CSA CAN3-Z107 54-M85-1985 Procedure for Measurement of Sound and Vibration Due to Blasting Operations (First Edition General Instruction No 1).pdf

1、National Standard of Canada CAN3-ZlO 7.54-M85 (Reaffirmed 2001) Procedure for Measurement of Sound and Vibration Due to Blasting Operations Prepared by Canadian Standards Association Approved by Standards Council of Canada ISSN 031 7-5669 Published in September, 1985 by Canadian Standards Associatio

2、n, 178 Rexdale Boulevard, Rexdale (Toronto), Ontario, Canada M9W 1R3. Copyright Canadian Standards Association-1985 All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior permission of the publisher. The Canad

3、ian Standards Association, which operates under the name CSA International (CSA), under whose auspices this National Standard has been produced, was chartered in 191 9 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, vo

4、luntary membership association engaged in standards development and certification activities. and users - including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by munic

5、ipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associati

6、ons objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. in

7、support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark. Toronto, CSA has regional branch offices in major centres across Canada and ins

8、pection and testing agencies in eight countries. Since 191 9, the Association has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and

9、services through the use of standards, certification and related services to meet national and international needs. For further information on CSA services, write to CSA International 178 Rexdale Boulevard Toronto, Ontario, M9W 1 R3 Canada CSA standards reflect a national consensus of producers Indi

10、viduals, companies, and associations across Canada The Association offers certification and testing services In addition to its head office and laboratory complex in The Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous org

11、anizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare

12、of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international cooperation in the field of standards. has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of c

13、apable individuals whose collective interests provide to the greatest practicable extent a balance of representation of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant an

14、d timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the

15、 continuing responsibility of the accredited standards-development organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest editi

16、on from the organization preparing the standard. The responsibility for approving National Standards of Canada rests with the Standards Council of Canada 45 OConnor Street, Suite 1200 Ottawa, Ontario, K1 P 6N7 Canada A National Standard of Canada is a standard which CSA IN T E R N AT IO N A 1 / 1 Le

17、s normes nationales du Canada sont publiees en versions franqaise et anglaise. Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users to judge its suitability for their particular purpose. I General I

18、nstruction No. 1 CAN3-ZlO 7.54-M85 September, 1985 CSA Standard CAN3-Z107.54-M85, Procedure for Measurement of Sound and Vibration Due to Blasting Operations, consists of 13 pages, each dated September, 1985. This Standard, like all CSA Standards, is subject to periodical review, and amendments in t

19、he form of replacement pages may be issued from time to time; such pages will be mailed automatically to those purchasers who complete and return the attached card.* Some Standards require frequent revision between editions, whereas others require none at all. It is planned to issue new editions of

20、the Standard, regardless of the amount of revision, at intervals not greater than 5 years. Except in unusual circumstances, replacement pages will not be issued during the last year of that edition. *This card will appear with General Instruction No. 1 only. it is for the purchaser to insert them wh

21、ere they apply. The responsibility for ensuring that his or her copy is complete rests with the holder of the Standard, who should, for the sake of reference, retain those pages which have been replaced. Note: A General Instruction sheet will accompany replacement pages each time they are issued and

22、 will list the latest date of each page of the Standard. Although any replacement pages that have been issued will be sold with the Standard, Cut along dotted line. . : Name Organization : Address : City : Prov./State : Postal/Zip Code CAN3-2107.54-M85 : Country CSA Standard . . Place Stamp Canadian

23、 Standards Association Consolidated Mailing List 178 Rexdale Blvd. Rexdale (Toronto J, Ontario M?W 1R3 Contents Technical Committee on Acoustics and Noise Control Preface 7 1. Scope 9 2. Definitions 9 3. Reference Publications 9 4. Sound 9 4.1 Instrumentation 9 4.2 Measurement Location 70 4.3 Use of

24、 Instrumentation 70 4.4 Instrument Configuration 70 4.4.1 Reflective Surfaces 70 4.4.2 Microphone Orientation 70 4.5 Measurements 70 4.6 Weather Conditions 70 4.6.1 Wind 70 4.6.2 Humidity 70 4.6.3 Precipitation 70 4.6.4 Temperature 77 5. Vibration 77 5.1 Instrumentation 7 7 5.1.1 Vibration Detector

25、77 5.1.2 Calibrator 77 5.2 Use of Instrumentation 77 5.2.1 Calibration 7 7 5.2.2 Battery Check 7 7 5.3 Instrument Configuration 77 5.3.1 Mounting 77 5.3.2 Transducer Orientation 7 7 5.4 Measurements-Peak Particle Velocity 7 7 6. Report 72 Bibliography 73 4 Procedure for Measurement of Sound and Vibr

26、ation Due to Blasting Operations September, 1985 3 Technical Committee Technical Committee on Acoustics and Noise Control J.D. Quirt D.A. Benwell L.D. Bergsten A.J. Brammer B. Brownlee J.E. Coulter A.T. Edwards* T.F.W. Embleton* G. Faulkner S.E. Forshaw M.J. Frost H. Gidamy J.R. Hemingway T. Howarth

27、 R.B. Johnston H.W. Jones T. Kelsall National Research Council of Canada, Ottawa, Ontario Health and Welfare Canada, Ottawa, Ontario Caterpillar Tractor Co., Peoria, Illinois, USA National Research Council of Canada, Ottawa, Ontario Chairman Alternate LEQ Measurements Limited, Brampton, Ontario Barm

28、an, Coulter, Swallow Associates, Rexdale, Ontario Ontario Hydro, Toronto National Research Council of Canada, Ottawa, Ontario University of Alberta, Edmonton Department of National Defence, Downsview, Ontario Canadian Pulp and Paper Association, Montreal, Quebec Ontario Ministry of the Environment,

29、Toronto Decoustics Limited, Rexdale, Ontario Industrial Accident Prevention Association, Toronto, Ontario Electro-Medical Instrument Co., Oakville, Ontario Associate Associate Associate Associate Technical University of Nova Scotia, Halifax Hatch Associates Ltd., Toronto, Ontario Alternate 4 CAN3-Z1

30、07.54-M85 September, 1985 Technical Committee P. Koziol A.D. Lightstone J.F.W. MacKay D. McVittie T.D. Northwood E.O. Nyborg G. Perreault G.S. Perry A. Pighin Z.F. Reif S. Roger L.T. Russell M.J. Savich C.W. Sherry J.P. Stoner F.E. Toole E.R. Welbourne* D.L.M. Williams Mines Accident Prevention Asso

31、ciation, Associate Ontario, North Bay Valcoustics Canada Ltd., Willowdale, Ontario Manitoba Department of Labour and Manpower, Winnipeg Construction Safety Association of Ontario, Toronto Ottawa, Ontario Industrial Technology Centre, Winnipeg, Manitoba Commission de la sante et de la securite du tra

32、vail, Trois-Rivieres, Quebec Bruel and Kjaer Canada Ltd., Pointe Claire, Quebec Labour Canada, Ottawa, Ontario University of Windsor, Windsor, Ontario Consumers Association of Canada, Ottawa, Ontario Nova Scotia Technical College, Halifax Canada Centre for Mineral and Energy Technology, Elliot Lake,

33、 Ontario Domtar Inc., Senneville, Quebec Biotechnics Instrumentation Ltd., Burlington, Ontario National Research Council of Canada, Alternate Ottawa, Ontario Transport Canada, Ottawa, Ontario HBtel-Dieu Hospital, Kingston, Ontario Associate Associate Associate Alternate Procedure for Measurement of

34、Sound and Vibration Due to Blasting Operations September, 1985 5 Technical Committee K. Wilson Fiberglas Canada Inc., Toronto, Ontario J.J. Wojcik J.B. Watson Canadian Standards Association, Aprel Industrial Acoustics Ltd., Nepean, Ontario Rexdale, Ontario Associate Standards Administrator, Nonvotin

35、g *Former member. The following members of the Subcommittee on Industry Noise made valuable contribution to the development of the Standard: C.W. Sherry W. Atkinson A. Behar C.W. Bradley T.F.W. Embleton H.W. Jones T. Kelsall D. Lambert A.L. McAnuff G.E. Menzies P. Mundie M.M. Osman L.T. Russell B.V.

36、 Seshagiri Domtar Inc., Chairman Senneville, Quebec General Motors Transmission Plant, Windsor, Ontario Ontario Hydro, Pickering William Bradley and Associates, Montreal, Quebec National Research Council of Canada, Ottawa, Ontario Technical University of Nova Scotia, Halifax Hatch Associates Ltd., T

37、oronto, Ontario Kirkland, Quebec VME Associates Ltd., Rexdale, Ontario Stelco Inc., Hamilton, Ontario Montreal, Quebec Ontario Hydro, Toronto, Ontario Nova Scotia Technical College, Halifax Ontario Ministry of Labour, Ottawa 6 CAN3-2107.54-M85 September, 1985 Preface This is the first edition of CSA

38、 Standard CAN3-Z107.54, Procedure for Measurement of Sound and Vibration Due to Blasting Operations, forming part of the CSA 2107 Series of Standards on Acoustics and Noise Control. This Standard was prepared as a result of the concerns of the industry, regulatory authorities, and others about the v

39、ariety of techniques used to measure the effects of blasting. It represents a cross-section of the thinking and practices of experts in acoustics who have carried out blasting measurements. At the time this Standard was being prepared, there were no known consensus standards on this subject. when ne

40、cessary for the construction of subways, ditches, drainage pipes, etc, or the quarrying of stone. These measurements allow those interested to determine if regulatory limits are being exceeded or if the vibrations are low enough to prevent structural damage. This Standard was prepared with the Subco

41、mmittee on Industry Noise by the Technical Committee on Acoustics and Noise Control, and was formally approved by this Committee and the Standards Steering Committee on Miscellaneous Subjects. It has been approved as a National Standard of Canada by the Standards Council of Canada. September, 1985 N

42、ote: Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the user of the Standard to judge its suitability for his or her particular purpose. CSA Standards are subject to periodical review and suggestions fo

43、r their improvement will be referred to the appropriate committee. All enquiries regarding this Standard, including requests for interpretation, should be addressed to Canadian Standards Association, Standards Division, 178 Rexdale Boulevard, Rexdale (Toronto), Ontario M9W 1 R3. Requests for interpr

44、etation should (a) define the problem, making reference to a specific Clause, and, where appropriate, include an illustrative sketch; (b) provide an explanation of circumstances surrounding the actual field condition; and (c) be phrased, where possible, to permit a specific “yes” or “no” answer. sam

45、ple copy, write to CSA Business Development Group or telephone (416) 747-4019. This Standard is intended for those who are required to measure the effects of blasting Interpretations are published in “CSA Information Update”. For subscription details and a free Procedure for Measurement of Sound and

46、 Vibration Due to Blasting Operations September, 1985 7 8 CAN3-Z107.54-M85 September, 1985 Scope-Definitions-Reference Publications-Sound CAN3-ZIO 7.54-M85 Procedure for Measurement of Sound and Vibration Due to Blasting Operations 1. Scope 1.1 This Standard covers the procedures for the measurement

47、 of airborne sound (Clause 4) and ground-borne vibration (Clause 5) from blasting such as construction and quarrying. Note: evaluation of the frequency content of the vibration, to be sure it falls within the limits of this Standard as given in Clause 5.1.1. This Standard should not be used for meas

48、urements of blasts underground without a full 2. Definitions 2.1 Definitions required for this Standard shall be found in CSA Standard 2107.0. 3. Reference Publications 3.1 This Standard refers to the following publications, and where such reference is made it shall be to the editions listed below,

49、including all amendments published thereto. CSA Standard Definitions of Common Acoustical Terms Used in CSA Standards. ANSI* Standard Specification for Sound Level Meters. IECt Publication Sound Level Meters. *American National Standards Institute. tlnternational Electrotechnical Commission. 2107.0-1984 S1.4-1983, 651-1979, 4. Sound 4.1 Instrumentation 4.1.1 The following instrumentation shall be used: (a) a peak pressure level detector (sound level meter) that meets or exceeds the Type 1 requirements of ANSI Standard S1.4 or IEC Publication 651; (b) a microphone windscreen that conf