CSA Z107 10-2006 Guide for the use of acoustical Standards in Canada (First Edition).pdf

1、Z107.10-06Guide for the use of acoustical Standards in CanadaLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing vari

2、ed viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis docum

3、ent is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys

4、intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS

5、 VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINES

6、S INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY

7、OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The informatio

8、n in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit comp

9、any that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in p

10、rinted or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inven

11、tions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress fo

12、r such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this documen

13、t is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document. Limited copies of this document in print or paper form may be distributed only to person

14、s who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; o

15、r.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of th

16、is document constitutes your acceptance of the terms and conditions of this Legal Notice.NameOrganizationAddressCityProvince/StateCountry Postal/Zip CodeE-mailI consent to CSA collecting and using the above information to send me updates relating to this publication.Visit CSAs policy on privacy at w

17、ww.csagroup.org/legal to find out how we protect your personal information.Z107.10-06CSA Standards Update ServiceZ107.10-06February 2006Title: Guide for the use of acoustical Standards in CanadaPagination: 24 pages (viii preliminary and 16 text), each dated February 2006Automatic notifications about

18、 any updates to this publication are available. To register for e-mail notifications, and/or to download any existing updates in PDF, enter the Online Store at www.ShopCSA.ca and click on My Account on the navigation bar.The List ID for this document is 2018761.To receive printed updates, please com

19、plete and return the attached card.AffranchirsuffisammentPlaceStamp HereASSOCIATION CANADIENNE DENORMALISATIONBUREAU CENTRAL DE LINFORMATION5060, SPECTRUM WAY, BUREAU 100MISSISSAUGA ON L4W 5N6CANADACANADIAN STANDARDSASSOCIATIONCONSOLIDATED MAILING LIST5060 SPECTRUM WAY, SUITE 100MISSISSAUGA ON L4W 5

20、N6CANADAPublished in February 2006 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caZ107.10-06Guide for the use of acoustical Standards in

21、CanadaCSA StandardISBN 1-55436-135-4Technical Editor: Dave Shanahan Canadian Standards Association 2006All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.February 2006 iiiContents Canadian Standards Association Guid

22、e for the use of acoustical Standards in CanadaTechnical Committee on Acoustics and Noise Control viPreface viii1Scope 12Terminology 12.1 Introduction 12.2 ANSI S1.1-1994 (R2004), Acoustical Terminology 13 Building acoustics 13.1 Introduction 13.2 ASTM C 384-04, Standard Test Method for Impedance an

23、d Absorption of Acoustical Materials by Impedance Tube Method 23.3 ASTM C 423-02a, Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method 23.4 ASTM E 90-04, Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Bu

24、ilding Partitions and Elements 23.5 ASTM E 336-05, Standard Test Method for Measurement of Airborne Sound Insulation in Buildings 23.6 ASTM E 413-04, Classification for Rating Sound Insulation 33.7 ASTM E 492-04, Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Fl

25、oor-Ceiling Assemblies Using the Tapping Machine 33.8 ASTM E 596-96(2002)e1, Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures 33.9 ASTM E 795-00, Standard Practices for Mounting Test Specimens During Sound Absorption Tests 33.10 ASTM E 966-04, Standard

26、 Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements 43.11 ASTM E 989-89(1999), Standard Classification for Determination of Impact Insulation Class (IIC) 43.12 ASTM E 1007-04e1, Standard Test Method for Field Measurement of Tapping Machine Impact Sound

27、Transmission Through Floor-Ceiling Assemblies and Associated Support Structures 43.13 ASTM E 1332-90(2003), Standard Classification for Determination of Outdoor-Indoor Transmission Class 43.14 ASTM E 2179-03e2, Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings i

28、n Reducing Impact Sound Transmission Through Concrete Floors 54 Acoustical measuring equipment and calibration 54.1 ANSI S1.4-1983 (R2001), Specification for Sound Level Meters 54.2 ANSI S1.11-2004, Specification for Octave-Band and Fractional-Octave-Band Analog and Digital Filters 54.3 ANSI S1.13-2

29、005, Measurement of Sound Pressure Levels in Air 54.4 IEC 61672-1:2002, Electroacoustics Sound level meters Part 1: Specifications 65 Environmental noise 65.1 ISO 9613-1:1993, Acoustics Attenuation of sound during propagation outdoors Part 1: Calculation of the absorption of sound by the atmosphere

30、65.2 ISO 9613-2:1996, Acoustics Attenuation of sound during propagation outdoors Part 2: General method of calculation 65.3 CAN/CSA-ISO 1996-1:05, Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures 75.4 CAN/CSA-ISO 1996-2:05, A

31、coustics Description and measurement of environmental noise Part 2: Acquisition of data pertinent to land use 7Z107.10-06 Canadian Standards Associationiv February 20065.5 CAN/CSA-ISO 1996-3:05, Acoustics Description and measurement of environmental noise Part 3: Application to noise limits 76 Heari

32、ng measurement and protection 76.1 CAN/CSA-Z94.2-02, Hearing Protection Devices Performance, Selection, Care, and Use 76.2 CSA CAN3-Z107.4-M86 (R2001), Pure Tone Air Conduction Audiometers for Hearing Conservation and for Screening 86.3 CAN/CSA-Z107.6-M90 (R2004), Pure Tone Air Conduction Threshold

33、Audiometry for Hearing Conservation 87 Human exposure to vibration 87.1 CAN/CSA-M5007-03, Agricultural wheeled tractors Operators seat Laboratory measurement of transmitted vibration 87.2 CAN/CSA-M5008-03, Agricultural wheeled tractors and field machinery Measurement of whole-body vibration of the o

34、perator 87.3 ISO 5349-1:2001, Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements 87.4 ISO 5349-2:2001, Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance

35、for measurement at the workplace 98 Industrial noise 98.1 CSA Z107.52-M1983 (R2004), Recommended Practice for the Prediction of Sound Pressure Levels in Large Rooms Containing Sound Sources 98.2 CSA CAN3-Z107.54-M85 (R2001), Procedure for Measurement of Sound and Vibration Due to Blasting Operations

36、 98.3 CAN/CSA-Z107.55-M86 (R2001), Recommended Practice for the Prediction of Sound Levels Received at a Distance from an Industrial Plant 98.4 CSA Z107.56-06, Procedures for the measurement of occupational noise exposure 98.5 CAN/CSA-Z107.58-02, Noise Emission Declarations for Machinery 108.6 ISO 3

37、740:2000, Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards 108.7 ISO 3741:1999, Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for reverberation rooms 108.8 ISO 3743-1:1994, Acoustics Deter

38、mination of sound power levels and noise sources Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method for hard-walled test rooms 118.9 ISO 3743-2:1994, Acoustics Determination of sound power levels and noise sources using sound pressure Engineering methods f

39、or small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms 118.10 ISO 3744:1994, Acoustics Determination of sound power levels and noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane 118.11 ISO 3745:2003

40、, Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for anechoic and hemi-anechoic rooms 118.12 ISO 3746:1995, Acoustics Determination of sound power levels of noise sources using sound pressure Survey method using an enveloping measurement surface

41、 over a reflecting plane 128.13 ISO 3747:2000, Acoustics Determination of sound power levels of noise sources using soundpressure Comparison method in situ 128.14 ISO 4871:1996, Acoustics Declaration and verification of noise emission values of machinery and equipment 128.15 ISO 6926:1999, Acoustics

42、 Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels 128.16 ISO 9614-1:1993, Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points 12 Canadian Standards Asso

43、ciation Guide for the use of acoustical Standards in CanadaFebruary 2006 v8.17 ISO 9614-2:1996, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning 138.18 ISO 9614-3:2002, Acoustics Determination of sound power levels of noise sources

44、using sound intensity Part 3: Precision method for measurement by scanning 138.19 ISO 11201:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a

45、 reflecting plane 138.20 ISO 11202:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Survey method in situ 138.21 ISO 11203:1995, Acoustics Noise emitted by machinery and equipment Determination o

46、f emission sound pressure levels at a work station and at other specified positions from the sound power level 148.22 ISO 11204:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Method requiring e

47、nvironmental corrections 148.23 ISO 11205:2003, Acoustics Noise emitted by machinery and equipment Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity 149 Noise from powered machines (constructi

48、on and agriculture) 149.1 Introduction 149.2 CAN/CSA-M5131-97 (R2002), Acoustics Tractors and machinery for agriculture and forestry Measurement of noise at the operators position Survey method 159.3 ISO 4872:1978, Acoustics Measurement of airborne noise emitted by construction equipment intended fo

49、r outdoor use Method for determining compliance with noise limits 159.4 ISO 6393:1998, Acoustics Measurement of exterior noise emitted by earth-moving machinery Stationary test conditions 159.5 ISO 6394:1998, Acoustics Measurement at the operators position of noise emitted by earth-moving machinery Stationary test conditions 159.6 ISO 6395:1988, Acoustics Measurement of exterior noise emitted by earth-moving machinery Dynamic test condi