CSA T568 2-5-2005 Commercial building telecommunications cabling standard Part 2 Balanced twisted-pair cabling components Addendum 5 Corrections to TIA EIA-568-B 2 (First Editio.pdf

1、 T568.2-5-05(ANSI/TIA-568-B.2-5-2003)Commercial building telecommunications cabling standard Part 2: Balanced twisted-pair cabling components Addendum 5 Corrections to TIA/EIA-568-B.2CSA Standard T568.2-5-05 (ANSI/TIA-568-B.2-5-2003) Commercial building telecommunications cabling standard Part 2: Ba

2、lanced twisted-pair cabling components Addendum 5 Corrections to TIA/EIA-568-B.2 Published in May 2005 by Canadian Standards Association A not-for-profit private sector organization 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044 Visit our Online Store a

3、t www.ShopCSA.ca Commercial building telecommunications cabling standard Part 2: Balanced twisted-pair cabling components T568.2-5-05 Addendum 5 Corrections to TIA/EIA-568-B.2 CSA/2 Canadian Standards Association May 2005 T568.2-5-05 Commercial building telecommunications cabling standard Part 2: Ba

4、lanced twisted-pair cabling components Addendum 5 Corrections to TIA/EIA-568-B.2 CSA Preface This is the first edition of CSA T568.2-5, Commercial building telecommunications cabling standard Part 2: Balanced twisted-pair cabling components Addendum 5 Corrections to TIA/EIA-568-B.2. This Standard is

5、 an adoption of the identically titled ANSI/TIA (American National Standards Institute/ Telecommunications Industry Association) Standard 568-B.2-5-2003 and is the product of the Telecommunications Industry Association TR-42 Technical Committee, which included a number of Canadian members in order t

6、o ensure that Canadian perspectives and requirements were addressed. It is written in SI (metric) units with yard/pound (imperial) units in parentheses. This Standard has been adopted with no technical deviations. Where code requirements or regulations necessitate changes from US to Canadian referen

7、ces, they should be made by the user, as follows: (a) Throughout this Standard, replace the term “American” with “Canadian”, as applicable. (b) Throughout this Standard, replace the term “state” with “provincial or territorial”, as applicable. (c) Throughout this Standard, replace “NEC” with “CE Cod

8、e, Part I” (Canadian Electrical Code), as applicable. In addition, (i) where reference is made to “conduit”, replace it with “conduit/EMT” (electrical metallic tubing) because, in accordance with the Canadian Electrical Code, Part I, EMT is not considered a type of conduit; and (ii) the definitions

9、of the following terms are to be taken from the Canadian Electrical Code, Part I: “Bonding”, “Ground”, and “Raceway”. (d) Throughout this Standard, where reference is made to “FCC”, replace it with “CRTC” (Canadian Radio-television and Telecommunications Commission), or “Industry Canada”, as applica

10、ble. (e) The following Standard, published by the Canadian Standards Association, is an adoption of a TIA/EIA Standard. The requirements of this CSA Standard take precedence over the TIA/EIA Standard on which it is based; any reference in CSA T568.2-5 to the TIA/EIA Standard is to be replaced by a r

11、eference to the equivalent Canadian Standard: T568.2-05, Commercial building telecommunications cabling standard Part 2: Balanced twisted-pair cabling components. (f) Throughout this Standard, replace the term “Listed” with “Approved as applied to electrical equipment”. This Standard was reviewed fo

12、r Canadian adoption by the CSA Technical Committee on Telecommunications Wiring Systems, under the jurisdiction of the Strategic Steering Committee on Information and Communications Technology, and has been formally approved by the Technical Committee. A list of the members of the Technical Committe

13、e is available upon request. Commercial building telecommunications cabling standard Part 2: Balanced twisted-pair cabling components T568.2-5-05 Addendum 5 Corrections to TIA/EIA-568-B.2 May 2005 Canadian Standards Association CSA/3 May 2005 Canadian Standards Association 2005 All rights reserved.

14、No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. TIA material is reprinted with permission. Inquiries regarding this CSA Standard should be addressed to Canadian Standards Association 5060 Spectrum Way, Suite 100, Mississauga, Ontari

15、o, Canada L4W 5N6 1-800-463-6727 416-747-4044 www.csa.ca TIA STANDARD ANSI/TIA-568-B.2-5-2003 Approved: January 16, 2003 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components Addendum 5 Corrections to TIA/EIA-568-B.2 TIA-568-B.2-5 (Addendum No. 5 to

16、 TIA/EIA-568-B.2) January 2003 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings

17、 between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclu

18、de any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publicati

19、ons are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. Further details of the developm

20、ent process are available in the TIA Engineering Manual, located at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of th

21、is Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-4426-AD5, formulated under the cognizance of the TIA TR-42.7 Subcommittee on Telecommunications Copper Cabling Systems.) Publis

22、hed by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2003 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. All rights reserved NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed (the “Document”) has been prepared by one or more

23、 Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). TIA is not the author of the Document contents, but publishes and claims copyright to the Document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committ

24、ees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm. TIAs function is to administer the process, but not

25、the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). TIA does not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the

26、Document. In publishing the Document, TIA disclaims any undertaking to perform any duty owed to or for anyone. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more partie

27、s. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and discla

28、ims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the

29、 contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTY

30、S INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY P

31、RODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, IN

32、CIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGO

33、ING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by the TIA and may not be reproduced without prior permission of the Telecommunica

34、tions Industry Association. For information consult our website at http:/www.tiaonline.org/about/faqDetail.cfm?id=18 Organizations may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: Global Engineering Documents 15 Invern

35、ess Way East Englewood, CO 80112-5704 U.S.A. or call U.S.A. and Canada 1-800-854-7179, International (303) 397-7956 TIA/EIA-568-B.2-5 Corrections to TIA/EIA-568-B.2 TABLE OF CONTENTS 1 INTRODUCTION .2 2 CLAUSE REVISIONS2 D.5.2 Applicability .2 D.5.8 De-embedding reference jack NEXT loss measurement

36、2 D.6 Modular test plug construction2 1 TIA/EIA-568-B.2-5 2 1 INTRODUCTION The purpose of this addendum is to correct certain references in TIA/EIA-568-B.2. These revisions are identified in the following text with additions shown in bold italics and deletions shown as strikeout. Other paragraphs in

37、 the clause, or in TIA/EIA-568-B.2 that are not shown remain the same. 2 CLAUSE REVISIONS D.5.2 Applicability For the purposes of this Standard, a modular test plug consists of short lengths of solid or stranded UTP twisted-pair conductors with a modular plug terminated on one end. Modular test plug

38、s may be constructed from cross-connect (patch) and equipment cords. Clause D.7 specifies a systematic termination procedure that may be used to manufacture a set of plugs likely to satisfy the modular test plug requirements of clause D.6.10 D.5.10. D.5.8 De-embedding reference jack NEXT loss measur

39、ement Measure the NEXT loss of the de-embedding reference plug mated to the de-embedding reference jack for all 6 pair combinations as shown in figure D.8. Maintain correct wire pair polarity as specified in clause D.6.5 D.5.6. D.6 Modular test plug construction It is necessary to obtain a set of te

40、st plugs that complies with clause D.6.10 D.5.10, to perform connecting hardware testing. It is acceptable to obtain these test plugs by cutting them from the ends of production patch cords. Because of the variation in production cords, and the large number of plugs that might be required to obtain

41、test plugs, the following alternate procedure is suggested. I consent to CSA collecting and using the above information to facilitate the collection of my suggestions and comments. Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Jaccepte qu

42、e la CSA conserve et utilise les renseignements ci-dessus afin de faciliter la rceptionde mes suggestions et commentaires.Consultez la politique CSA en matire de confidentialit au www.csagroup.org/legal pour savoir comment nous protgeons vos renseignements personnels.Nhsitez pas nous faire part de v

43、os suggestions et de vos commentaires. Au moment de soumettre des propositions de modification aux normes CSA et autres publications CSA prire de fournir les renseignements demands ci-dessous et de formuler les propositions sur une feuille volante. Il est recommand dinclurele numro de la norme/publi

44、cationle numro de larticle, du tableau ou de la figure visla formulation proposela raison de cette modification.Proposition de modificationCSA welcomes your suggestions and comments. To submit your proposals for changes to CSA Standards and other CSA publications, please supply the information reque

45、sted below and attach your proposal for change on a separate page(s). Be sure to include theStandard/publication numberrelevant Clause, Table, and/or Figurenumber(s)wording of the proposed changerationale for the change.Proposalfor changeNom/Name: Affiliation: Adresse/Address: Ville/City: tat/Province/State: Pays/Country: Code postal/Postal/Zip code: Tlphone/Telephone: Tlcopieur/Fax: Date: ISBN 1-55397-854-4PRINTEDINCANADAIMPRIMEAU CANADA