CSA C900 5-2006 Heat meters - Part 5 Initial verification tests (First Edition).pdf

1、C900.5-06(reaffirmed 2011)Heat meters Part 5: Initial verification testsLegalNoticeforStandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by theStandards Council of Canada. This process brings together volunteers representi

2、ng varied viewpoints and interests to achieve consensusand develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis

3、document is provided without any representations, warranties, or conditions of any kind, express or implied, including, withoutlimitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or itsnon-infringement of any third part

4、ys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of anyof the information published in this document. CSA makes no representations or warranties regarding this documents compliance withany applicable statute, rule, or regulation.IN NO EVENT SHALL CSA, ITS

5、 VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES,HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESSI

6、NTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO ORPOSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SU

7、CH DAMAGES, INJURY, LOSS,COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The information in th

8、is document isdirected to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibilitywhatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA is a private not-for-profit company that p

9、ublishes voluntary standards and related documents. CSA has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or el

10、ectronic form), CSA is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), andall inventions and trade secrets that may be contained in this document, whether or not such inventions and trad

11、e secrets are protectedby patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this documentmay violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legalredress

12、 for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectualproperty rights in this document.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this docum

13、ent is authorized to doonly the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document.Limited copies of this document in print or paper form may be distributed only to person

14、s who are authorized by CSA to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or

15、.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this

16、document constitutes your acceptance of the terms and conditions of this Legal Notice.CSA Standards Update ServiceC900.5-06September 2006Title: Heat meters Part 5: Initial verification testsPagination: 17 pages (CSA/1CSA/3 and 14 text)To register for e-mail notification about any updates to this pub

17、licationgo to www.shop.CSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2019395.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privac

18、y at www.csagroup.org/legal to find out how we protect your personal information.Blank pagePublished in September 2006 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our O

19、nline Store at www.ShopCSA.caC900.5-06Heat meters Part 5: Initial verification testsCSA StandardC900.5-06 Heat meters Part 5: Initial verification testsCSA/2 Canadian Standards Association September 2006C900.5-06Heat meters Part 5: Initial verification testsCSA PrefaceThis is the first edition of CS

20、A C900.5, Heat meters Part 5: Initial verification tests, which is an adoption, with Canadian deviations, of the identically titled CEN (European Committee for Standardization) Standard EN 1434-5 (first edition, 1997-02), including amendment A1:2002. This Standard is considered suitable for use for

21、conformity assessment within the stated scope of the Standard.This Standard was reviewed for Canadian adoption by the CSA Technical Committee on Thermal Energy Meters, under the jurisdiction of the Strategic Steering Committee on Performance, Energy Efficiency, and Renewables, and has been formally

22、approved by the Technical Committee. A list of the members of the Technical Committee is available upon request.September 2006 Canadian Standards Association 2006All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission ofthe publisher. CE

23、N material is reprinted with permission. Inquiries regarding this CSA Standard should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000www.csa.caTo purchase CSA Standards and related publications, visit CSAs Onl

24、ine Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.C900.5-06 Heat meters Part 5: Initial verification testsSeptember 2006 Canadian Standards Association CSA/3Canadian deviations5.2 Temperature sensor pair5.2.1 Error in temperature differenceReplace the second paragraph with

25、 the followingThe immersion depth of the sensor under test shall be at least 90% of the total length.Blank pageBlank pageEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1434-5:1997/A1September 2002ICS 17.200.10English versionHeat meters - Part 5: Initial verification testsCompteurs dnergie thermiq

26、ue - Partie 5: Essais devrification primitiveWrmezhler - Teil 5: ErsteichungThis amendment A1 modifies the European Standard EN 1434-5:1997; it was approved by CEN on 1 July 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

27、 thisamendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning suchnational standards may be obtained on application to the Management Centre or to any CEN member.This amendment exists in three official versions (English, French,

28、 German). A version in any other language made by translation under theresponsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, F

29、inland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Bru

30、ssels 2002 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1434-5:1997/A1:2002 EEN 1434-5:1997/A1:2002 (E)2ContentspageForeword3Introduction .41 Amended clauses 4EN 1434-5:1997/A1:2002 (E)3ForewordThis document (EN 1434-5:1997/A1:200

31、2) has been prepared by Technical Committee CEN/TC 176 “Heatmeters“, the secretariat of which is held by DS.This Amendment to the European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by March 2003, and conflict

32、ing national standards shall bewithdrawn at the latest by March 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this Amendment to the European Standard: Austria, Belgium, Czech Republic,Denmark, Finland, Fr

33、ance, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United Kingdom.EN 1434-5:1997/A1:2002 (E)4IntroductionThis amendment to EN 1434-5 is divided into 2 main areas. The first being the new clauses i.e. clauses which areno

34、t present in the 1997 version. The second being the amended clauses, where the entire clause not only thechanges is presented.It has been prepared in such a way that it can be cut and pasted into the old version.A new descriptor has been added: cooling meters.1 Amended clausesNEW TEXT1 ScopeThis Eur

35、opean Standard applies to heat meters, that is to instruments intended for measuring the heat which, in aheat-exchange circuit, is absorbed or given up by a liquid called the heat-conveying liquid. The heat meterindicates the quantity of heat in legal units.Electrical safety requirements are not cov

36、ered by this standard.Pressure safety requirements are not covered by this standard.Surface mounted sensors are not covered by this standard.Part 1 specifies general requirements.NEW TEXT5.1 Flow sensorsThe verification of the flow sensor shall be carried out within each of the following flow-rate r

37、anges at a watertemperature of (50 5) C for heating applications and (15 5) C for cooling applicationsa) qiq 1,1 qib) 0,1 qpq 0,11 qpc) 0,9 qpq 1,0 qpIf the pattern approval certificate so provides, the verification may be carried out with cold water in accordance withthe procedures laid down in the

38、 certificate.When testing the flow sensors, the guidelines in the pattern approval certificate shall be followed (e.g. requirementsfor water conductivity, water temperature, straight inlet/outlet tubes etc.).EN 1434-5:1997/A1:2002 (E)5NEW TEXT5.2.1 Error in temperature differenceThe individual tempe

39、rature sensors of the temperature sensor pair shall be tested, without their pockets, in thesame temperature bath at temperatures within each of the three temperature ranges in Table 1.Table 1 - Test temperature rangesNo.For minTest temperature rangeHeating Cooling1 20 C minto min+ 10 K 0 to 10 C20

40、C 35 to 45 C2 All min75 to 85 C 35 to 45 C3 All minmax- 30 K to max75 to 85 CNOTE If specified in the pattern approval certificate, variations in the temperatureranges and the number of temperatures are permissibleThe immersion depth of the temperature sensors shall not be less than the minimum imme

41、rsion depth.The determined resistance values shall be used in a system of three equations to calculate the three constants ofthe temperature/resistance equation of EN 60751 and a curve shall be drawn through the three test points.Thereby the characteristic curve for the temperature sensor is known.T

42、he “ideal“ curve using the standard constants of EN 60751, shall be generated. To give the error at anytemperature, the “ideal“ curve shall be subtracted from the characteristic curve for each temperature sensor.As a further step, the worst case error of the temperature sensor pair shall be determin

43、ed over the temperaturerange and over the temperature difference range specified for the sensors.For return temperatures above 80 C, only temperature differences over 10K shall be taken into account.The error determined as described above shall be within the limits stated in 9.2.2.2 of EN 1434-1:199

44、7.When measuring resistance, the current shall be such, that the power dissipation does not exceed 0,2 mW RMS.NEW TEXT5.3 CalculatorThe calculator shall be tested, at least within each of the following temperature difference ranges:For heating applications:a) min1,2 minb) 10 K 20 Kc) max- 5 K maxEN

45、1434-5:1997/A1:2002 (E)6For cooling applications:a) min1,2 minb) 0,8 maxmax but 15 KThe simulated flow rate signal shall not exceed the maximum acceptable by the calculator.The return temperature shall be in the temperature range between 40 C and 70 C for heating applications and(20 5) C for cooling

46、 applications, if not otherwise stated in the pattern approval certificate.To enable rapid testing of the calculator, it is customary to by-pass the indicating device of the heat meter.However, for at least one test, the meters indicating device shall be included.NEW TEXT5.6 Complete meterThe verifi

47、cation of the complete meter shall be carried out, at least within each of the following rangesFor heating applications:a) min1,2 minand 0,9 qp q qpb) 10 K 20 K and 0,1 qp q 0,11 qpc) max- 5 K maxand qi q 1,1 qiFor cooling applications:a) min1,2 minand 0,9 qp q qpb) max- 5 K maxand qi q 1,1 qiThe re

48、turn temperature shall be in the temperature range between 40 C and 70 C for heating applications and(20 5) C for cooling applications, if not otherwise stated in the pattern approval certificate.I consent to CSA collecting and using the above information to facilitate the collection of my suggestio

49、ns and comments. Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Jaccepte que la CSA conserve et utilise les renseignements ci-dessus afin de faciliter la rception de mes suggestions et commentaires.Consultez la politique CSA en matire de confidentialit au www.csagroup.org/legal pour savoir comment nous protgeons vos renseignements personnels.Nhsitez pas nous faire part de vos suggestions et de vos commentaires.