CSA C49 3-2010 Aluminum 1350 wire annealed and intermediate tempers for electrical purposes (Second Edition).pdf

1、C49.3-10Aluminum 1350 wire, annealed and intermediate tempers, for electrical purposesLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together vol

2、unteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusi

3、on of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringe

4、ment of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. I

5、N NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAG

6、ES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN AD

7、VISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person

8、or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a pr

9、ivate not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this doc

10、ument (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document,

11、whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right

12、in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard ma

13、y be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis docum

14、ent is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print thi

15、s document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this docum

16、ent in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make

17、 any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.CSA Standards Update ServiceC49.3-10February 2010Title: Aluminum 1350 wire, annealed and

18、 intermediate tempers, for electrical purposesPagination: 11 pages (vi preliminary and 5 text), each dated February 2010To register for e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List

19、ID that you will need to register for updates to this publication is 2420520.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Published in February 2010 by Canad

20、ian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caC49.3-10Aluminum 1350 wire, annealed andintermediate tempers, for electricalpurposesCSA Standard10

21、0%ISBN 978-1-55491-373-2Technical Editor:Tania Donovska Canadian Standards Association 2010All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.To purchase CSA Standards and related publications, visit CSAs Online Sto

22、re at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.The Canadian Standards Association (CSA) prints its publications on Rolland Enviro100, which contains 100%recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.Feb

23、ruary 2010 iiiContents Canadian Standards AssociationAluminum 1350 wire, annealed andintermediate tempers, for electrical purposesTechnical Committee on Overhead Electrical Conductors ivPreface vi1Scope 12 Reference publications 13 Definitions 14 Requirements for wire 24.1 General 24.2 Wire sizes 24

24、.3 Diameter and permissible variations 24.4 Joints 34.4.1 Joints made before final drawing 34.4.2 Joints made during final drawing or in finished wire 34.4.3 Tension test (optional) 34.5 Tensile properties 34.6 Resistivity 34.7 Density 35 Test methods 45.1 Sampling 45.2 Tensile strength 45.3 Resisti

25、vity 45.4 Retests 46 Packaging and shipping 47Markings 4AnnexesA (informative) Information to be supplied by the purchaser 5Tables1 Permissible variations in wire diameter 22 Tensile properties 3C49.3-10 Canadian Standards Associationiv February 2010Technical Committee on Overhead Electrical Conduct

26、orsJ. Duxbury Surrey, British Columbia ChairJ.M. Asselin Alcan Cable,Mississauga, OntarioVice-ChairG.C. Baker General Cable Industries, Inc.,Highland Heights, Kentucky, USAA. Cinicolo Canadian Electricity Association,Ottawa, OntarioAssociateL. de Silva Standards Council of Canada,Ottawa, OntarioAsso

27、ciateK. Dostie BC Hydro,Burnaby, British ColumbiaAssociateE. Ghannoum Outremont, QubecS. Godin Intral (b) provide an explanation of circumstances surrounding the actual field condition; and(c) be phrased where possible to permit a specific “yes” or “no” answer.Committee interpretations are processed

28、 in accordance with the CSA Directives and guidelines governing standardization and are published in CSAs periodical Info Update, which is available on the CSA Web site at www.csa.ca. Canadian Standards AssociationAluminum 1350 wire, annealed andintermediate tempers, for electrical purposesFebruary

29、2010 1C49.3-10Aluminum 1350 wire, annealed and intermediate tempers, for electrical purposes1Scope1.1This Standard covers the electrical and mechanical characteristics of aluminum 1350 wire, in annealed and intermediate tempers, for stranding into conductors or for use as solid single conductors.1.2

30、In CSA Standards, “shall“ is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should“ is used to express a recommendation or that which is advised but not required; “may“ is used to express an option or that which is permissi

31、ble within the limits of the standard; and “can“ is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to ta

32、bles and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.2 Reference publicationThis Standard refers to the following publication, and where such reference i

33、s made, it shall be to the edition listed below, including all amendments published thereto.CSA (Canadian Standards Association)CAN/CSA-C60889-03 (R2007)Hard-drawn aluminum wire for overhead line conductors3 DefinitionsThe following definitions shall apply in this Standard:Lot all reels or coils of

34、wire of the same diameter that are produced(a) at the same location;(b) under the same manufacturing conditions; and(c) during the same time period.Temper designations 1350-0 temper a designation for wire that has been drawn or rolled to final size and then heat treated to its lowest-strength temper

35、 to improve ductility and remove the effects of cold working.C49.3-10 Canadian Standards Association2 February 2010H temper a property of wire whose strength is increased by strain hardening through cold working in a drawing operation.Notes: (1) The “H” is always followed by two digits. The first di

36、git following the “H” indicates the specific combination of further operations, as follows:(a) H1 Strain hardening only, without supplementary thermal treatment; and(b) H2 Strain hardened an d then partially annealed.(2) The second digit following the “H” indicates the final degree of strain hardeni

37、ng. The range is from “0” (fully annealed) to “9” (fully hard). The following are common tempers:(a) “0“ fully annealed;(b) “2“ 1/4 hard;(c) “4“ 1/2 hard;(d) “6“ 3/4 hard;(e) “8“ fully hard; and(f) “9“ fully hard, exceeding fully hard temper “8“ by 14 MPa.Intermediate temper the range of tempers bet

38、ween fully annealed “0“ and fully hard “9“.Notes: (1) Intermediate temper includes 1/4, 1/2, and 3/4 hard tempers.(2) For example, “H26“ is a strain-hardened wire produced through cold working with subsequent heat treatment to a final temper of 3/4 hard.4 Requirements for wire4.1 GeneralThe wire sha

39、ll be free from all imperfections not consistent with good manufacturing practice.4.2 Wire sizesWire sizes shall be expressed as the diameter of the wire in millimetres, measured to the nearest 0.01 mm.4.3 Diameter and permissible variations4.3.1The diameter of the wire shall not vary from its nomin

40、al diameter by more than the amount specified in Table 1.Table 1Permissible variations in wire diameter(See Clause4.3.1.)4.3.2The diameter of the wire shall be determined in accordance with the method specified in Clause 5 of CAN/CSA-C60889.For the purpose of verifying compliance with this requireme

41、nt, the diameter shall be determined by taking two measurements at right angles at the same cross-section.Nominal diameter, mm Tolerance3.00 0.03 mm3.00 1% Canadian Standards AssociationAluminum 1350 wire, annealed andintermediate tempers, for electrical purposesFebruary 2010 34.4 Joints4.4.1 Joints

42、 made before final drawingJoints may be made in rods and wire before final drawing, in accordance with good manufacturing practice.4.4.2 Joints made during final drawing or in finished wireJoints may be made during final drawing or in the finished wire by(a)electric butt welding;(b) electric butt co

43、ld-upset welding; or (c) cold pressure welding.Not more than two such joints shall be present in any reel or coil of the nominal specified weight.4.4.3 Tension test (optional)Joints as permitted in Clause 4.4.2 may be subjected to tension tests. When such tests are performed, the minimum tensile req

44、uirements specified in Table 2 shall be met.Note: Sampling is subject to agreement between the purchaser and the manufacturer.4.5 Tensile propertiesThe wire shall conform to the requirements specified in Table 2.Table 2Tensile properties(See Clauses4.4.3 and 4.5.)4.6 ResistivityThe volume resistivit

45、y of the wire shall not exceed the following:(a)for annealed temper: 27.899 mm2/km (corresponding to 61.8% IACS) at 20 C; and(b) for all other tempers: 28.265 mm2/km (corresponding to 61.0% IACS) at 20 C.Note: IACS International Annealed Copper Standard.4.7 DensityFor the purpose of calculating valu

46、es such as weights or cross-sections, the density of aluminum shall be taken as 2705 kg/m3at 20 C.TemperTensile temper designationsTensile strength of wires,MPaMinimum tensile strength of joints,MPaMinimum Maximum1350-0 Fully annealed 60 95 601350-H12 or -H22 1/4 hard 85 120 751350-H14 or -H24 1/2 h

47、ard 100 135 751350-H16 or -H26 3/4 hard 115 150 751350-H18 Fully hard 145 200 75Note: For the purpose of determining conformance with these requirements, each calculated value of tensile strength shall be rounded off to the nearest MPa.C49.3-10 Canadian Standards Association4 February 20105 Test met

48、hods5.1 SamplingSamples for test purposes shall be taken from the outer ends of not less than 10% of reels or coils but from not fewer than five reels or coils (or the entire lot if the lot is smaller than five reels or coils).5.2 Tensile strengthThe tensile strength of the wire shall be tested usin

49、g the apparatus and method specified in Clause 10.1 of CAN/CSA-C60889.5.3 ResistivityThe electrical resistivity of the wire shall be determined in accordance with Clause 11 of CAN/CSA-C60889.5.4 Retests5.4.1When a sample from any reel or coil is tested, and the results do not comply with the requirements of this Standard, two additional samples shall be taken from the same reel or coil. Both of these samples shall meet the requirements. If these samples do not meet the requirements, the lot from which they are selected sha