DIN 13-9-1999 ISO general purpose metric screw threads - Part 9 Nominal sizes for 4 mm fine pitch threads nominal diameter from 40 mm to 300 mm《ISO一般用途米制螺纹 第9部分 螺距4mm的细牙螺纹的标称尺寸 螺纹标.pdf

1、DEUTSCHE NORM November 1999 General purpose IS0 metric screw threads Part 9: Nominal sizes for 4 mm fine pitch threads with diameters from 40 mm to 300 mm DIN - 13-9 ICs 21.040.10 Supersedes Metrisches ISO-Gewinde allgemeiner Anwendung - Teil 9: Nennmae fr Feingewinde mit Steigung 4 mm - Gewinde-Nen

2、ndurchmesser von 40 mm bis 300 mm December 1986 edition. In keeping with current practice in standards published by the International Organization for Standardization (ISO), a comma has been used throughout as the decimal marker. Foreword This standard has been prepared by Technical Committee Gewind

3、e of the Normenausschu Technische Grundlagen (Fundamentals in Technology Standards Committee). The adoption of a number of IS0 Standards (e.g. IS0 724, IS0 965 series) as national standards led the responsible committee to revise the DIN 13 series of standards. The nominal sizes are now based both o

4、n the basic dimensions specified in DIN IS0 724 and on the nominal profiles specified in DIN 13-19. The nominal sizes of the external thread minor diameters specified here have been calculated taking the root radius as being equal to H/6. The thread designation is to be found in DIN IS0 965-1. See t

5、he table in the Explanatory notes of DIN 13-1 for an overview of DIN and DIN IS0 Standards for screw threads. Amendments This standard differs from the December 1986 edition in that the nominal sizes are now to be calculated on the basis of DIN 13-1 9. Previo us edit ions DIN 13-40: 1961-05, 1964-06

6、; DIN 242: 1923-02; DIN 245: 1923-02, 1943-09, 1952-12; DIN 13-9: 1970-09, 1986-1 2. Continued on pages 2 to 5. Translation by DI N-Sprachendienst. In case of doubt, the German-language original should be consulted as the authoritative text No pari of this translation may be reproduced without the p

7、rior permission of Ref. No. DIN 13-9 : 1999-1 - . . V Deutsches Institut fur Normung e VI Berlin Luth Verlag GmbH, D-10772 Berlin, hac the exclusive right of sale for German Standards (DIN-Normen) English price group O7 Sales No 0107 04 O0 Page 2 DIN 13-9 : 1999-1 1 All dimensions are in mm 1 Scope

8、This standard applies to general purpose IS0 metric screw threads. It specifies the nominal sizes for 4 mm fine pitch threads with diameters from 40 mm to 300 mm having the basic profile specified in DIN IS0 68-1 and the nominal profile specified in DIN 13-1 9. 2 Normative references This standard i

9、ncorporates, by dated or undated reference, provisions from other publications. These norma- tive references are cited at the appropriate places in the text, and the titles of the publications are listed below. For dated references, subsequent amendments to or revisions of any of these publications

10、apply to this standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. DIN 13-19 DIN 13-22 DIN 13-23 DIN 13-24 DIN 13-25 DIN 13-26 DIN 2244 DIN IS0 68-1 DIN IS0 724 DIN IS0 965-1 General purpose IS0 metric scre

11、w threads - Nominal profiles General purpose IS0 metric screw threads - Limits of size for 25 mm to 52 mm diameter fine pitch threads with preferred tolerance classes General purpose IS0 metric screw threads - Limits of size for 53 mm to 11 O mm diameter fine pitch threads with preferred tolerance c

12、lasses General purpose IS0 metric screw threads - Limits of size for 1 12 mm to 180 mm diameter fine pitch threads with preferred tolerance classes General purpose IS0 metric screw threads - Limits of size for 182 mm to 250 mm diameter fine pitch threads with preferred tolerance classes General purp

13、ose IS0 metric screw threads - Limits of size for 252 mm to 1 O00 mm diameter fine pitch threads with preferred tolerance classes Screw threads - Terminology General purpose IS0 screw threads - Basic profile - Part 1: Metric screw threads General purpose IS0 metric screw threads - Basic dimensions (

14、IS0 724 : 1993) General purpose IS0 metric screw threads - Tolerances - Part 1 : Principles and basic data (IS0 68-1 : 1998) (IS0 965-1 : 1998) 3 Concepts See DIN 2244. 4 Dimensions and designation Nominal sizes shall be as shown in figure 1 and given in table 1. Choose series 1 diameters, series 2

15、diameters, or series 3 diameters (in order of preference). Screw threads with series 4 diameters are for special industrial applications only. Basic dimensions shall be as specified in DIN IS0 724, tolerances as in DIN IS0 965-1 and limits of size as in DIN 13-22 to DIN 13-26. Page 3 DIN 13-9 : 1999

16、-1 1 37,402 39,402 42.402 P=4 Internal thread p I 35,093 35,670 37,093 37,670 40.093 40.670 E 45,402 47,402 49,402 52,402 53,402 55,402 - Diameters of internal thread 43,093 43,670 45,093 45,670 47,093 47,670 50,093 50,670 51,093 51,670 53,093 53,670 v Diameters of external thread 55,093 57,093 59,0

17、93 60,093 63,093 65,093 67,093 70,093 71,093 H 6 I) R = - ; the root profile may have a non-reversing curvature (cf. DIN IS0 965-1). Figure 1: Nominal thread profile IS0 metric screw threads shall be designated in accordance with DIN IS0 965-1. 55,670 57,670 59,670 60,670 63,670 65,670 67,670 70,670

18、 71,670 Table 1: Nominal sizes 87,402 I Nominal diameter. 85,093 I 85,670 Pitch diameter. I Minor diameters, 57,402 59,402 61.402 62,402 65,402 67,402 69,402 72,402 73.402 75,402 77,402 79.402 82,402 85,402 73,093 73,670 75,093 75,670 83,093 83,670 Page 4 DIN 13-9 : 1999-1 1 89,402 92,402 95,402 97,

19、402 99,402 102,402 105,402 107,402 109,402 1 12,402 1 15,402 1 17.402 Table 1 (continued) 87,093 87,670 90,093 90,670 93,093 93,670 95,093 95,670 97,093 97,670 100,093 100,670 103,093 103,670 105,093 105,670 107,093 107,670 1 10,093 1 10,670 1 13,093 1 13,670 1 15.093 1 15.670 i Pitch diameter, I Mi

20、nor diameters, 132,402 130,093 130,670 1 19,402 122,402 125,402 127,402 129,402 157,402 159,402 162,402 165,402 167,402 169,402 172,402 175,402 177.402 1 17,093 1 17,670 120,093 120,670 127,093 127,670 155,093 157,093 160,093 163,093 165,093 167,093 170,093 173,093 175.093 192,402 I 190,093 135,402

21、137,402 139.402 190,670 142,402 145,402 147,402 149,402 152,402 133,093 135,093 137.093 133,670 135,670 137.670 140,093 140,670 143,093 143,670 150,093 150,670 179,402 177,093 182,402 180,093 189,402 187,093 155,670 157,670 160.670 163,670 165,670 167,670 170,670 173,670 175,670 177,670 180,670 183,

22、670 185,670 187,670 (continued) I Page 5 DIN 13-9 : 1999-1 1 198 202 Table 1 (concluded) 195,402 193,093 193,670 197,402 195,093 195,670 199.402 197.093 197.670 Nominal 208 21 2 21 8 222 liameter, 0) Series 3 202,402 200,093 205,402 203,093 207,402 205,093 209,402 207,093 21 2,402 21 0,093 21 5,402

23、21 3,093 21 7,402 21 5,093 21 9,402 217,093 222.402 220.093 205 228 232 238 242 248 252 258 262 268 272 278 282 288 292 298 21 5 225,402 223,093 223,670 227,402 225,093 225,670 229,402 227,093 227,670 232,402 230,093 230,670 235,402 233,093 233,670 237,402 235,093 235,670 239,402 237,093 237,670 242

24、,402 240,093 240,670 245,402 243,093 243,670 247,402 245,093 245,670 249,402 247,093 247,670 252,402 250,093 250,670 255,402 253,093 253,670 257,402 255,093 255,670 259,402 257,093 257,670 262,402 260,093 260,670 265,402 263,093 263,670 267,402 265,093 265,670 269,402 267,093 267,670 272,402 270,093

25、 270,670 275,402 273,093 273,670 277,402 275,093 275,670 279,402 277,093 277,670 282,402 280,093 280,670 285,402 283,093 283,670 287,402 285,093 285,670 289,402 287,093 287,670 292,402 290,093 290,670 295,402 293,093 293,670 297,402 295,093 295,670 225 230 235 245 255 265 270 275 285 290 295 I Pitch diameter, Minor diameters, I 200,670 203,670 205,670 207,670 210,670 213,670 215,670 21 7,670 220.670