DIN 13-7-1999 ISO general purpose metric screw threads - Part 7 Nominal sizes for 2 mm fine pitch threads nominal diameter from 17 mm to 300 mm《ISO一般用途米制螺纹 第7部分 螺距2mm的细牙螺纹的标称尺寸 螺纹标.pdf

1、DEUTSCHE NORM November 1999 General purpose IS0 metric screw threads Part 7: Nominal sizes for 2 mm fine pitch threads with diameters from 17 mm to 300 mm DIN - 13-7 ICs 21.040.10 Supersedes Metrisches ISO-Gewinde allgemeiner Anwendung - Teil 7: Nennmae fr Feingewinde mit Steigung 2 mm - Gewinde-Nen

2、ndurchmesser von 17 mm bis 300 mm December 1986 edition. In keeping with current practice in standards published by the International Organization for Standardization (ISO), a comma has been used throughout as the decimal marker. Foreword This standard has been prepared by Technical Committee Gewind

3、e of the Normenausschu Technische Grundlagen (Fundamentals in Technology Standards Committee). The adoption of a number of IS0 Standards (e.g. IS0 724, IS0 965 series) as national standards led the responsible committee to revise the DIN 13 series of standards. The nominal sizes are now based both o

4、n the basic dimensions specified in DIN IS0 724 and on the nominal profiles specified in DIN 13-19. The nominal sizes of the external thread minor diameters specified here have been calculated taking the root radius as being equal to H/6. The thread designation is to be found in DIN IS0 965-1. See t

5、he table in the Explanatory notes of DIN 13-1 for an overview of DIN and DIN IS0 Standards for screw threads. Amendments This standard differs from the December 1986 edition in that the nominal sizes are now to be calculated on the basis of DIN 13-1 9. Previo us edit ions DIN 13-38: 1961 -04, 1964-0

6、6; DIN 242: 1923-02; DIN 247: 1943-09, 1952-1 2; DIN 13-7: 1970-09, 1986-1 2. Continued on pages 2 to 6. Translation by DI N-Sprachendienst. In case of doubt, the German-language original should be consulted as the authoritative text No pari of this translation may be reproduced without the prior pe

7、rmission of Ref. No. DIN 13-7 : 1999-1 . V Deutsches Institut fur Normung e VI Berlin Luth Verlag GmbH, D-10772 Berlin, hac the exclusive right of sale for German Standards (DIN-Normen) English price group O7 Sales No 0107 04 O0 Page 2 DIN 13-7 : 1999-1 1 All dimensions are in mm. 1 Scope This stand

8、ard applies to general purpose IS0 metric screw threads. It specifies the nominal sizes for 2 mm fine pitch threads with diameters from 17 mm to 300 mm having the basic profile specified in DIN IS0 68-1 and the nominal profile specified in DIN 13-1 9. 2 Normative references This standard incorporate

9、s, by dated or undated reference, provisions from other publications. These norma- tive references are cited at the appropriate places in the text, and the titles of the publications are listed below. For dated references, subsequent amendments to or revisions of any of these publications apply to t

10、his standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. DIN 13-19 DIN 13-21 DIN 13-22 DIN 13-23 DIN 13-24 DIN 13-25 DIN 13-26 DIN 2244 DIN IS0 68-1 DIN IS0 724 DIN IS0 965-1 General purpose IS0 metric scre

11、w threads - Nominal profiles General purpose IS0 metric screw threads - Limits of size for 1 mm to 24,5 mm diameter fine pitch threads with preferred tolerance classes General purpose IS0 metric screw threads - Limits of size for 25 mm to 52 mm diameter fine pitch threads with preferred tolerance cl

12、asses General purpose IS0 metric screw threads - Limits of size for 53 mm to 11 O mm diameter fine pitch threads with preferred tolerance classes General purpose IS0 metric screw threads - Limits of size for 1 12 mm to 180 mm diameter fine pitch threads with preferred tolerance classes General purpo

13、se IS0 metric screw threads - Limits of size for 182 mm to 250 mm diameter fine pitch threads with preferred tolerance classes General purpose IS0 metric screw threads - Limits of size for 252 mm to 1 O00 mm diameter fine pitch threads with preferred tolerance classes Screw threads - Terminology Gen

14、eral purpose IS0 screw threads - Basic profile - Part 1: Metric screw threads General purpose IS0 metric screw threads - Basic dimensions (IS0 724 : 1993) General purpose IS0 metric screw threads - Tolerances - Part 1 : Principles and basic data (IS0 68-1 : 1998) (IS0 965-1 : 1998) 3 Concepts See DI

15、N 2244. 4 Dimensions and designation Nominal sizes shall be as shown in figure 1 and given in table 1. Choose series 1 diameters, series 2 diameters, or series 3 diameters (in order of preference). Screw threads with series 4 diameters are for special industrial applications only. Basic dimensions s

16、hall be as specified in DIN IS0 724, tolerances as in DIN IS0 965-1 and limits of size as in DIN 13-21 to DIN 13-26. Page 3 DIN 13-7 : 1999-1 1 17 19 21 Internal thread + + Diameters of Diameters of internal thread external thread 15,701 16,701 17,701 18,701 19,701 20.701 H 6 I) R = - ; the root pro

17、file may have a non-reversing curvature (cf. DIN IS0 965-1). Figure 1: Nominal thread profile IS0 metric screw threads shall be designated in accordance with DIN IS0 965-1. 14,546 15,546 16,546 17,546 18,546 19.546 Table 1: Nominal sizes 14,835 15,835 16,835 17,835 18,835 19.835 Nominal diameter, d

18、f= D) 23 26 34 35 38 I Pitch diameter, I Minor diameters, 21,701 20,546 20,835 22,701 21,546 21,835 23,701 22,546 22,835 24,701 23,546 23,835 25,701 24,546 24,835 26,701 25,546 25,835 28,701 27,546 27,835 30,701 29,546 29,835 31,701 30,546 30,835 32,701 31,546 31,835 33,701 32,546 32,835 34,701 33,5

19、46 33,835 36,701 35,546 35,835 37,701 36,546 36,835 38.701 37.546 37.835 40,701 43,701 46,701 39,546 39,835 42,546 42,835 45,546 45,835 Page 4 DIN 13-7 : 1999-1 1 diameter, : O) Series 3 Series 4 50 55 58 62 65 70 75 78 82 88 92 98 102 108 112 118 122 128 132 135 138 142 145 Series 1 Table 1 (contin

20、ued) Minor diameters, Pitch diameter, d3 Dl d, (= 02) 48,701 47,546 47,835 50,701 49,546 49,835 53,701 52,546 52,835 54,701 53,546 53,835 56,701 55,546 55,835 58,701 57,546 57,835 60,701 59,546 59,835 62,701 61,546 61,835 63,701 62,546 62,835 66,701 65,546 65,835 68,701 67,546 67,835 70,701 69,546 6

21、9,835 73,701 72,546 72,835 74,701 73,546 73,835 76,701 75,546 75,835 78,701 77,546 77,835 80,701 79,546 79,835 83,701 82,546 82,835 86,701 85,546 85,835 88,701 87,546 87,835 90,701 89,546 89,835 93,701 92,546 92,835 96,701 95,546 95,835 98,701 97,546 97,835 100,701 99,546 99,835 103,701 102,546 102,

22、835 106,701 105,546 105,835 108,701 107,546 107,835 110,701 109,546 109,835 113,701 112,546 1 12,835 116,701 1 15,546 1 15,835 118,701 1 17,546 1 17,835 120,701 1 19,546 11 9,835 123,701 122,546 122,835 126,701 125,546 125,835 128,701 127,546 127,835 130,701 129,546 129,835 133,701 132,546 132,835 1

23、36,701 135,546 135,835 138,701 137,546 137,835 140,701 139,546 139,835 143,701 142,546 142,835 (continued) 56 64 72 80 90 1 O0 110 125 1 40 Nominal Series 2 d( 52 60 68 76 85 95 105 115 120 130 Page 5 DIN 13-7 : 1999-1 1 Nominal diameter, d (=O) Series 1 Series 2 Series 3 Series 4 148 152 155 158 16

24、0 162 165 168 170 172 175 178 180 182 185 188 1 90 1 92 195 198 200 202 205 208 21 o 21 2 21 5 21 8 220 222 225 228 230 232 235 238 240 242 245 248 250 252 255 258 150 Table 1 (continued) Minor diameters, Pitch diameter, d3 Dl d, (= 02) 146,701 145,546 145,835 148,701 147,546 147,835 150,701 149,546

25、 149,835 153,701 152,546 152,835 155,701 155,546 155,835 157,701 157,546 157,835 160,701 159,546 159,835 163,701 162,546 162,835 166,701 165,546 165,835 168,701 167,546 167,835 170,701 169,546 169,835 173,701 172,546 172,835 176,701 175,546 175,835 178,701 177,546 177,835 180,701 179,546 179,835 183

26、,701 182,546 182,835 186,701 185,546 185,835 188,701 187,546 187,835 190,701 189,546 189,835 193,701 1 92,546 192,835 196,701 195,546 195,835 198,701 197,546 197,835 200,701 199,546 199,835 203,701 202,546 202,835 206,701 205,546 205,835 208,701 207,546 207,835 210,701 209,546 209,835 21 3,701 212,5

27、46 21 2,835 21 6,701 21 5,546 21 5,835 21 8,701 21 7,546 21 7,835 220,70 1 21 9,546 219,835 223,70 1 222,546 222,835 226,70 1 225,546 225,835 228,701 227,546 227,835 230,701 229,546 229,835 233,701 232,546 232,835 236,701 235,546 235,835 238,701 237,546 237,835 240,70 1 239,546 239,835 243,701 242,5

28、46 242,835 246,701 245,546 245,835 248,701 247,546 247,835 250,701 249,546 249,835 253,701 252,546 252,835 256,701 255,546 255,835 I (continued) Page 6 DIN 13-7 : 1999-1 1 Nominal diameter, d (=O) Series 1 Series 2 Series 3 Series 4 260 262 265 268 270 272 275 278 280 282 285 288 290 292 295 298 300

29、 Pitch diameter, d, (= 02) 258,701 260,701 263,701 266,701 268,701 270,701 273,701 276,701 278,701 280,701 283,701 286,701 288,701 290,701 293,701 296,701 298,701 d3 257,546 259,546 262,546 265,546 267,546 269,546 272,546 Dl 257,835 259,835 262,835 265,835 267,835 269,835 272,835 285,546 287,546 289,546 292,546 295,546 297,546 285,835 287,835 289,835 292,835 295,835 297,835