThe following definitions shall apply in this Standard.Binder a mechanical restraining system designed to primarily hold the core components together during manufacture.Box special purpose metallic box meeting the requirements of CAN/CSA-C22.2 No. 94.1 with a minimum rating of 4X.Connector a connector meeting the requirements of