CLC TR 62453-503-2-2009 Field device tool (FDT) interface specification - Part 503-2 Communication implementation for common object model - IEC 61784 CP 3 4 CP 3 5 and CP 3 6《现场装置工.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 503-2: Communication implementation for common object model IEC 61784 CP 3/4, CP 3/5 and CP 3/6PD CLC/TR 62453-503-2:2009Natio

2、nal forewordThis Published Document is the UK implementation of CLC/TR 62453-503-2:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this commit

3、tee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62571 8ICS 25.040.40; 35.100.05; 35.110Compliance with a British Standard cannot confer imm

4、unity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDPD CLC/TR 62453-503-2:2009TECHNICAL REPORT CLC/TR 62453-503-2 RAPPORT TE

5、CHNIQUE TECHNISCHER BERICHT November 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitatio

6、n in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TR 62453-503-2:2009 E ICS 25.040.40; 35.100.05; 35.110 English version Field device tool (FDT) interface specification - Part 503-2: Communication implementation for common object model - IEC 61784 CP 3/4, CP 3/5 and

7、 CP 3/6 (IEC/TR 62453-503-2:2009) Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 503-2: Implmentation des communications pour le modle objet commun - CEI 61784 CP 3/4, CP 3/5 et CP 3/6 (CEI/TR 62453-503-2:2009) Field Device Tool (FDT)-Schnittstellenspezifikation - T

8、eil 503-2: Kommunikationsimplementierung mit dem allgemeinen Objektmodell (COM) - Kommunikationsprofile (CP) 3/4, 3/5 und 3/6 nach IEC 61784 (IEC/TR 62453-503-2:2009) This Technical Report was approved by CENELEC on 2009-10-01. CENELEC members are the national electrotechnical committees of Austria,

9、 Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. PD CL

10、C/TR 62453-503-2:2009CLC/TR 62453-503-2:2009 - 2 - Foreword The text of document 65E/68/CDV, future edition 1 of IEC/TR 62453-503-2, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENEL

11、EC parallel vote and was approved by CENELEC as CLC/TR 62453-503-2 on 2009-10-01. This standard is to be used in conjunction with EN 62453-3xy series. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Technical Report IEC/TR 62453-503-2:2009 was approved by CENELEC as a Techni

12、cal Report without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61784-2 NOTE Harmonized as EN 61784-2:2008 (not modified). _ PD CLC/TR 62453-503-2:2009- 3 - CLC/TR 62453-503-2:2009 Annex ZA (normative) Normative refer

13、ences to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (i

14、ncluding any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidance EN 62

15、453-1 2009 IEC 62453-2 2009 Field device tool (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 2009 IEC/TR 62453-41 2009 Field device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model CLC/TR 62453-41 2009 IEC 6245

16、3-303-2 2009 Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 EN 62453-303-2 2009 _ PD CLC/TR 62453-503-2:2009 2 TR 62453-503-2 IEC:2009(E) CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, defini

17、tions, symbols, abbreviated terms and conventions 6 3.1 Terms and definitions 6 3.2 Symbols and abbreviated terms.6 3.3 Conventions 7 3.3.1 Data type names and references to data types 7 3.3.2 Vocabulary for requirements7 4 Bus category 7 5 Access to instance and device data7 6 Protocol specific usa

18、ge of general data types.7 7 Network management data types8 7.1 General .8 7.2 PNIO device address.8 7.3 Bus configuration FDTProfinetIOParameterSchema .8 8 Communication data types FDTProfinetIOCommunicationSchema.11 9 Channel parameter data types FDTProfinetIOChannelParameterSchema13 10 Device ide

19、ntification .14 10.1 Device type identification data types FDTProfinetIOIdentSchema.14 10.2 Topology scan data types DTMProfinetIODeviceSchema15 10.3 Scan identification data types FDTProfinetIOScanIdentSchema .15 10.4 Device type identification data types FDTProfinetIODeviceIdentSchema 17 10.5 XSLT

20、 Transformation 18 Bibliography26 Figure 1 Part 503-2 of the IEC 62453 series 5 Table 1 Protocol specific usage of general data types7 PD CLC/TR 62453-503-2:2009TR 62453-503-2 IEC:2009(E) 5 INTRODUCTION This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) co

21、mponents for function control and data access within a client/server architecture. The specification is a result of an analysis and design process to develop standard interfaces to facilitate the development of servers and clients by multiple vendors that need to interoperate seamlessly. With the in

22、tegration of fieldbusses into control systems, there are a few other tasks which need to be performed. In addition to fieldbus- and device-specific tools, there is a need to integrate these tools into higher-level system-wide planning- or engineering tools. In particular, for use in extensive and he

23、terogeneous control systems, typically in the area of the process industry, the unambiguous definition of engineering interfaces that are easy to use for all those involved is of great importance. A device-specific software component, called DTM (Device Type Manager), is supplied by the field device

24、 manufacturer with its device. The DTM is integrated into engineering tools via the FDT interfaces defined in this specification. The approach to integration is in general open for all kind of fieldbusses and thus meets the requirements for integrating different kinds of devices into heterogeneous c

25、ontrol systems. Figure 1 shows how IEC/TR 62453-503-2 is aligned in the structure of IEC 62453 series. Part 502Communicationimplementationfor common object model IEC 61784 CP 3/4,CP 3/5 and CP 3/6Part 503-2 Figure 1 Part 503-2 of the IEC 62453 series PD CLC/TR 62453-503-2:2009 6 TR 62453-503-2 IEC:2

26、009(E) FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 503-2: Communication implementation for common object model IEC 61784 CP 3/4, CP 3/5 and CP 3/6 1 Scope IEC/TR 62453-503-2, which is a technical report, provides information for integrating the PROFINET1technology into the implementation of

27、 the FDT interface specification (IEC/TR 62453-41). This part of IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it. 2 Normative references The following referenced documents are indispensable for the application of this sp

28、ecification. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies IEC 62453-1:2009,Field Device Tool (FDT) interface specification Part 1: Overview and guidance IEC 62453-2:2009,Field Device Too

29、l (FDT) interface specification Part 2: Concepts and detailed description IEC/TR 62453-41:2009, Field Device Tool (FDT) interface specification Part 41: Object model integration profile Common object model IEC 62453-303-2:2009, Field Device Tool (FDT) interface specification Part 303-2: Communicatio

30、n profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 3 Terms, definitions, symbols, abbreviated terms and conventions 3.1 Terms and definitions For the purpose of this document, the terms and definitions given in IEC 62453-1 and IEC 62453-2 apply. 3.2 Symbols and abbreviated terms For the pur

31、pose of this document, the symbols and abbreviations given in IEC 62453-1, IEC 62453-2 and the following apply. GSDML Generic Station Description Markup Language DCP Discovery and basic Configuration Protocol 1PROFINET is the trademark of PROFIBUS Nutzerorganisation e.V. (PNO). PNO is a non-profit t

32、rade organization to support the fieldbus PROFIBUS. This information is given for the convenience of users of this International Standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the registered tr

33、ademark. Use of the trademark PROFIBUS and PROFINET requires permission of the trade name holder. PD CLC/TR 62453-503-2:2009TR 62453-503-2 IEC:2009(E) 7 3.3 Conventions 3.3.1 Data type names and references to data types The conventions for naming and referencing of data types are explained in IEC 62

34、453-2 Clause A.1 3.3.2 Vocabulary for requirements The following expressions are used when specifying requirements. Usage of “shall” or “Mandatory” No exceptions allowed. Usage of “should” or “Recommended” Strong recommendation. It may make sense in special exceptional cases to differ from the descr

35、ibed behavior. Usage of “can or “Optional Function or behavior may be provided, depending on defined conditions. 4 Bus category IEC 61784 CP 3/3 protocol is identified in the attribute busCategory of the BusCategory element by the identifiers, as specified in IEC 62453-303-2. 5 Access to instance an

36、d device data Used at methods: IDtmParameter:GetParameters() IDtmParameter:SetParameters() These methods shall provide access to at least to all parameters defined in IEC 62453-303-2. 6 Protocol specific usage of general data types Table 1 shows how general data types are used with IEC 61784 CP 3/3

37、devices. Table 1 Protocol specific usage of general data types Attribute Description for use fdt:address fdt:protocolId fdt:deviceTypeId fdt:deviceTypeInformation fdt:deviceTypeInformationPath fdt:manufacturerId fdt:semanticId fdt:applicationDomain fdt:tag All these attributes of the FDTDatatype sch

38、ema are used as defined in IEC 62453-303-2. PD CLC/TR 62453-503-2:2009 8 TR 62453-503-2 IEC:2009(E) 7 Network management data types 7.1 General The data types specified in this clause are used at following methods: IDtmParameter:GetParameters IDtmParameter:SetParameters 7.2 PNIO device address The a

39、ddress information of a PNIO device is handled in the element. 7.3 Bus configuration FDTProfinetIOParameterSchema PD CLC/TR 62453-503-2:2009TR 62453-503-2 IEC:2009(E) 9 PD CLC/TR 62453-503-2:2009 10 TR 62453-503-2 IEC:2009(E) PD CLC/TR 62453-503-2:2009TR 62453-503-2 IEC:2009(E) 11 8 Communication da

40、ta types FDTProfinetIOCommunicationSchema The data types specified in this clause are used with the methods of IFdtCommunication. PD CLC/TR 62453-503-2:2009 12 TR 62453-503-2 IEC:2009(E) PD CLC/TR 62453-503-2:2009TR 62453-503-2 IEC:2009(E) 13 9 Channel parameter data types FDTProfinetIOChannelParame

41、terSchema The data types specified in this clause are used with the following methods: IFdtChannel:GetChannelParameters() IFdtChannel:SetChannelParameters() PD CLC/TR 62453-503-2:2009 14 TR 62453-503-2 IEC:2009(E) 10 Device identification 10.1 Device type identification data types FDTProfinetIOIdent

42、Schema PD CLC/TR 62453-503-2:2009TR 62453-503-2 IEC:2009(E) 15 10.2 Topology scan data types DTMProfinetIODeviceSchema Used at IDtmEvents:OnScanResponse() The XML document describes one entry, , in the list of scanned devices. 10.3 Scan identification data types FDTProfinetIOScanIdentSchema This sch

43、ema defines the XML document provided by a scan response of a network. PD CLC/TR 62453-503-2:2009 16 TR 62453-503-2 IEC:2009(E) PD CLC/TR 62453-503-2:2009TR 62453-503-2 IEC:2009(E) 17 10.4 Device type identification data types FDTProfinetIODeviceIdentSchema This subclause defines data types that are

44、 used to protocol specific information for device types. PD CLC/TR 62453-503-2:2009 18 TR 62453-503-2 IEC:2009(E) 10.5 XSLT Transformation ?xml version=“1.0“? !- This file is created by FDTProfinetIOIdentTransformation.xsl after transformation of ProfinetIODeviceIdentInstance.xml. - FDT xmlns=“x-sch

45、ema:DTMDeviceTypeIdentSchema.xml“ xmlns:ident=“x-schema:DTMIdentSchema.xml“ xmlns:fdt=“x-schema:FDTDataTypesSchema.xml“ PD CLC/TR 62453-503-2:2009TR 62453-503-2 IEC:2009(E) 19 /FDT ?xml version=“1.0“? !- This file is created by FDTProfinetIOIdentTransformation.xsl after transformation of ProfinetIOS

46、canIdentInstance.xml - FDT xmlns=“x-schema:DTMScanIdentSchema.xml“ xmlns:ident=“x-schema:DTMIdentSchema.xml“ xmlns:fdt=“x-schema:FDTDataTypesSchema.xml“ /FDT ProfinetIO DCP not applicable not applicable not applicable ProfinetIO DCP not applicable PD CLC/TR 62453-503-2:2009 20 TR 62453-503-2 IEC:200

47、9(E) Address ; not applicable not applicable not applicable not applicable ProfinetIO IM not applicable ProfinetIO IM PD CLC/TR 62453-503-2:2009TR 62453-503-2 IEC:2009(E) 21 not applicable not applicable Address ; IM_Serial_Number DeviceVendorValue DeviceVendorValue DeviceIdentNumber PD CLC/TR 62453

48、-503-2:2009 22 TR 62453-503-2 IEC:2009(E) DeviceIdentNumber DeviceRoleDetails Device Role DeviceRoleDetails Device Role ManufacturerSpecificString Manufacturer Specific Extension ManufacturerSpecificString Manufacturer Specific Extension IM_Software_Revision IM_Software_Revision IM_Hardware_Revision

49、 PD CLC/TR 62453-503-2:2009TR 62453-503-2 IEC:2009(E) 23 IM_Hardware_Revision IM_Profile_ID Profile ID IM_Profile_ID Profile ID IM_Profile_Specific_Type Profile Specific Type IM_Profile_Specific_Type Profile Specific Type IM_Order_ID Order ID IM_Order_ID Order ID PD CLC/TR 62453-503-2:2009 24 TR 62453-503-2 IEC:2009(E) PD CLC/TR 62