CLC TS 50568-8-2015 Electricity metering data exchange - The DLMS COSEM suite - Part 8 SMITP B-PSK PLC communication profile for neighbourhood networks - Including The Original-SMI.pdf

1、BSI Standards PublicationElectricity metering data exchange The DLMS/COSEM suitePart 8: SMITP B-PSK PLC communication profile for neighbourhood networks Including: The Original-SMITP PLC B-PSK communication profile, The Original-SMITP Local data exchange profile and The Original-SMITP IP communicati

2、on profilePD CLC/TS 50568-8:2015National forewordThis Published Document is the UK implementation of CLC/TS 50568-8:2015.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/13, Electricity Meters.A list of organizations represented on this committee can be obtained onrequ

3、est to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 85915 1ICS 35.240.60; 91.140.50Compliance with

4、a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 May 2015.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CLC/TS 50568-8:2015TECHNICAL SPE

5、CIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50568-8 April 2015 ICS 35.240.60; 91.140.50 English Version Electricity metering data exchange - The DLMS/COSEM suite - Part 8: SMITP B-PSK PLC communication profile for neighbourhood networks - Including: The Original-SMITP PLC B-PSK

6、 communication profile, The Original-SMITP Local data exchange profile and The Original-SMITP IP communication profile This Technical Specification was approved by CENELEC on 2014-11-11. CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS

7、 available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

8、 Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standard

9、ization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. CLC/TS 50568

10、-8:2015 E PD CLC/TS 50568-8:2015CLC/TS 50568-8:2015 - 2 - CONTENTS Foreword 9 Introduction . 10 1 Scope . 11 2 Normative references . 12 3 Acronyms and abbreviations, terms, definitions and notations 13 3.1 Acronyms and abbreviations 13 3.2 Terms and definitions 14 3.3 Notations . 15 4 The DLMS/COSE

11、M SMITP B-PSK PLC profile 16 4.1 Structure of the profile . 16 4.2 Physical layer 17 4.3 Data link layer . 17 4.4 Application to data link convergence layer . 17 4.5 Application layer 27 4.6 Application process . 27 4.7 PLC network management . 28 4.8 Addressing 31 4.9 System variables . 32 5 The Or

12、iginal-SMITP B-PSK PLC profile 33 5.1 Overview . 33 5.2 Structure of the profile . 33 5.3 Physical layer 34 5.4 Data Link layer 35 5.5 Application layer 35 5.6 SMITP Data model 35 5.7 Application process . 35 6 The Original-SMITP IP profile . 43 6.1 Overview . 43 6.2 Structure of profile . 43 6.3 Ph

13、ysical and data link layers . 44 6.4 Transport and network layers 44 6.5 Application layer 48 6.6 SMITP Data model 48 7 Original-SMITP Local Optical interface profile 49 7.1 Overview . 49 7.2 Physical layer 49 7.3 Data transmission protocol 50 7.4 Packets protocol format 51 7.5 Data Link Layer . 53

14、8 Discovery and registration services 55 8.1 DLMS/COSEM over B-PSK discovery and registration services . 55 8.2 Original-SMITP over B-PSK discovery and registration services 68 PD CLC/TS 50568-8:2015- 3 - CLC/TS 50568-8:2015 9 The Original-SMITP AL Services 75 9.1 Application messages exchanged in d

15、istribution line networks . 75 9.2 Application messages exchanged in telecommunication public networks . 107 9.3 Encryption, Authentication and Playback Attacks Protection 131 9.4 Enconding examples . 136 9.5 TCP/IP encapsulation example of SMITP TB Application layer message 141 10 The Original-SMIT

16、P Data model . 144 10.1 Introduction . 144 10.2 Internal parameters . 145 10.3 Total energies . 148 10.4 Daily energies . 149 10.5 Load profiles and setting parameters . 150 10.6 Communication address and keys of authentication . 153 10.7 Meter identification information 156 10.8 Temporal informatio

17、n . 157 10.9 Billing period information . 160 10.10 Software, Hardware and Security information 162 10.11 Supply contract information . 165 10.12 Weekly tariff information 169 10.13 Annual tariff information 179 10.14 Public holidays programming . 181 10.15 Load modulation parameters . 182 10.16 Vol

18、tage interruption information . 185 10.17 Voltage variation information . 191 10.18 Control information 197 10.19 Normal Status Word 200 10.20 Extended Status Word . 202 10.21 Cut-off device control information 204 10.22 Display management . 206 10.23 Download parameters 208 10.24 Measurand profiles

19、 and parameters . 211 10.25 Synchronized measurand registers 215 10.26 Event log management 219 10.27 Billing data information 221 10.28 Virtual billing data registers . 237 10.29 Time stamp of maximum power demand 246 10.30 Measurand information 252 10.31 Reading mode management 255 10.32 Managemen

20、t of logs events 256 Annex A (informative) Node discovery procedure example using the DLMS/COSEM SMITP B-PSK PLC profile 261 A.1 Node Discovery . 261 A.1.1 Discover nodes directly accessible from the Concentrator 261 A.1.2 Enable L1 meters to discover nodes not directly accessible from the Concentra

21、tor 263 A.1.3 Gathering discovered nodes from L1 meters 263 PD CLC/TS 50568-8:2015CLC/TS 50568-8:2015 - 4 - A.1.4 Repeating the process with L1 meters until no new meters are discovered . 265 A.2 Registration and routing management . 268 Annex B (informative) Node discovery procedure example using t

22、he Original-SMITP over B-PSK PLC profile 270 B.1 Node Discovery . 270 B.1.1 Discover nodes directly accessible from the Concentrator 272 B.1.2 Enable L1 meters to discover nodes not directly accessible from the Concentrator 272 B.1.3 Gathering discovered nodes from L1 meters 272 B.1.4 Repeating the

23、process with L1 meters until no new meters are discovered . 274 B.2 Registration and routing management . 278 Annex C (informative) SMITP specific definitions . 280 C.1 Management of reserved elements 280 C.2 ECTL structure 280 Annex D (normative) MIB and COSEM Set-up class interface 281 D.1 General

24、 . 281 D.2 Types definition . 281 D.3 SMITP configuration attributes . 281 D.4 SMITP statistical attributes 284 Annex E (informative) Specification of communication mode F for direct local data exchange 285 E.1 Introduction . 285 E.2 Mode F for direct local data exchange . 285 E.2.1 General 285 E.2.

25、2 Sign-on flow . 285 E.2.3 Physical layer primitives . 286 E.2.4 Timers . 287 E.3 Sign on example 287 E.3.1 Identifier request -300 baud- (TP) 287 E.3.2 Meter identifier response from meter -300 baud- 287 E.3.3 Work mode selection -300 baud- (HHU) . 288 List of figures Figure 1 Document structure of

26、 CLC/TS 50568-8 . 11 Figure 2 The DLMS/COSEM SMITP B-PSK PLC communication profile . 16 Figure 3 Services of the COSEM to B-PSK convergence layer . 18 Figure 4 Type 1 CLPDU format 20 Figure 5 Type 2 CLPDU format 20 Figure 6 Control field format 21 Figure 7 Sequence chart of a CL transfer not requiri

27、ng segmentation 22 Figure 8 sequence chart of a CL transfer requiring segmentation at both sides 23 Figure 9 sequence chart of a CL transfer requiring segmentation using the unconfirmed service 25 PD CLC/TS 50568-8:2015- 5 - CLC/TS 50568-8:2015 Figure 10 Meters state diagram . 31 Figure 11 Reference

28、 communication architecture . 32 Figure 12 Protocol stack for SMITP on PLC . 33 Figure 13 Meters state diagram . 36 Figure 14 Synchronization without protection . 37 Figure 15 Synchronization with protection 37 Figure 16 Individual registers reading 37 Figure 17 Table registers reading 38 Figure 18

29、Individual registers writing 38 Figure 19 Table registers writing 38 Figure 20 Download procedure 40 Figure 21 Reference communication architecture . 43 Figure 22 Protocol stack for SMITP on IP 44 Figure 23 Connection Opening . 47 Figure 24 Data exchange . 47 Figure 25 Connection Closing 48 Figure 2

30、6 Optical interface protocl stack 49 Figure 27 Messages sequence in connection procedure between meter and HHU . 50 Figure 28 Connection request message . 52 Figure 29 Identification response message 52 Figure 30 Acknowledgement message . 53 Figure 31 MAC frame structure 53 Figure 32 Discover messag

31、es exchange 58 Figure 33 DiscoverReport messages exchange 59 Figure 34 TCTset messages exchange 60 Figure 35 DiscoverForward messages exchange . 61 Figure 36 DiscoverForwardReport messages exchange . 63 Figure 37 Status messages exchange 64 Figure 38 Register messages exchange . 65 Figure 39 Registe

32、rReport messages exchange 66 Figure 40 Deregister messages exchange . 67 Figure 41 Ping.request messages exchange 68 Figure 42 Ping.response messages exchange . 68 Figure 43 Subnets of the network . 75 Figure 44 Request A-Node to transmit data to B-Node . 97 Figure 45 Request A-Node to transmit data

33、 to B-Node: B-Node does not answer . 98 Figure 46 Structure of messages exchanged in telecommunication networks . 108 Figure 47 Structure of Message Header . 109 Figure 48 Structure of Message Data . 109 Figure 49 TB messages exchange in the On-Line transaction 113 Figure 50 Error condition during t

34、he transaction . 114 PD CLC/TS 50568-8:2015CLC/TS 50568-8:2015 - 6 - Figure 51 TB messages exchange in the Off-Line transaction 115 Figure 52 Messages to cancel a transaction required by AMM system . 115 List of tables Table 1 Convergence layer error management scheme 26 Table 2 Example of message s

35、tructure to be displayed 42 Table 3 Standard ASCII control characters 51 Table 4 Baud Rate coded values 53 Table 5 Discover service 58 Table 6 Discover service arguments 58 Table 7 DiscoverReport service . 59 Table 8 DiscoverReport service arguments 59 Table 9 TCTset service 60 Table 10 TCTSet servi

36、ce arguments 60 Table 11 DiscoverForward service . 61 Table 12 DiscoverForward service arguments 61 Table 13 DiscoverForwardReport service . 62 Table 14 DiscoverForwardReport service arguments . 62 Table 15 Status service . 63 Table 16 Status service arguments 63 Table 17 Register service 64 Table 1

37、8 Register service arguments . 64 Table 19 RegisterReport service 65 Table 20 RegisterReport service arguments . 65 Table 21 Deregister service . 66 Table 22 Deregister service arguments 66 Table 23 Ping service 67 Table 24 Ping service arguments . 67 Table 25 Chl.Req 112 message . 69 Table 26 Chl.R

38、esp 113 message 69 Table 27 Address.Req 090 message 70 Table 28 TCT_Set.Req 092 message . 71 Table 29 ReqAddr.Req 094 message . 71 Table 30 Address.Resp 091 message 72 Table 31 ReqAddr.Resp 095 message . 73 Table 32 Structure of Struct Address.Resp 73 Table 33 NACK.RESP 247 message 74 Table 34 Appli

39、cation messages in distribution line network 77 Table 35 Write.Req 004 message for clock synchronization . 79 Table 36 - Write.Req 004 message for general parameter writing . 79 Table 38 WriteTab.Req 010 message 81 PD CLC/TS 50568-8:2015- 7 - CLC/TS 50568-8:2015 Table 39 WriteTab.Req 110 message 82

40、Table 40 SetTab.Req 014 message . 83 Table 41 SetTab.Req 114 message . 84 Table 42 Example of a table set command . 85 Table 43 ResetTab.Req 016 message . 85 Table 44 ResetTab.Req 116 message . 86 Table 45 Read.Req 002 message 87 Table 46 Read.Resp 003 message 87 Table 47 ReadTab.Req 006 message 88

41、Table 48 ReadTab.Resp 007 message . 88 Table 49 ReadTab.Req 008 message (block read) . 89 Table 50 ReadTab.Resp 009 message (block read) . 89 Table 51 GetTab.Req 030 message . 90 Table 52 GetTab.Resp 031 message . 91 Table 53 Authenticated Read.Req 102 message 91 Table 54 Authenticated Read.Resp 103

42、 message 92 Table 55 Authenticated ReadTab.Req 106 message 93 Table 56 Authenticated ReadTab.Resp 107 message 93 Table 57 Authenticated ReadTab.Req 108 message (block read). 94 Table 58 Authenticated ReadTab.Resp 109 message (block read) . 95 Table 59 Authenticated GetTab.Req 130 message . 95 Table

43、60 Authenticated GetTab.Resp 131 message . 96 Table 61 SetIC.Req 040 message 97 Table 62 Authenticated SetIc.Req 140 message 98 Table 63 WriteTabIC.Req 042 message . 99 Table 64 Authenticated WriteTabIc.Req 142 message . 100 Table 65 Reprog 100 message (local programming) 101 Table 66 Reprog 101 mes

44、sage (broadcast programming) 101 Table 67 Command 018 message 102 Table 68 Authenticated Command 118 message 102 Table 69 A-Node ACK 253 message 103 Table 70 Authenticated A-Node ACK 243 message 104 Table 71 A-Node NACK 255 message 104 Table 72 Authenticated A-Node NACK 245 message . 104 Table 73 Co

45、ding of field Value in A-Node Nack messages . 105 Table 74 Coding of sub field SSAP in LLC frame . 105 Table 75 B-Node ACK 251 message 106 Table 76 Authenticated B-Node ACK 241 message 106 Table 77 B-Node NACK 249 message 106 Table 78 Authenticated B-Node NACK 239 message . 107 Table 79 Coding of fi

46、eld Value in B-Node Nack messages . 107 PD CLC/TS 50568-8:2015CLC/TS 50568-8:2015 - 8 - Table 80 Relationship between Message Code, Prot and Action fields . 110 Table 81 General description of a message using SMITP references . 110 Table 82 TB Message example 1 . 111 Table 83 PLC translation of prev

47、ious TB message . 111 Table 84 TB Message example 2 . 111 Table 85 PLC translation of previous TB message . 111 Table 86 TB application messages in telecommunication public network 111 Table 87 TB Write.Req 004 message (single programming of one parameter) 116 Table 88 TB Write.Req 004 message (sing

48、le programming of more parameters) 116 Table 89 TB Sinc.Req 034 message 117 Table 90 TB WriteTab.Req 010 message . 118 Table 91 TB SetTab.Req 014 message 119 Table 92 TB ResetTab 016 message . 119 Table 93 TB GetTab.Req 030 message 120 Table 94 TB GetTab.Resp 031 message 121 Table 95 TB Read.Req 002 message . 121 Table 96 TB Read.Resp 003 message . 122 Table 97 TB ReadTab.Req 006 message . 123 Table 98 TB ReadTab.Resp 007 message . 123 Table 99 TB ReadTab.Req 008 message (entire table) 124 Table 100 TB ReadTab.Resp 009 message (entire table) . 124 Table 101 TB Com