CSA C900 3-2006 Heat meters - Part 3 Data exchange and interfaces (First Edition).pdf

1、C900.3-06(EN 1434-3:1997)(reaffirmed 2011)Heat meters Part 3: Data exchange and interfacesLegalNoticeforStandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by theStandards Council of Canada. This process brings together vol

2、unteers representing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion

3、 of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, withoutlimitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or itsnon-infringement

4、 of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of anyof the information published in this document. CSA makes no representations or warranties regarding this documents compliance withany applicable statute, rule, or regulation.IN NO EV

5、ENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES,HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST

6、REVENUE, BUSINESSINTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO ORPOSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE

7、 POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS,COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The

8、 information in this document isdirected to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibilitywhatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA is a private not-for-pro

9、fit company that publishes voluntary standards and related documents. CSA has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA and the users of this document (whether it b

10、e in printed or electronic form), CSA is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), andall inventions and trade secrets that may be contained in this document, whether or not such i

11、nventions and trade secrets are protectedby patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this documentmay violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to

12、 seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectualproperty rights in this document.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The

13、user of this document is authorized to doonly the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document.Limited copies of this document in print or paper form may be distribu

14、ted only to persons who are authorized by CSA to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authoriz

15、ation from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do make such copies, you are required to destroy them immedi

16、ately. Use of thisdocument constitutes your acceptance of the terms and conditions of this Legal Notice.Published in September 2006 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-40

17、44Visit our Online Store at www.ShopCSA.caC900.3-06(EN 1434-3:1997)Heat meters Part 3: Data exchange and interfacesCSA StandardC900.3-06 Heat meters Part 3: Data exchange and interfacesCSA/2 Canadian Standards Association September 2006C900.3-06Heat meters Part 3: Data exchange and interfacesCSA Pre

18、faceThis is the first edition of CSA C900.3, Heat meters Part 3: Data exchange and interfaces, which is an adoption without modification of the identically titled CEN (European Committee for Standardization) Standard EN 1434-3 (first edition, 1997-02). This Standard is considered suitable for use fo

19、r conformity assessment within the stated scope of the Standard.This Standard was reviewed for Canadian adoption by the CSA Technical Committee on Thermal Energy Meters, under the jurisdiction of the Strategic Steering Committee on Performance, Energy Efficiency, and Renewables, and has been formall

20、y approved by the Technical Committee. A list of the members of the Technical Committee is available upon request.September 2006 Canadian Standards Association 2006All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission ofthe publisher.

21、CEN material is reprinted with permission.Inquiries regarding this CSA Standard should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000www.csa.caTo purchase CSA Standards and related publications, visit CSAs On

22、line Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.Page 3 EN 1434-3: 1997 Foreword This draft European Standard has been prepared by Technical Committee CENITC 176 “Heat meters“, the secretariat of which is held by DS. The other parts are: Part I - General requirements Par

23、t 2 - Constructional requirements Part 4 - Pattern approval tests Part 5 - Initial verification tests Part 6 - Heat meter installation, commissioning, operational monitoring and maintenance This European Standard shall be given the status of a national standard, either by publication of an identical

24、 text or by endorsement, at the latest by August 1997, and conflicting national standards shall be withdrawn at the latest by August 1997. According to the CENICENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:

25、 Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 1 Scope This European standard applies to heat meters, that is to instruments intended for measuring the heat which, in

26、 a heat-exchange circuit, is absorbed or given up by a liquid called the energy-conveying liquid. The meter indicates heat in legal units. Electrical safety requirements are not covered by this standard. Part 3 specifies the data exchange between a meter and a read-out device (POINT / POINT communic

27、ation). For these applications using the optical readout head and the CL interface, the EN 61 107 protocol is recommended. Further stipulations are set out for the data communication between several meters and one master unit in a local network (MULTI-POINT communication). This can be done with a fe

28、w meters with a hand held master unit by using the inductive interface on the Meter-Bus (in the following called the M-Bus). For bigger networks with up to 250 meters, a master unit with AC mains supply is necessary to control the M-Bus. For these applications a protocol according to EN 60870-5 is recommended. CSA C900.3-06